OP programming cable Siemens 6XV1 440-2KH32

Introduction to OEM Siemens OP programming cable

MPI extension cable 6ES7 901-0BF00-0AA0

Introduction to OEM Siemens PC/MPI

PC/MPI Siemens 6ES7972-0CA23-0XA0

Introduction to OEM Siemens PC/MPI

PC / MPI adapter is also known as PC adapter. It’s physical interface is the conversion from RS232 interfaces to the RS485,including the conversion from RS232 to MPI protocol (MultiPoint Interface).And it is used for the connecting between the PC COM (RS232) and MPI (RS485) of Siemens S7-300PLC.This product is non-isolate, choose PC / MPI + if you need an electro-optical isolation.

PC/MPI+ including RS232 cable 6ES7972-0CA23-0XA0

Introduction to OEM Siemens PC/MPI+ including RS232 cable

optoelectronic isolated RS232/MPI,Siemens S7-300/400 PLC Programming adapter cable,with communication indicator,can replace Siemens 6ES7 972-0CA23-0XA0,automatically adjust the communication speed  from 19.2Kbps to 115.2Kbps for the PC port,automatically adjust the communication speed from 19.2Kbps to 187.5Kbps for the MPI interface.Can connect PLC and the touch panel of third party factory to communicate.It doesn't support profibus function.

ETH Adapter CN Siemens S7-300/400PLC Ethernet adapter

Introduction to Siemens ETH Adapter CN

Siemens S7-300/400PLC Ethernet adapter,is used for the communication between S7-300/400PLC and Ethernet,Internet or 3G wireless network by the MPI or DP interface.No need to revise the communication protocol and software, support Dynamic DNS, user can remote control the PLC by the internet. The RJ45 port,RS485 interface and power supply port are all isolated in order to suit harsh environment in the industrial scene.

ETH Adapter CN is the industrial product which use the Ethernet and Internet or 3G wirelss network to achieve Siemens S7-300/400PLC networking communication. It integrates many complex network protocols, support TCP Server,TCP Client,UDP Unicast,UDP Multicast etc many modes.It has 10M/100M adaptive Ethernet interface and MPI and PROFIBUS interface which meets Siemens technical specifications.You only need to go on simple setting and then let the S7-300/400PLC go on network communication.

The RJ45 port,RS485 interface and power supply port are all isolated in order to suit harsh environment in the industrial situations. Especially the isolated power supply port and each signal pin has anti-static protection and surge protection which can solve the PLC communication port easily damaged problem.

◆ High-speed, reliable industry standard, anti-interference design suit for the harsh electromagnetic environment
◆ 32 bit RISC (NP7 series) ARM7TDMI 55DMIPS。
◆ 128KB SRAM,128KB Code + 32KB Boot。
◆10M/100M adaptive Ethernet interface
◆Support MPI and PROFIBUS communication protocol.
◆The largest baud rate is 1.5Mbps for MPI and Profibus interface.
◆Ethernet interface baud rate 9.6Kbps,19.2Kbps,38.4Kbps,57.6Kbps,115.2Kbps can be set.
◆Smart Protocols: TCP,UDP,ARP,IP,ICMP,DHCP,BOOTP,DNS.
◆Support Dynamic DNS
◆Working mode can be chose TCP Server,TCP Client,UDP Multicast and UDP Unicast.
◆Built-in Flash memory,can save the setted parameters
◆Support Windows 95/98/ME/NT/2000/XP/2003/XP/Vista/Win7 operation system.
◆RJ45 port 1500VDC electromagnetic isolated,RS485 interface 1000VDC electromagnetic isolated,power supply 1000VDC electromagnetic isolated
◆Interface protection: power supply port has the reverse polarity protection and over current protection,RS485 interface has the anti-lightning surge protection, repeatability surge capacity: Ipp=100A（10/700us，4KV）,meet standard ITU-TK20/21、VDE 0433. ±15KV ESD protection; overcurrent protection.
◆Power supply 24V±10% DC from PLC MPI or PROFIBUS socket,2W power.
◆Shape Size: 123mm×68mm×30mm(length*width*height),with the mounting bracket.
◆Temperature: -40°C to +80°C (-40°F to 176°F)，5% to 95% RH
◆Storage temperature: -40°C to +80°C (-40°F to 176°F)，5% to 95% RH.

