Sep 21 2013

Siemens 6ES7321-1FH00-0AA0 DIGITAL MODULE

↵

↵Introduction to 6ES7321-1FH00-0AA0

SIMATIC S7-300, DIGITAL INPUT SM 321, OPTICALLY ISOLATED 16 DI, 120/230V AC, 1 X 20 PIN

Data sheet of Siemens 6ES7321-1FH00-0AA0

Supply voltage
Load voltage L1
Rated value (AC)	230 V; 120/230 V AC; all load voltages must have the same phase.
Input current
from backplane bus 5 V DC, max.	29 mA
Power losses
Power loss, typ.	4.9 W
Digital inputs
Number of digital inputs	16
Input characteristic curve in accordance with IEC 61131, type 1	Yes
Number of simultaneously controllable inputs
horizontal installation
up to 40 °C, max.	16
up to 60 °C, max.	16
vertical installation
up to 40 °C, max.	16
Input voltage
Rated value, AC	230 V; 120/230 V AC
for signal "0"	0 to 40 V
for signal "1"	79 to 264 V
Frequency range	47 to 63 Hz
Input current
for signal "1", typ.	6.5 mA; (120V, 60Hz), 16mA (230V, 50Hz)
Input delay (for rated value of input voltage)
for standard inputs
Parameterizable	No
at "0" to "1", min.	25 ms
at "0" to "1", max.	25 ms
Cable length
Cable length, shielded, max.	1000 m
Cable length unshielded, max.	600 m
Encoder
Connectable encoders
2-wire sensor	Yes
Permissible quiescent current (2-wire sensor), max.	2 mA
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No
Interrupts/diagnostics/status information
Alarms
Alarms	No
Diagnostic alarm	No
Hardware interrupt	No
Diagnostic messages
Diagnostic functions	No
Diagnostics indication LED
Group error SF (red)	No
Status indicator digital input (green)	Yes
Galvanic isolation
Galvanic isolation digital inputs
between the channels	No
between the channels, in groups of	4
between the channels and the backplane bus	Yes; Optocoupler
Isolation
Isolation checked with	4000 VDC
Connection method
required front connector	20-pin
Dimensions
Width	40 mm
Height	125 mm
Depth	120 mm
Weights
Weight, approx.	240 g

System User's Manual PDF of S7-300 digital & analog modules:

S7-300 Modules data & USER'S MANUAL

Our company (Kollewin Technology CO., Limited) have a new product,

named 321-1FH00-0AA0,

it is 100% compatible with Siemens original part.

Part#: 321-1FH00-0AA0

Unit price on request, please contact me Nancy
Description: S7-300 Digital module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China

Here, you also need 1 piece of 20pin front connector to connect with it.

Our compatible 6ES7 392-1AJ00-0AA0 can meet your requirements.

6ES7 392-1AJ00-0AA0 @USD10.50/pc

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

More compatible Siemens S7-200/300 modules we can offer：

Model	Product Description
SM7-200 DIGITAL MODULE
6ES7221-1BH22-0XA0	EM221 16 DI 24V DC
6ES7221-1BL22-0XA0	EM221 32 DI 24V DC
6ES7222-1BF22-0XA0	EM222 8DO,DC 24V
6ES7222-1HF22-0XA0	EM222 8DO,relay
6ES7222-1BH22-0XA0	EM222 16 DO 24V DC
6ES7222-1HH22-0XA0	EM222 16 DO RELAY
6ES7222-1BL22-0XA0	EM222 32 DO 24V DC
6ES7223-1HF22-0XA0	EM223 4DI/4DO,DC 24V relay
6ES7223-1BH22-0XA0	EM223 8 DI/ 8 DO 24V DC
6ES7223-1PH22-0XA0	EM223 8 DI 24V DC/8 DO RELAY
6ES7223-1BL22-0XA0	EM223 16 DI/ 16 DO 24V DC
6ES7223-1PL22-0XA0	EM223 16 DI 24V DC/ 16 DO RELAY
6ES7223-1BF22-0XA0	4 DI/4DO，24 VDC
6ES7221-1BF22-0XA0	8 DI,24V DC
SM7-200 ANALOG MODULE
6ES7231-0HC22-0XA0	EM231 4 AI x 12 Bits
6ES7231-0HF22-0XA0	EM231 8 AI x 12/11 BIT
6ES7231-7PC22-0XA0	EM231 4 RTD
6ES7231-7PD22-0XA0	EM231 4 TC
6ES7231-7PH22-0XA0	EM231 8 TC
6ES7231-7PL22-0XA0	16AI, T/C INPUT MOD, 16BIT
6ES7231-7PB22-0XA0	2AI, RTD INPUT MOD. 16BIT
6ES7232-0HB22-0XA0	EM232 2 AO x 12 Bits
6ES7232-0HD22-0XA0	EM232 4 AO x 12 Bits
6ES7235-0KD22-0XA0	EM235 4 AI/ 1 AO x 12 Bits
SM7-300 DIGITAL MODULE
6ES7321-1BH02-0AA0	SM321 16 DI 24 VDC
6ES7321-1FH00-0AA0	SM321 16 DI AC 230V
6ES7321-1BL00-0AA0	SM321 32 DI 24 VDC
6ES7322-1BF01-0AA0	SM322,8DO,24VDC,2A
6ES7322-1BH01-0AA0	SM322 16 DO 24 VDC/ 0.5A
6ES7322-1HH01-0AA0	SM322 16 DO RELAY
6ES7322-1BL00-0AA0	SM322 32 DO 24V DC/0.5A
6ES7323-1BL00-0AA0	SM323 16DI 24V DC/ 16DO 24V DC 0.5A
SM7-300 ANALOG MODULE
6ES7331-1KF01-0AB0	SM331 8 AI x 13 Bits
6ES7331-7KF02-0AB0	SM331 8 AI X 14 Bits
6ES7331-7PF01-0AB0	SM331 8 AI，RTD
6ES7331-7PF11-0AB0	SM331 8 AI，TC
6ES7332-5HD01-0AB0	SM332 4 AO x 12 Bits
6ES7332-5HF00-0AB0	SM 332 8 AO x 12 BITS
SIMATIC DP IM 153
6ES7153-1AA03-0XB0	SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES
6ES7365-0BA01-0AA0	IM 365 Rack expansion module,be deployed with a central controller and a expansion rack

More pictures for your reference:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

Permalink | Categories SIEMENS S7-300 on September 21, 2013 by nancy | No Comments
Tags: 6ES7321-1FH00-0AA0, Digital module, S7-300, Siemens

Sep 20 2013

Siemens 6ES7332-5HF00-0AB0 ANALOG MODULE

↵

↵Introduction to 6ES7332-5HF00-0AA0

SIMATIC S7-300, ANALOG OUTPUT SM 332, OPTICALLY ISOLATED, 8 AO, U/I; DIAGNOSTICS; RESOLUTION 11/12 BITS, 40 PIN, REMOVE/INSERT W. ACTIVE, BACKPLANE BUS