The network type and fieldbus communication baud rate which ETH Adapter CN support

Transmission rate	MPI	PPI	PROFIBUS
			DP	Standard	Universal
9.6Kbps	-	-	√	√	√
19.2Kbps	√	-	√	√	√
45.45Kbps	-	-	√	√	√
93.75Kbps	-	-	√	√	√
187.5Kbps	√	-	√	√	√
500Kbps	-	-	√	√	√
1.5Mbps	√	-	√	√	√

Product Content                                                                              
1.ETH Adapter CN  1PC
2. RJ45 Cable 1 PC,  2 M
3.CD 1PC

 

Part#: ETH Adapter CN

Unit price:USD345.00/pc    

 

Here, user's manual PDF of ETH Adapter CN:

ETH Adapter CN USER MANUAL

 

More compatible PLC Programming cables of Siemens

CP5611

CP5611-A2

CP5512

CP5512EXP-NEW

PC Adapter CN-NEW

ES-ETH-PPI-NEW

ETH Adapter CN-NEW

USB/PPIM+

PC/PPI

PC/PPI+

USB/MPI+ V4.0

USB/MPI+ V2.0

PC/MPI+ including RS232 cable

PC/MPI

LOGO!USB-CABLE

LOGO!PC-CABLE

MPI extension cable

PC/TTY

 

 

Here, more pictures of our compatible cables of Siemens parts

 

Of course, we also supply some other brands compatible PLC Programming cables, such as Mitsubishi/OMRON/Panasonic/GE/Fuji/Schneider/Allen-Bradley/Delta/Proface…

ES-ETH-SC09-NEW

FX-USB-AW

USB-SC09

USB-SC09-FX

SC-09+

SC-10

USB-QC30R2

FX2N-485-BD+

FX2N-485-BD

FX2N-422-BD

FX2N-232-BD

FX1N-485-BD

FX1N-422-BD

FX3U-485-BD

FX3U-422-BD

FX3U-232-BD

FX3U-USB-BD

1747-PIC

1747-UIC

1747-CP3

USB-1747-CP3 

1761-CBL-PM02

USB-1761-CBL-PM02

 

Pictures for your reference:

 

Please feel free to contact me for any question!

Contact person: Miss Nancy

 

Siemens 6ES7365-0BA01-0AA0 Interface module

Intorduction to Siemens 6ES7365-0BA01-0AA0

SIMATIC S7-300,INTERFACE MODULE IM 365 FOR CONNECTING AN EXPANSION RACK, W/O K-BUS, 2 MODULES + CONNECTING CABLE 1M

 

Data sheet of Siemens 6ES7365-0BA01-0AA0

Input current
from backplane bus 5 V DC, max.	100 mA
Power losses
Power loss, typ.	0.5 W
Hardware configuration
Number of interfaces per CPU, max.	1; 1 pair
Dimensions
Width	40 mm
Height	125 mm
Depth	120 mm
Weight
Weight, approx.	580 g

 

Our company (Kollewin Technology CO., Limited) have a new product,

named 6ES7365-0BA01-0AA0,

it is 100% compatible with Siemens original part.

Part#: 6ES7365-0BA01-0AA0

Unit price on request, please contact me  Nancy
Description: S7 Interface module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China

 