Data sheet of Siemens 6ES7332-5HF00-0AA0

Supply voltage
Load voltage L+
Rated value (DC)	24 V
Input current
from load voltage L+ (without load), max.	340 mA
from backplane bus 5 V DC, max.	100 mA
Power losses
Power loss, typ.	6 W
Analog outputs
Number of analog outputs	8
Voltage output, short-circuit protection	Yes
Voltage output, short-circuit current, max.	25 mA
Current output, no-load voltage, max.	18 V
Output ranges, voltage
0 to 10 V	Yes
1 to 5 V	Yes
-10 to +10 V	Yes
Output ranges, current
0 to 20 mA	Yes
-20 to +20 mA	Yes
4 to 20 mA	Yes
Load impedance (in rated range of output)
with voltage outputs, min.	1 kΩ
with voltage outputs, capacitive load, max.	1 µF
with current outputs, max.	500 Ω
with current outputs, inductive load, max.	10 mH
Cable length
Cable length, shielded, max.	200 m
Analog value creation
Integrations and conversion time/ resolution per channel
Resolution with overrange (bit including sign), max.	12 bit; +/-10 V, +/-20 mA, 4 to 20 mA, 1 to 5 V: 11 bits + sign; 0 to 10 V, 0 to 20 mA: 12 bits
Conversion time (per channel)	0.8 ms
Settling time
for resistive load	0.2 ms
for capacitive load	3.3 ms
for inductive load	0.5 ms; 0.5 ms (1 mH); 3.3 ms (10 mH)
Errors/accuracies
Operational limit in overall temperature range
Voltage, relative to output area	+/- 0,5 %
Current, relative to output area	+/- 0,6 %
Basic error limit (operational limit at 25 °C)
Voltage, relative to output area	+/- 0,4 %
Current, relative to output area	+/- 0,5 %
Interrupts/diagnostics/status information
Substitute values connectable	Yes; Parameterizable
Alarms
Diagnostic alarm	Yes; Parameterizable
Diagnostic messages
Diagnostic information readable	Yes
Diagnostics	Yes
Diagnostics indication LED
Group error SF (red)	Yes
Galvanic isolation
Galvanic isolation analog outputs
between the channels and the backplane bus	Yes
Isolation
Isolation checked with	500 V DC
Connection method
required front connector	40-pin
Dimensions
Width	40 mm
Height	125 mm
Depth	120 mm
Weights
Weight, approx.	272 g

System User's Manual PDF of S7-300 digital & analog modules:

S7-300 Modules data & USER'S MANUAL

Our company (Kollewin Technology CO., Limited) have a new product,

named 332-5HF00-0AA0,

it is 100% compatible with Siemens original part.

Part#: 332-5HF00-0AA0

Unit price:USD554.60/pc
Description: S7-300 Analog module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China

Here, you also need 1 piece of 40 pin front connector to connect with it..

Our compatible 6ES7 392-1AM00-0AA0 can meet your requirements.

6ES7 392-1AM00-0AA0 @USD16.90/pc

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Discriptions of our compatible OEM 332-5HF00-0AA0

Model	SM332 8AO
Product Description	8AO; Resolution:12bits; High-accuracy
Power consumption
·From bus current consumption	100mA
·From L+	70mA
·Power loss	6W
Number of analog outputs	8
Load voltage+rated value	24V
Shielded cable length,Max	200m
Voltage output, Max,short circuit Current	Yes
Voltage output, Short circuit current(Max)	25mA
Voltage output, Open-circuit current,Max	18V
Load impedance
·Voltage outputs,Min	1KΩ
·current outputs,Max	500Ω
Output ranges
·voltage	±10V,0~10V,1~5V
·current	±20mA,0~20mA,4~20mA
D/A resolution	12bit
conversion time(per channel)	Max:0.8ms
Setting time
·Resistive loads	0.1ms
·Capacitive loads	3.3ms
·Inductive loads	0.5ms
Output cross talk	>40dB
Tolerance(Over entire temperature range)
·Voltage output	±0.5%
·Current output	±0.6%
Diagnostic interrupt	None
Group fault error	Red LED
Isolution tested for contact
·Between channels and backplane bus	Yes
·Between channels and load voltage L+	Yes
Front connector	40-pin
Dimensions(W x H x D)(mm)	40×125×120
Order Number	332-5HF00-0AB0

More compatible Siemens S7-200/300 modules we can offer：

Model	Product Description
SM7-200 DIGITAL MODULE
6ES7221-1BH22-0XA0	EM221 16 DI 24V DC
6ES7221-1BL22-0XA0	EM221 32 DI 24V DC
6ES7222-1BF22-0XA0	EM222 8DO,DC 24V
6ES7222-1HF22-0XA0	EM222 8DO,relay
6ES7222-1BH22-0XA0	EM222 16 DO 24V DC
6ES7222-1HH22-0XA0	EM222 16 DO RELAY
6ES7222-1BL22-0XA0	EM222 32 DO 24V DC
6ES7223-1HF22-0XA0	EM223 4DI/4DO,DC 24V relay
6ES7223-1BH22-0XA0	EM223 8 DI/ 8 DO 24V DC
6ES7223-1PH22-0XA0	EM223 8 DI 24V DC/8 DO RELAY
6ES7223-1BL22-0XA0	EM223 16 DI/ 16 DO 24V DC
6ES7223-1PL22-0XA0	EM223 16 DI 24V DC/ 16 DO RELAY
6ES7223-1BF22-0XA0	4 DI/4DO，24 VDC
6ES7221-1BF22-0XA0	8 DI,24V DC
SM7-200 ANALOG MODULE
6ES7231-0HC22-0XA0	EM231 4 AI x 12 Bits
6ES7231-0HF22-0XA0	EM231 8 AI x 12/11 BIT
6ES7231-7PC22-0XA0	EM231 4 RTD
6ES7231-7PD22-0XA0	EM231 4 TC
6ES7231-7PH22-0XA0	EM231 8 TC
6ES7231-7PL22-0XA0	16AI, T/C INPUT MOD, 16BIT
6ES7231-7PB22-0XA0	2AI, RTD INPUT MOD. 16BIT
6ES7232-0HB22-0XA0	EM232 2 AO x 12 Bits
6ES7232-0HD22-0XA0	EM232 4 AO x 12 Bits
6ES7235-0KD22-0XA0	EM235 4 AI/ 1 AO x 12 Bits
SM7-300 DIGITAL MODULE
6ES7321-1BH02-0AA0	SM321 16 DI 24 VDC
6ES7321-1FH00-0AA0	SM321 16 DI AC 230V
6ES7321-1BL00-0AA0	SM321 32 DI 24 VDC
6ES7322-1BF01-0AA0	SM322,8DO,24VDC,2A
6ES7322-1BH01-0AA0	SM322 16 DO 24 VDC/ 0.5A
6ES7322-1HH01-0AA0	SM322 16 DO RELAY
6ES7322-1BL00-0AA0	SM322 32 DO 24V DC/0.5A
6ES7323-1BL00-0AA0	SM323 16DI 24V DC/ 16DO 24V DC 0.5A
SM7-300 ANALOG MODULE
6ES7331-1KF01-0AB0	SM331 8 AI x 13 Bits
6ES7331-7KF02-0AB0	SM331 8 AI X 14 Bits
6ES7331-7PF01-0AB0	SM331 8 AI，RTD
6ES7331-7PF11-0AB0	SM331 8 AI，TC
6ES7332-5HD01-0AB0	SM332 4 AO x 12 Bits
6ES7332-5HF00-0AB0	SM 332 8 AO x 12 BITS
SIMATIC DP IM 153
6ES7153-1AA03-0XB0	SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES
6ES7365-0BA01-0AA0	IM 365 Rack expansion module,be deployed with a central controller and a expansion rack

More pictures for your reference:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

Permalink | Categories SIEMENS S7-300 on September 20, 2013 by nancy | No Comments
Tags: 6ES7332-5HF00-0AB0, Analog module, S7-300, Siemens

Sep 19 2013

Siemens 6ES7331-7PF11-0AB0 ANALOG MODULE

↵

↵Introduction to 6ES7331-7PF11-0AB0

SIMATIC S7-300, ANALOG INPUT SM 331, OPTICALLY ISOLATATED, 8 AI THERMOCOUPLE, TYPE B, E, J, K, L, N, R, S, T TXK/TXK(L) ACCORDING GOST 16 BIT, 50 MS, 1 X 40 PIN

Data sheet of Siemens 6ES7331-7PF11-0AB0

Supply voltage
Load voltage L+
Rated value (DC)	24 V
Reverse polarity protection	Yes
Input current
from load voltage L+ (without load), max.	200 mA
from backplane bus 5 V DC, max.	100 mA
Power losses
Power loss, typ.	3 W
Analog inputs
Number of analog inputs	8
permissible input voltage for voltage input (destruction limit), max.	75 V; 20 V DC permanent, 75 V DC for max. 1 s (duty factor 1:20)
Input ranges
Voltage	No
Current	No
Thermocouple	Yes
Resistance thermometer	No
Resistance	No
Input ranges (rated values), voltages
0 to +10 V	No
1 to 5 V	No
1 to 10 V	No
-1 V to +1 V	No
-10 V to +10 V	No
-2.5 V to +2.5 V	No
-250 mV to +250 mV	No
-5 V to +5 V	No
-50 mV to +50 mV	No
-500 mV to +500 mV	No
-80 mV to +80 mV	No
Input ranges (rated values), currents
0 to 20 mA	No
-10 to +10 mA	No
-20 to +20 mA	No
-3.2 to +3.2 mA	No
4 to 20 mA	No
Input ranges (rated values), thermoelements
Type B	Yes
Type E	Yes
Type J	Yes
Type K	Yes
Type L	Yes
Type N	Yes
Type R	Yes
Type S	Yes
Type T	Yes
Type U	Yes
Type TXK/TXK(L) to GOST	Yes
Input ranges (rated values), resistance thermometers
Cu 10	No
Ni 100	No
Ni 1000	No
LG-Ni 1000	No
Ni 120	No
Ni 200	No
Ni 500	No
Pt 100	No
Pt 1000	No
Pt 200	No
Pt 500	No
Input ranges (rated values), resistors
0 to 150 ohms	No
0 to 300 ohms	No
0 to 600 ohms	No
0 to 6000 ohms	No
Thermocouple (TC)
for thermocouples	Type B, E, J, K, L, N, R, S. T, U, C
Temperature compensation
Parameterizable	Yes
internal temperature compensation	Yes
external temperature compensation with compensations socket	Yes
external temperature compensation with Pt100	Yes
Characteristic linearization
Parameterizable	Yes
Cable length
Cable length, shielded, max.	100 m
Analog value creation
Measurement principle	integrating
Integrations and conversion time/ resolution per channel
Resolution with overrange (bit including sign), max.	16 bit; Two's complement
Integration time, parameterizable	Yes
Basic conversion time, ms	Up to 4 channels: 10 ms per module, 5 channels upwards: 190 ms per module
Interference voltage suppression for interference frequency f1 in Hz	400 / 60 / 50 Hz
Errors/accuracies
Operational limit in overall temperature range
Voltage, relative to input area	+/- 1 K
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No
Interrupts/diagnostics/status information
Alarms
Diagnostic alarm	Yes; Parameterizable per group
Limit value alarm	Yes; Parameterizable
Diagnostic messages
Diagnostic functions	Yes; Parameterizable
Diagnostic information readable	Yes
Diagnostics	Yes
Diagnostics indication LED
Group error SF (red)	Yes
Galvanic isolation
Galvanic isolation analog inputs
between the channels	No
between the channels, in groups of	2
between the channels and the backplane bus	Yes
Isolation
Isolation checked with	500 V DC
Connection method
required front connector	40-pin
Dimensions
Width	40 mm
Height	125 mm
Depth	120 mm
Weights
Weight, approx.	272 g

System User's Manual PDF of S7-300 digital & analog modules:

S7-300 Modules data & USER'S MANUAL

Our company (Kollewin Technology CO., Limited) have a new product,

named 331-7PF11-0AB0,

it is 100% compatible with Siemens original part.

Part#: 331-7PF11-0AB0

Unit price on request, please contact me: Nancy

Description: S7-300 ANALOG module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China

Here, you also need 1 piece of 40 pin front connector to connect with it..

Our compatible 6ES7 392-1AM00-0AA0 can meet your requirements.