More compatible Siemens S7-200/300 modules we can offer：

Model	Product Description
SM7-200 DIGITAL MODULE
6ES7221-1BH22-0XA0	EM221 16 DI 24V DC
6ES7221-1BL22-0XA0	EM221 32 DI 24V DC
6ES7222-1BF22-0XA0	EM222 8DO,DC 24V
6ES7222-1HF22-0XA0	EM222 8DO,relay
6ES7222-1BH22-0XA0	EM222 16 DO 24V DC
6ES7222-1HH22-0XA0	EM222 16 DO RELAY
6ES7222-1BL22-0XA0	EM222 32 DO 24V DC
6ES7223-1HF22-0XA0	EM223 4DI/4DO,DC 24V relay
6ES7223-1BH22-0XA0	EM223 8 DI/ 8 DO 24V DC
6ES7223-1PH22-0XA0	EM223 8 DI 24V DC/8 DO RELAY
6ES7223-1BL22-0XA0	EM223 16 DI/ 16 DO 24V DC
6ES7223-1PL22-0XA0	EM223 16 DI 24V DC/ 16 DO RELAY
6ES7223-1BF22-0XA0	4 DI/4DO，24 VDC
6ES7221-1BF22-0XA0	8 DI,24V DC
SM7-200 ANALOG MODULE
6ES7231-0HC22-0XA0	EM231 4 AI x 12 Bits
6ES7231-0HF22-0XA0	EM231 8 AI x 12/11 BIT
6ES7231-7PC22-0XA0	EM231 4 RTD
6ES7231-7PD22-0XA0	EM231 4 TC
6ES7231-7PH22-0XA0	EM231 8 TC
6ES7231-7PL22-0XA0	16AI, T/C INPUT MOD, 16BIT
6ES7231-7PB22-0XA0	2AI, RTD INPUT MOD. 16BIT
6ES7232-0HB22-0XA0	EM232 2 AO x 12 Bits
6ES7232-0HD22-0XA0	EM232 4 AO x 12 Bits
6ES7235-0KD22-0XA0	EM235 4 AI/ 1 AO x 12 Bits
SM7-300 DIGITAL MODULE
6ES7321-1BH02-0AA0	SM321 16 DI 24 VDC
6ES7321-1FH00-0AA0	SM321 16 DI  AC 230V
6ES7321-1BL00-0AA0	SM321 32 DI 24 VDC
6ES7322-1BF01-0AA0	SM322,8DO,24VDC,2A
6ES7322-1BH01-0AA0	SM322 16 DO 24 VDC/ 0.5A
6ES7322-1HH01-0AA0	SM322 16 DO RELAY
6ES7322-1BL00-0AA0	SM322 32 DO 24V DC/0.5A
6ES7323-1BL00-0AA0	SM323 16DI 24V DC/ 16DO 24V DC 0.5A
SM7-300 ANALOG MODULE
6ES7331-1KF01-0AB0	SM331 8 AI x 13 Bits
6ES7331-7KF02-0AB0	SM331 8 AI X 14 Bits
6ES7331-7PF01-0AB0	SM331 8 AI，RTD
6ES7331-7PF11-0AB0	SM331 8 AI，TC
6ES7332-5HD01-0AB0	SM332 4 AO x 12 Bits
6ES7332-5HF00-0AB0	SM 332 8 AO x 12 BITS
SIMATIC DP  IM 153
6ES7153-1AA03-0XB0	SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES
6ES7365-0BA01-0AA0	IM 365 Rack expansion module,be deployed with a central controller and a expansion rack

 

More pictures for your reference:

 

Please feel free to contact me for any question!

Contact person: Miss Nancy

 

Siemens 6ES7153-1AA03-0XB0 Interface module

Introduction to Siemens 6ES7153-1AA03-0XB0

SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES

 

Data sheet of Siemens 6ES7153-1AA03-0XB0

General information
Vendor identification (VendorID)	801Dh
Supply voltage
24 V DC	Yes
permissible range, lower limit (DC)	20.4 V
permissible range, upper limit (DC)	28.8 V
permissible range (ripple included), lower limit (DC)	20.4 V
permissible range (ripple included), upper limit (DC)	28.8 V
External protection for supply cables (recommendation)	not necessary
Mains buffering
Mains/voltage failure stored energy time	5 ms
Input current
Current consumption, max.	350 mA; at 24 V DC
Rated value at 24 V DC	625 mA
Inrush current, typ.	2.5 A
I²t	0.1 A²·s
Output voltage
Rated value, 5 V DC	Yes
Output current
for backplane bus (5 V DC), max.	1 A
Power losses
Power loss, typ.	3 W
Address area
Addressing volume
Inputs	128 byte
Outputs	128 byte
Hardware configuration
Number of modules per DP slave interface, max.	8
Interfaces
Interface physics, RS 485	Yes
Interface physics, FOC	No
PROFIBUS DP
Node addresses	1 to 125 permitted
Automatic detection of transmission speed	Yes
PROFIBUS DP, output current, max.	90 mA
Transmission rate, max.	12 Mbit/s
Transmission procedure	RS 485
SYNC capability	Yes
FREECE capability	Yes
Direct data exchange (slave-to-slave communication)	Yes; Sender
PROFIBUS DP	9-pin sub D socket
1st interface
DP slave
GSD file	(for DPV1) SIEM801D.GSD; SI01801D.GSG
Automatic baud rate search	Yes
Communication functions
Bus protocol/transmission protocol	PROFIBUS DP to EN 50170
Isolation
Isolation checked with	Isolation voltage 500 V
Degree and class of protection
IP20	Yes
Ambient conditions
Operating temperature
Min.	0 °C
max.	60 °C
Air pressure
Operating altitude above sea level, max.	3000 m
Dimensions
Width	40 mm
Height	125 mm
Depth	117 mm
Weights
Weight, approx.	360 g

 

Our company (Kollewin Technology CO., Limited) have a new product,

named 153-1AA03-0XB0,

it is 100% compatible with Siemens original part.