6ES7 392-1AM00-0AA0 @USD16.90/pc

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

More compatible Siemens S7-200/300 modules we can offer：

Model	Product Description
SM7-200 DIGITAL MODULE
6ES7221-1BH22-0XA0	EM221 16 DI 24V DC
6ES7221-1BL22-0XA0	EM221 32 DI 24V DC
6ES7222-1BF22-0XA0	EM222 8DO,DC 24V
6ES7222-1HF22-0XA0	EM222 8DO,relay
6ES7222-1BH22-0XA0	EM222 16 DO 24V DC
6ES7222-1HH22-0XA0	EM222 16 DO RELAY
6ES7222-1BL22-0XA0	EM222 32 DO 24V DC
6ES7223-1HF22-0XA0	EM223 4DI/4DO,DC 24V relay
6ES7223-1BH22-0XA0	EM223 8 DI/ 8 DO 24V DC
6ES7223-1PH22-0XA0	EM223 8 DI 24V DC/8 DO RELAY
6ES7223-1BL22-0XA0	EM223 16 DI/ 16 DO 24V DC
6ES7223-1PL22-0XA0	EM223 16 DI 24V DC/ 16 DO RELAY
6ES7223-1BF22-0XA0	4 DI/4DO，24 VDC
6ES7221-1BF22-0XA0	8 DI,24V DC
SM7-200 ANALOG MODULE
6ES7231-0HC22-0XA0	EM231 4 AI x 12 Bits
6ES7231-0HF22-0XA0	EM231 8 AI x 12/11 BIT
6ES7231-7PC22-0XA0	EM231 4 RTD
6ES7231-7PD22-0XA0	EM231 4 TC
6ES7231-7PH22-0XA0	EM231 8 TC
6ES7231-7PL22-0XA0	16AI, T/C INPUT MOD, 16BIT
6ES7231-7PB22-0XA0	2AI, RTD INPUT MOD. 16BIT
6ES7232-0HB22-0XA0	EM232 2 AO x 12 Bits
6ES7232-0HD22-0XA0	EM232 4 AO x 12 Bits
6ES7235-0KD22-0XA0	EM235 4 AI/ 1 AO x 12 Bits
SM7-300 DIGITAL MODULE
6ES7321-1BH02-0AA0	SM321 16 DI 24 VDC
6ES7321-1FH00-0AA0	SM321 16 DI AC 230V
6ES7321-1BL00-0AA0	SM321 32 DI 24 VDC
6ES7322-1BF01-0AA0	SM322,8DO,24VDC,2A
6ES7322-1BH01-0AA0	SM322 16 DO 24 VDC/ 0.5A
6ES7322-1HH01-0AA0	SM322 16 DO RELAY
6ES7322-1BL00-0AA0	SM322 32 DO 24V DC/0.5A
6ES7323-1BL00-0AA0	SM323 16DI 24V DC/ 16DO 24V DC 0.5A
SM7-300 ANALOG MODULE
6ES7331-1KF01-0AB0	SM331 8 AI x 13 Bits
6ES7331-7KF02-0AB0	SM331 8 AI X 14 Bits
6ES7331-7PF01-0AB0	SM331 8 AI，RTD
6ES7331-7PF11-0AB0	SM331 8 AI，TC
6ES7332-5HD01-0AB0	SM332 4 AO x 12 Bits
6ES7332-5HF00-0AB0	SM 332 8 AO x 12 BITS
SIMATIC DP IM 153
6ES7153-1AA03-0XB0	SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES
6ES7365-0BA01-0AA0	IM 365 Rack expansion module,be deployed with a central controller and a expansion rack

More pictures for your reference:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

Permalink | Categories SIEMENS S7-300 on September 19, 2013 by nancy | No Comments
Tags: 6ES7331-7PF11-0AB0, Analog module, S7-300, Siemens

Sep 18 2013

Siemens 6ES7331-7PF01-0AB0 ANANLOG MODULE

↵

↵Introduction to 6ES7331-7PF01-0AA0

SIMATIC S7-300, ANALOG INPUT SM 331, OPT. ISOL.,2/3/4 WIRE, 8AI, RESISTANCE, PT100/200/1000 NI100/120/200/500/1000, CU10, PLUS CHARACTERISTICS ACCORDING TO GOST STANDARD 16 (INTERN 24) BIT, 50MS, 1 X 40 PIN

Data sheet of Siemens 6ES7331-7PF01-0AA0

Supply voltage
Load voltage L+
Rated value (DC)	24 V
Reverse polarity protection	Yes
Input current
from load voltage L+ (without load), max.	240 mA
from backplane bus 5 V DC, max.	100 mA
Power losses
Power loss, typ.	4.6 W
Analog inputs
Number of analog inputs	8
Number of analog inputs for resistance measurement	8
permissible input voltage for voltage input (destruction limit), max.	75 V; 35 V continuous, 75 V for max. 1 s (mark to space ratio 1:20)
Input ranges
Voltage	No
Current	No
Thermocouple	No
Resistance thermometer	Yes
Resistance	Yes
Input ranges (rated values), voltages
0 to +10 V	No
1 to 5 V	No
1 to 10 V	No
-1 V to +1 V	No
-10 V to +10 V	No
-2.5 V to +2.5 V	No
-250 mV to +250 mV	No
-5 V to +5 V	No
-50 mV to +50 mV	No
-500 mV to +500 mV	No
-80 mV to +80 mV	No
Input ranges (rated values), currents
0 to 20 mA	No
-10 to +10 mA	No
-20 to +20 mA	No
-3.2 to +3.2 mA	No
4 to 20 mA	No
Input ranges (rated values), thermoelements
Type B	No
Type E	No
Type J	No
Type K	No
Type L	No
Type N	No
Type R	No
Type S	No
Type T	No
Type U	No
Type TXK/TXK(L) to GOST	No
Input ranges (rated values), resistance thermometers
Cu 10	Yes
Ni 100	Yes
Ni 1000	Yes
LG-Ni 1000	Yes
Ni 120	Yes
Ni 200	Yes
Ni 500	Yes
Pt 100	Yes
Pt 1000	Yes
Pt 200	Yes
Pt 500	Yes
Input ranges (rated values), resistors
0 to 150 ohms	Yes
0 to 300 ohms	Yes
0 to 600 ohms	Yes
Resistance thermometer (RTD)
Characteristic linearization
for resistance thermometer	Pt100, Pt200, Pt500, Pt1000, Ni100, Ni120, Ni200, Ni500, Ni1000, Cu10; (standard/climate)
Characteristic linearization
Parameterizable	Yes
Cable length
Cable length, shielded, max.	200 m
Analog value creation
Measurement principle	integrating
Integrations and conversion time/ resolution per channel
Resolution with overrange (bit including sign), max.	16 bit; Two's complement
Integration time, parameterizable	Yes
Basic conversion time, ms	up to 4 channels: 10 ms per module, over 5 channels: 190 ms per module, 8 channels: 80 ms
Interference voltage suppression for interference frequency f1 in Hz	400 / 60 / 50 Hz
Encoder
Connection of signal encoders
for resistance measurement with 2-conductor connection	Yes; without resistance correction
for resistance measurement with 3-conductor connection	Yes
for resistance measurement with 4-conductor connection	Yes
Errors/accuracies
Operational limit in overall temperature range
Impedance, relative to input area	+/- 0,1 %
Resistance-type thermometer, relative to input area	+/- 1 K
Basic error limit (operational limit at 25 °C)
Impedance, relative to input area	+/- 0,05 %
Resistance-type thermometer, relative to input area	+/- 0.5 K
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No
Interrupts/diagnostics/status information
Alarms
Diagnostic alarm	Yes; Parameterizable per group
Limit value alarm	Yes; Parameterizable
Diagnostic messages
Diagnostic functions	Yes; Parameterizable
Diagnostic information readable	Yes
Diagnostics	Yes
Diagnostics indication LED
Group error SF (red)	Yes
Galvanic isolation
Galvanic isolation analog inputs
between the channels	No
between the channels, in groups of	2
between the channels and the backplane bus	Yes
Isolation
Isolation checked with	500 V DC
Connection method
required front connector	40-pin
Dimensions
Width	40 mm
Height	125 mm
Depth	120 mm
Weights
Weight, approx.	272 g

System User's Manual PDF of S7-300 digital & analog modules:

S7-300 Modules data & USER'S MANUAL

Our company (Kollewin Technology CO., Limited) have a new product,

named 331-7PF01-0AA0,

it is 100% compatible with Siemens original part.