Part#: 153-1AA03-0XB0

Unit price:USD168.00/pc 
Description: S7 interface module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China

Technical data sheet of our 153-1AA03-0XB0

Model	IM 153 PROFIBUS-DP
Product  Description	·Profibus-DP interface module to connect remote I/O modules with Profibus protocol ·Eight  300 expasion modules can be used each IM 153-1
Modules characteristic
Protocol	PROFIBUS-DP

 

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Siemens 6ES7321-1FH00-0AA0 DIGITAL MODULE

  ↵

  ↵

  ↵Introduction to 6ES7321-1FH00-0AA0

Supply voltage
Load voltage L1
Rated value (AC)	230 V; 120/230 V AC; all load voltages must have the same phase.
Input current
from backplane bus 5 V DC, max.	29 mA
Power losses
Power loss, typ.	4.9 W
Digital inputs
Number of digital inputs	16
Input characteristic curve in accordance with IEC 61131, type 1	Yes
Number of simultaneously controllable inputs
horizontal installation
up to 40 °C, max.	16
up to 60 °C, max.	16
vertical installation
up to 40 °C, max.	16
Input voltage
Rated value, AC	230 V; 120/230 V AC
for signal "0"	0 to 40 V
for signal "1"	79 to 264 V
Frequency range	47 to 63 Hz
Input current
for signal "1", typ.	6.5 mA; (120V, 60Hz), 16mA (230V, 50Hz)
Input delay (for rated value of input voltage)
for standard inputs
Parameterizable	No
at "0" to "1", min.	25 ms
at "0" to "1", max.	25 ms
Cable length
Cable length, shielded, max.	1000 m
Cable length unshielded, max.	600 m
Encoder
Connectable encoders
2-wire sensor	Yes
Permissible quiescent current (2-wire sensor), max.	2 mA
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No
Interrupts/diagnostics/status information
Alarms
Alarms	No
Diagnostic alarm	No
Hardware interrupt	No
Diagnostic messages
Diagnostic functions	No
Diagnostics indication LED
Group error SF (red)	No
Status indicator digital input (green)	Yes
Galvanic isolation
Galvanic isolation digital inputs
between the channels	No
between the channels, in groups of	4
between the channels and the backplane bus	Yes; Optocoupler
Isolation
Isolation checked with	4000 VDC
Connection method
required front connector	20-pin
Dimensions
Width	40 mm
Height	125 mm
Depth	120 mm
Weights
Weight, approx.	240 g

 

System User's Manual PDF of S7-300 digital & analog modules:

S7-300 Modules data & USER'S MANUAL

Siemens 6ES7332-5HF00-0AB0 ANALOG MODULE

  ↵

  ↵

  ↵Introduction to 6ES7332-5HF00-0AA0

Supply voltage
Load voltage L+
Rated value (DC)	24 V
Input current
from load voltage L+ (without load), max.	340 mA
from backplane bus 5 V DC, max.	100 mA
Power losses
Power loss, typ.	6 W
Analog outputs
Number of analog outputs	8
Voltage output, short-circuit protection	Yes
Voltage output, short-circuit current, max.	25 mA
Current output, no-load voltage, max.	18 V
Output ranges, voltage
0 to 10 V	Yes
1 to 5 V	Yes
-10 to +10 V	Yes
Output ranges, current
0 to 20 mA	Yes
-20 to +20 mA	Yes
4 to 20 mA	Yes
Load impedance (in rated range of output)
with voltage outputs, min.	1 kΩ
with voltage outputs, capacitive load, max.	1 µF
with current outputs, max.	500 Ω
with current outputs, inductive load, max.	10 mH
Cable length
Cable length, shielded, max.	200 m
Analog value creation
Integrations and conversion time/ resolution per channel
Resolution with overrange (bit including sign), max.	12 bit; +/-10 V, +/-20 mA, 4 to 20 mA, 1 to 5 V: 11 bits + sign; 0 to 10 V, 0 to 20 mA: 12 bits
Conversion time (per channel)	0.8 ms
Settling time
for resistive load	0.2 ms
for capacitive load	3.3 ms
for inductive load	0.5 ms; 0.5 ms (1 mH); 3.3 ms (10 mH)
Errors/accuracies
Operational limit in overall temperature range
Voltage, relative to output area	+/- 0,5 %
Current, relative to output area	+/- 0,6 %
Basic error limit (operational limit at 25 °C)
Voltage, relative to output area	+/- 0,4 %
Current, relative to output area	+/- 0,5 %
Interrupts/diagnostics/status information
Substitute values connectable	Yes; Parameterizable
Alarms
Diagnostic alarm	Yes; Parameterizable
Diagnostic messages
Diagnostic information readable	Yes
Diagnostics	Yes
Diagnostics indication LED
Group error SF (red)	Yes
Galvanic isolation
Galvanic isolation analog outputs
between the channels and the backplane bus	Yes
Isolation
Isolation checked with	500 V DC
Connection method
required front connector	40-pin
Dimensions
Width	40 mm
Height	125 mm
Depth	120 mm
Weights
Weight, approx.	272 g