Part#: 331-7PF01-0AA0

Unit price:USD440.00/pc
Description: S7-300 Analog module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China

Here, you also need 1 piece of 40 pin front connector to connect with it..

Our compatible 6ES7 392-1AM00-0AA0 can meet your requirements.

6ES7 392-1AM00-0AA0 @USD16.90/pc

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Discriptions of our compatible OEM 331-7PF01-0AA0

Model	SM331 8AI RTD
Product Description	8AI; RTD temperature measurement modules; stable
Power consumption
·Rate value	24V DC
·From backplane bus current consumption	50mA
·From L+	40mA
·Power loss	1W
The power of transmitter
·Supply current	/
·short-circuit protection	/
Number of analog inputs	8
Cable Length (Shielded)	Max:200m
Input type and input range
·voltage	/
·current(4wire)	/
·current(2wire)	/
·tesistance	150Ω, 300Ω, 600Ω,
·thermocouple	/
·RTD	Pt10、 Pt50、Pt100, Pt200、 Pt500、 Pt1000、 Ni100、 Ni120 、Ni200,Ni500 、 Ni1000 、Cu10(9.035) 、 Cu50、Cu100
A/D resolution	16bits
Basic conversion time(per channel)	190ms
Interference frequency suppression	400/50/60Hz
Tolerance(Over entire temperature range)
·Voltage	/
·Current	/
·resistance	±0.1%
·temperature	±1℃
Interrupts
Diagnostic interrupt	Per group Yes,Configurable
Limit-value interrupt	Yes,Configurable
Isolation tested for contact
·Between channels	Yes
·Between channels and backplane bu	Yes
Front connector	40-pin
Dimensions(W x H x D)(mm)	40×125×120
Order Number	331-7PF01-0AB0

More compatible Siemens S7-200/300 modules we can offer：

Model	Product Description
SM7-200 DIGITAL MODULE
6ES7221-1BH22-0XA0	EM221 16 DI 24V DC
6ES7221-1BL22-0XA0	EM221 32 DI 24V DC
6ES7222-1BF22-0XA0	EM222 8DO,DC 24V
6ES7222-1HF22-0XA0	EM222 8DO,relay
6ES7222-1BH22-0XA0	EM222 16 DO 24V DC
6ES7222-1HH22-0XA0	EM222 16 DO RELAY
6ES7222-1BL22-0XA0	EM222 32 DO 24V DC
6ES7223-1HF22-0XA0	EM223 4DI/4DO,DC 24V relay
6ES7223-1BH22-0XA0	EM223 8 DI/ 8 DO 24V DC
6ES7223-1PH22-0XA0	EM223 8 DI 24V DC/8 DO RELAY
6ES7223-1BL22-0XA0	EM223 16 DI/ 16 DO 24V DC
6ES7223-1PL22-0XA0	EM223 16 DI 24V DC/ 16 DO RELAY
6ES7223-1BF22-0XA0	4 DI/4DO，24 VDC
6ES7221-1BF22-0XA0	8 DI,24V DC
SM7-200 ANALOG MODULE
6ES7231-0HC22-0XA0	EM231 4 AI x 12 Bits
6ES7231-0HF22-0XA0	EM231 8 AI x 12/11 BIT
6ES7231-7PC22-0XA0	EM231 4 RTD
6ES7231-7PD22-0XA0	EM231 4 TC
6ES7231-7PH22-0XA0	EM231 8 TC
6ES7231-7PL22-0XA0	16AI, T/C INPUT MOD, 16BIT
6ES7231-7PB22-0XA0	2AI, RTD INPUT MOD. 16BIT
6ES7232-0HB22-0XA0	EM232 2 AO x 12 Bits
6ES7232-0HD22-0XA0	EM232 4 AO x 12 Bits
6ES7235-0KD22-0XA0	EM235 4 AI/ 1 AO x 12 Bits
SM7-300 DIGITAL MODULE
6ES7321-1BH02-0AA0	SM321 16 DI 24 VDC
6ES7321-1FH00-0AA0	SM321 16 DI AC 230V
6ES7321-1BL00-0AA0	SM321 32 DI 24 VDC
6ES7322-1BF01-0AA0	SM322,8DO,24VDC,2A
6ES7322-1BH01-0AA0	SM322 16 DO 24 VDC/ 0.5A
6ES7322-1HH01-0AA0	SM322 16 DO RELAY
6ES7322-1BL00-0AA0	SM322 32 DO 24V DC/0.5A
6ES7323-1BL00-0AA0	SM323 16DI 24V DC/ 16DO 24V DC 0.5A
SM7-300 ANALOG MODULE
6ES7331-1KF01-0AB0	SM331 8 AI x 13 Bits
6ES7331-7KF02-0AB0	SM331 8 AI X 14 Bits
6ES7331-7PF01-0AB0	SM331 8 AI，RTD
6ES7331-7PF11-0AB0	SM331 8 AI，TC
6ES7332-5HD01-0AB0	SM332 4 AO x 12 Bits
6ES7332-5HF00-0AB0	SM 332 8 AO x 12 BITS
SIMATIC DP IM 153
6ES7153-1AA03-0XB0	SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES
6ES7365-0BA01-0AA0	IM 365 Rack expansion module,be deployed with a central controller and a expansion rack

More pictures for your reference:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

Permalink | Categories SIEMENS S7-300 on September 18, 2013 by nancy | No Comments
Tags: 6ES7331-7PF01-0AB0, Digital module, S7-300, Siemens

Sep 17 2013

Siemens 6ES7322-1HH01-0AA0 DIGITAL MODULE

↵

↵Introduction to 6ES7322-1HH01-0AA0

SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED 16DO, RELAY CONTACTS, 1 X 20 PIN