 

System User's Manual PDF of S7-300 digital & analog modules:

S7-300 Modules data & USER'S MANUAL

Siemens 6ES7331-7PF11-0AB0 ANALOG MODULE

  ↵

  ↵

  ↵Introduction to 6ES7331-7PF11-0AB0

Supply voltage
Load voltage L+
Rated value (DC)	24 V
Reverse polarity protection	Yes
Input current
from load voltage L+ (without load), max.	200 mA
from backplane bus 5 V DC, max.	100 mA
Power losses
Power loss, typ.	3 W
Analog inputs
Number of analog inputs	8
permissible input voltage for voltage input (destruction limit), max.	75 V; 20 V DC permanent, 75 V DC for max. 1 s (duty factor 1:20)
Input ranges
Voltage	No
Current	No
Thermocouple	Yes
Resistance thermometer	No
Resistance	No
Input ranges (rated values), voltages
0 to +10 V	No
1 to 5 V	No
1 to 10 V	No
-1 V to +1 V	No
-10 V to +10 V	No
-2.5 V to +2.5 V	No
-250 mV to +250 mV	No
-5 V to +5 V	No
-50 mV to +50 mV	No
-500 mV to +500 mV	No
-80 mV to +80 mV	No
Input ranges (rated values), currents
0 to 20 mA	No
-10 to +10 mA	No
-20 to +20 mA	No
-3.2 to +3.2 mA	No
4 to 20 mA	No
Input ranges (rated values), thermoelements
Type B	Yes
Type E	Yes
Type J	Yes
Type K	Yes
Type L	Yes
Type N	Yes
Type R	Yes
Type S	Yes
Type T	Yes
Type U	Yes
Type TXK/TXK(L) to GOST	Yes
Input ranges (rated values), resistance thermometers
Cu 10	No
Ni 100	No
Ni 1000	No
LG-Ni 1000	No
Ni 120	No
Ni 200	No
Ni 500	No
Pt 100	No
Pt 1000	No
Pt 200	No
Pt 500	No
Input ranges (rated values), resistors
0 to 150 ohms	No
0 to 300 ohms	No
0 to 600 ohms	No
0 to 6000 ohms	No
Thermocouple (TC)
for thermocouples	Type B, E, J, K, L, N, R, S. T, U, C
Temperature compensation
Parameterizable	Yes
internal temperature compensation	Yes
external temperature compensation with compensations socket	Yes
external temperature compensation with Pt100	Yes
Characteristic linearization
Parameterizable	Yes
Cable length
Cable length, shielded, max.	100 m
Analog value creation
Measurement principle	integrating
Integrations and conversion time/ resolution per channel
Resolution with overrange (bit including sign), max.	16 bit; Two's complement
Integration time, parameterizable	Yes
Basic conversion time, ms	Up to 4 channels: 10 ms per module, 5 channels upwards: 190 ms per module
Interference voltage suppression for interference frequency f1 in Hz	400 / 60 / 50 Hz
Errors/accuracies
Operational limit in overall temperature range
Voltage, relative to input area	+/- 1 K
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No
Interrupts/diagnostics/status information
Alarms
Diagnostic alarm	Yes; Parameterizable per group
Limit value alarm	Yes; Parameterizable
Diagnostic messages
Diagnostic functions	Yes; Parameterizable
Diagnostic information readable	Yes
Diagnostics	Yes
Diagnostics indication LED
Group error SF (red)	Yes
Galvanic isolation
Galvanic isolation analog inputs
between the channels	No
between the channels, in groups of	2
between the channels and the backplane bus	Yes
Isolation
Isolation checked with	500 V DC
Connection method
required front connector	40-pin
Dimensions
Width	40 mm
Height	125 mm
Depth	120 mm
Weights
Weight, approx.	272 g

 

System User's Manual PDF of S7-300 digital & analog modules:

S7-300 Modules data & USER'S MANUAL