Data sheet of Siemens 6ES7322-1HH01-0AA0

Supply voltage
Load voltage L+
Rated value (DC)	120 V
Load voltage L1
Rated value (AC)	230 V
Input current
from backplane bus 5 V DC, max.	100 mA
Power losses
Power loss, typ.	4.5 W
Digital outputs
Number of digital outputs	16
Switching capacity of the outputs
Lamp load, max.	50 W; 230 V AC
Output current
for signal "1" rated value	2 A
for signal "1" minimum load current	10 mA
Switching frequency
with resistive load, max.	1 Hz
with inductive load, max.	0.5 Hz
on lamp load, max.	1 Hz
mechanical, max.	10 Hz
Aggregate current of outputs (per group)
horizontal installation
up to 60 °C, max.	8 A
vertical installation
up to 40 °C, max.	8 A
Relay outputs
Rated input voltage of relay coil L+ (DC)	24 V
Number of operating cycles, max.	100000; 50000 (24 V DC, at 2 A); 700000 (120 V AC, at 2 A); 100000 (230 V AC, at 2 A)
Switching capacity of contacts
with inductive load, max.	2 A; 2 A (230 V AC), 2 A (24 V DC)
with resistive load, max.	2 A; 2 A (230 V AC), 2 A (24 V DC)
Cable length
Cable length, shielded, max.	1000 m
Cable length unshielded, max.	600 m
Interrupts/diagnostics/status information
Alarms
Diagnostic alarm	No
Diagnostic messages
Diagnostics	No
Wire break	No
Short circuit	No
Fuse blown	No
Missing load voltage	No
Diagnostics indication LED
Rated load voltage PWR (green)	No
Fuse OK FSG (green)	No
Galvanic isolation
Galvanic isolation digital outputs
between the channels, in groups of	8
between the channels and the backplane bus	Yes; Optocoupler
Isolation
Isolation checked with	1500 V AC
Connection method
required front connector	20-pin
Dimensions
Width	40 mm
Height	125 mm
Depth	120 mm
Weights
Weight, approx.	250 g

System User's Manual PDF of S7-300 digital & analog modules:

S7-300 Modules data & USER'S MANUAL

Our company (Kollewin Technology CO., Limited) have a new product,

named 322-1HH01-0AA0,

it is 100% compatible with Siemens original part.

Part#: 322-1HH01-0AA0

Unit price:USD197.00/pc
Description: S7-300 Digital module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China

Here, you also need 1 piece of 20pin front connector to connect with it.

Our compatible 6ES7 392-1AJ00-0AA0 can meet your requirements.

6ES7 392-1AJ00-0AA0 @USD10.50/pc

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Discriptions of our compatible OEM 322-1HH01-0AA0

Model	SM322 Number of digital outputs:16
Product Description	16DO,24V DC;Relay; Optical isolation with high immunity
Power consumption
·From bus current consumption	100mA
·Power loss	4.5W
Number of digital outputs	16, Relay
Cable Length (Shielded)	1,000m
Cable Length (unshielded)	600m
Short-circuit protection	/
Inductive cutoff voltage	/
Lamp load Max	200W
Output voltage:”1” signal	/
Output current:”1” signal	2A
Lifetime contact mechanical	1,000,000
Lifetime contact mechanical rated load voltage)	100,000
Sum of output currents(per group)	8A
IIsolation tested for contact
·To backplane bus	Yes,Optocoupler
·To per group between channels	Yes
Switching frequency for contacts
·Resistive loads,Max	1Hz
·Capacitive loads,Max	0.5Hz
·Lamp loads,Max	1Hz
·Mechanical load,Max	10Hz
The status indicates	Green LED each channel
Front connector	20-pin
Dimensions(W x H x D)(mm)	40×125×120
Order Number	322-1HH01-0AA0

More compatible Siemens S7-200/300 modules we can offer：

Model	Product Description
SM7-200 DIGITAL MODULE
6ES7221-1BH22-0XA0	EM221 16 DI 24V DC
6ES7221-1BL22-0XA0	EM221 32 DI 24V DC
6ES7222-1BF22-0XA0	EM222 8DO,DC 24V
6ES7222-1HF22-0XA0	EM222 8DO,relay
6ES7222-1BH22-0XA0	EM222 16 DO 24V DC
6ES7222-1HH22-0XA0	EM222 16 DO RELAY
6ES7222-1BL22-0XA0	EM222 32 DO 24V DC
6ES7223-1HF22-0XA0	EM223 4DI/4DO,DC 24V relay
6ES7223-1BH22-0XA0	EM223 8 DI/ 8 DO 24V DC
6ES7223-1PH22-0XA0	EM223 8 DI 24V DC/8 DO RELAY
6ES7223-1BL22-0XA0	EM223 16 DI/ 16 DO 24V DC
6ES7223-1PL22-0XA0	EM223 16 DI 24V DC/ 16 DO RELAY
6ES7223-1BF22-0XA0	4 DI/4DO，24 VDC
6ES7221-1BF22-0XA0	8 DI,24V DC
SM7-200 ANALOG MODULE
6ES7231-0HC22-0XA0	EM231 4 AI x 12 Bits
6ES7231-0HF22-0XA0	EM231 8 AI x 12/11 BIT
6ES7231-7PC22-0XA0	EM231 4 RTD
6ES7231-7PD22-0XA0	EM231 4 TC
6ES7231-7PH22-0XA0	EM231 8 TC
6ES7231-7PL22-0XA0	16AI, T/C INPUT MOD, 16BIT
6ES7231-7PB22-0XA0	2AI, RTD INPUT MOD. 16BIT
6ES7232-0HB22-0XA0	EM232 2 AO x 12 Bits
6ES7232-0HD22-0XA0	EM232 4 AO x 12 Bits
6ES7235-0KD22-0XA0	EM235 4 AI/ 1 AO x 12 Bits
SM7-300 DIGITAL MODULE
6ES7321-1BH02-0AA0	SM321 16 DI 24 VDC
6ES7321-1FH00-0AA0	SM321 16 DI AC 230V
6ES7321-1BL00-0AA0	SM321 32 DI 24 VDC
6ES7322-1BF01-0AA0	SM322,8DO,24VDC,2A
6ES7322-1BH01-0AA0	SM322 16 DO 24 VDC/ 0.5A
6ES7322-1HH01-0AA0	SM322 16 DO RELAY
6ES7322-1BL00-0AA0	SM322 32 DO 24V DC/0.5A
6ES7323-1BL00-0AA0	SM323 16DI 24V DC/ 16DO 24V DC 0.5A
SM7-300 ANALOG MODULE
6ES7331-1KF01-0AB0	SM331 8 AI x 13 Bits
6ES7331-7KF02-0AB0	SM331 8 AI X 14 Bits
6ES7331-7PF01-0AB0	SM331 8 AI，RTD
6ES7331-7PF11-0AB0	SM331 8 AI，TC
6ES7332-5HD01-0AB0	SM332 4 AO x 12 Bits
6ES7332-5HF00-0AB0	SM 332 8 AO x 12 BITS
SIMATIC DP IM 153
6ES7153-1AA03-0XB0	SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES
6ES7365-0BA01-0AA0	IM 365 Rack expansion module,be deployed with a central controller and a expansion rack

More pictures for your reference:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

Permalink | Categories SIEMENS S7-300 on September 17, 2013 by nancy | No Comments
Tags: 6ES7322-1HH01-0AA0, Digital module, S7-300, Siemens

Sep 16 2013

Siemens 6ES7322-1BH01-0AA0 DIGITAL MODULE

↵

↵Introduction to 6ES7322-1BH01-0AA0

SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED, 16 DO, 24V DC, 0.5A, 1 X 20 PIN SUM OF OUTPUT CURRENTS 4A/GROUP (8A/MODULE)

Data sheet of Siemens 6ES7322-1BH01-0AA0

Supply voltage
Load voltage L+
Rated value (DC)	24 V
permissible range, lower limit (DC)	20.4 V
permissible range, upper limit (DC)	28.8 V
Input current
from load voltage L+ (without load), max.	80 mA
from backplane bus 5 V DC, max.	80 mA
Power losses
Power loss, typ.	4.9 W
Digital outputs
Number of digital outputs	16
Limitation of inductive shutdown voltage to	L+ (-53 V)
Switching capacity of the outputs
Lamp load, max.	5 W
Load resistance range
lower limit	48 Ω
upper limit	4 kΩ
Output voltage
for signal "1", min.	L+ (-0.8 V)
Output current
for signal "1" rated value	0.5 A
for signal "1" permissible range for 0 to 40 °C, max.	0.6 A
for signal "1" minimum load current	5 mA
for signal "0" residual current, max.	0.5 mA
Switching frequency
with resistive load, max.	100 Hz
with inductive load, max.	0.5 Hz
on lamp load, max.	10 Hz
Aggregate current of outputs (per group)
horizontal installation
up to 40 °C, max.	4 A
up to 60 °C, max.	3 A
vertical installation
up to 40 °C, max.	2 A
Cable length
Cable length, shielded, max.	1000 m
Cable length unshielded, max.	600 m
Interrupts/diagnostics/status information
Alarms
Diagnostic alarm	No
Diagnostic messages
Diagnostics	No
Wire break	No
Short circuit	No
Fuse blown	No
Missing load voltage	No
Diagnostics indication LED
Rated load voltage PWR (green)	No
Fuse OK FSG (green)	No
Galvanic isolation
Galvanic isolation digital outputs
between the channels, in groups of	8
between the channels and the backplane bus	Yes; Optocoupler
Isolation
Isolation checked with	500 V DC
Connection method
required front connector	20-pin
Dimensions
Width	40 mm
Height	125 mm
Depth	120 mm
Weights
Weight, approx.	190 g

System User's Manual PDF of S7-300 digital & analog modules:

S7-300 Modules data & USER'S MANUAL

Our company (Kollewin Technology CO., Limited) have a new product,

named 322-1BH01-0AA0,

it is 100% compatible with Siemens original part.

Part#: 322-1BH01-0AA0

Unit price:USD132.00/pc
Description: S7-300 Digital module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China

Here, you also need 1 piece of 20pin front connector to connect with it.

Our compatible 6ES7 392-1AJ00-0AA0 can meet your requirements.

6ES7 392-1AJ00-0AA0 @USD10.50/pc

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Discriptions of our compatible OEM 322-1BH01-0AA0

Technical specifications
Power consumption
·From backplane bus	80mA
·Power loss	4.9W

Number of digital contact	16
Cable length: shielded	1,000m
Cable length: unshielded	600m
Short-circuit protection	Yes,Electronic
Inductive cutoff voltage	L+(-53V)

Lamp load Max.	5W
Output voltage “1”signal	Min. L + (-0.8V)
Output current “1”signal	0.5A
Sum of output currents(per group)	4A


Service life of contacts
·Mechanical
·At rated load voltage
Isolation tested for contact
·To backplane bus	Optocoupler
·Per group between channels Switching Frequency of contacts	Yes
·Resistive loads,Max	100Hz
·Capacitive loads,Max	0.5Hz
·Lamp loads,Max	10Hz
·Mechanical load,Max
The status indicates	Green LED each channel
Frontconnestor	20-Pin

Dimensions(W x H x D)(mm)	40×125×120
weight	210g
Wiring Diagram

More compatible Siemens S7-200/300 modules we can offer：

Model	Product Description
SM7-200 DIGITAL MODULE
6ES7221-1BH22-0XA0	EM221 16 DI 24V DC
6ES7221-1BL22-0XA0	EM221 32 DI 24V DC
6ES7222-1BF22-0XA0	EM222 8DO,DC 24V
6ES7222-1HF22-0XA0	EM222 8DO,relay
6ES7222-1BH22-0XA0	EM222 16 DO 24V DC
6ES7222-1HH22-0XA0	EM222 16 DO RELAY
6ES7222-1BL22-0XA0	EM222 32 DO 24V DC
6ES7223-1HF22-0XA0	EM223 4DI/4DO,DC 24V relay
6ES7223-1BH22-0XA0	EM223 8 DI/ 8 DO 24V DC
6ES7223-1PH22-0XA0	EM223 8 DI 24V DC/8 DO RELAY
6ES7223-1BL22-0XA0	EM223 16 DI/ 16 DO 24V DC
6ES7223-1PL22-0XA0	EM223 16 DI 24V DC/ 16 DO RELAY
6ES7223-1BF22-0XA0	4 DI/4DO，24 VDC
6ES7221-1BF22-0XA0	8 DI,24V DC
SM7-200 ANALOG MODULE
6ES7231-0HC22-0XA0	EM231 4 AI x 12 Bits
6ES7231-0HF22-0XA0	EM231 8 AI x 12/11 BIT
6ES7231-7PC22-0XA0	EM231 4 RTD
6ES7231-7PD22-0XA0	EM231 4 TC
6ES7231-7PH22-0XA0	EM231 8 TC
6ES7231-7PL22-0XA0	16AI, T/C INPUT MOD, 16BIT
6ES7231-7PB22-0XA0	2AI, RTD INPUT MOD. 16BIT
6ES7232-0HB22-0XA0	EM232 2 AO x 12 Bits
6ES7232-0HD22-0XA0	EM232 4 AO x 12 Bits
6ES7235-0KD22-0XA0	EM235 4 AI/ 1 AO x 12 Bits
SM7-300 DIGITAL MODULE
6ES7321-1BH02-0AA0	SM321 16 DI 24 VDC
6ES7321-1FH00-0AA0	SM321 16 DI AC 230V
6ES7321-1BL00-0AA0	SM321 32 DI 24 VDC
6ES7322-1BF01-0AA0	SM322,8DO,24VDC,2A
6ES7322-1BH01-0AA0	SM322 16 DO 24 VDC/ 0.5A
6ES7322-1HH01-0AA0	SM322 16 DO RELAY
6ES7322-1BL00-0AA0	SM322 32 DO 24V DC/0.5A
6ES7323-1BL00-0AA0	SM323 16DI 24V DC/ 16DO 24V DC 0.5A
SM7-300 ANALOG MODULE
6ES7331-1KF01-0AB0	SM331 8 AI x 13 Bits
6ES7331-7KF02-0AB0	SM331 8 AI X 14 Bits
6ES7331-7PF01-0AB0	SM331 8 AI，RTD
6ES7331-7PF11-0AB0	SM331 8 AI，TC
6ES7332-5HD01-0AB0	SM332 4 AO x 12 Bits
6ES7332-5HF00-0AB0	SM 332 8 AO x 12 BITS
SIMATIC DP IM 153
6ES7153-1AA03-0XB0	SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES
6ES7365-0BA01-0AA0	IM 365 Rack expansion module,be deployed with a central controller and a expansion rack

More pictures for your reference:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

Permalink | Categories SIEMENS S7-300 on September 16, 2013 by nancy | No Comments
Tags: 6ES7322-1BH01-0AA0, Digital module, S7-300, Siemens

Sep 15 2013

Siemens 6ES7322-1BF01-0AA0 DIGITAL MODULE

↵

↵Introduction to 6ES7322-1BF01-0AA0

SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED, 8 DO, 24V DC, 2A, 1 X 20 PIN

Data sheet of Siemens 6ES7322-1BF01-0AA0

Supply voltage
Load voltage L+
Rated value (DC)	24 V
permissible range, lower limit (DC)	20.4 V
permissible range, upper limit (DC)	28.8 V
Input current
from load voltage L+ (without load), max.	60 mA
from backplane bus 5 V DC, max.	40 mA
Power losses
Power loss, typ.	6.8 W
Digital outputs
Number of digital outputs	8
Limitation of inductive shutdown voltage to	L+ (-48 V)
Switching capacity of the outputs
Lamp load, max.	10 W
Load resistance range
lower limit	12 Ω
upper limit	4 kΩ
Output voltage
for signal "1", min.	L+ (-0.8 V)
Output current
for signal "1" rated value	2 A
for signal "1" permissible range for 0 to 40 °C, max.	2.4 A
for signal "1" minimum load current	5 mA
for signal "0" residual current, max.	0.5 mA
Switching frequency
with resistive load, max.	100 Hz
with inductive load, max.	0.5 Hz
on lamp load, max.	10 Hz
Aggregate current of outputs (per group)
horizontal installation
up to 40 °C, max.	4 A
up to 60 °C, max.	4 A
vertical installation
up to 40 °C, max.	4 A
Cable length
Cable length, shielded, max.	1000 m
Cable length unshielded, max.	600 m
Interrupts/diagnostics/status information
Alarms
Diagnostic alarm	No
Diagnostic messages
Diagnostics	No
Wire break	No
Short circuit	No
Fuse blown	No
Missing load voltage	No
Diagnostics indication LED
Rated load voltage PWR (green)	No
Fuse OK FSG (green)	No
Galvanic isolation
Galvanic isolation digital outputs
between the channels, in groups of	4
between the channels and the backplane bus	Yes; Optocoupler
Isolation
Isolation checked with	500 V DC
Connection method
required front connector	20-pin
Dimensions
Width	40 mm
Height	125 mm
Depth	120 mm
Weights
Weight, approx.	190 g

System User's Manual PDF of S7-300 digital & analog modules:

S7-300 Modules data & USER'S MANUAL

Our company (Kollewin Technology CO., Limited) have a new product,

named 322-1BF01-0AA0,

it is 100% compatible with Siemens original part.

Part#: 322-1BF01-0AA0

Unit price:USD114.00/pc
Description: S7-200 Analog module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China

Here, you also need 1 piece of 20pin front connector to connect with it.

Our compatible 6ES7 392-1AJ00-0AA0 can meet your requirements.

6ES7 392-1AJ00-0AA0 @USD10.50/pc

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Discriptions of our compatible OEM 322-1BF01-0AA0

Model	SM322 Number of digital outputs:8
Product Description	8DO,24V DC;Transistor; Optical isolation with high immunity
Power consumption
·From bus current consumption	50mA
·Power loss	6.8W
Number of digital outputs	8
Cable Length (Shielded)	1,000m
Cable Length (unshielded)	600m
Short-circuit protection	Yes,Electronic
Inductive cutoff voltage	L+(-48V)
Lamp load Max	10W
Output voltage:”1” signal	Min,L+(-0.8V)
Output current:”1” signal	2A
Lifetime contact mechanical	/
Lifetime contact mechanical rated load voltage)	/
Sum of output currents(per group)	4A
IIsolation tested for contact
·To backplane bus	Yes,Optocoupler
·To per group between channels	Yes
Switching frequency for contacts
·Resistive loads,Max	100Hz
·Capacitive loads,Max	0.5Hz
·Lamp loads,Max	10Hz
·Mechanical load,Max	/
The status indicates	Green LED each channel
Front connector	20-pin
Dimensions(W x H x D)(mm)	40×125×120
Order Number	322-1BF01-0AA0

More compatible Siemens S7-200/300 modules we can offer：

Model	Product Description
SM7-200 DIGITAL MODULE
6ES7221-1BH22-0XA0	EM221 16 DI 24V DC
6ES7221-1BL22-0XA0	EM221 32 DI 24V DC
6ES7222-1BF22-0XA0	EM222 8DO,DC 24V
6ES7222-1HF22-0XA0	EM222 8DO,relay
6ES7222-1BH22-0XA0	EM222 16 DO 24V DC
6ES7222-1HH22-0XA0	EM222 16 DO RELAY
6ES7222-1BL22-0XA0	EM222 32 DO 24V DC
6ES7223-1HF22-0XA0	EM223 4DI/4DO,DC 24V relay
6ES7223-1BH22-0XA0	EM223 8 DI/ 8 DO 24V DC
6ES7223-1PH22-0XA0	EM223 8 DI 24V DC/8 DO RELAY
6ES7223-1BL22-0XA0	EM223 16 DI/ 16 DO 24V DC
6ES7223-1PL22-0XA0	EM223 16 DI 24V DC/ 16 DO RELAY
6ES7223-1BF22-0XA0	4 DI/4DO，24 VDC
6ES7221-1BF22-0XA0	8 DI,24V DC
SM7-200 ANALOG MODULE
6ES7231-0HC22-0XA0	EM231 4 AI x 12 Bits
6ES7231-0HF22-0XA0	EM231 8 AI x 12/11 BIT
6ES7231-7PC22-0XA0	EM231 4 RTD
6ES7231-7PD22-0XA0	EM231 4 TC
6ES7231-7PH22-0XA0	EM231 8 TC
6ES7231-7PL22-0XA0	16AI, T/C INPUT MOD, 16BIT
6ES7231-7PB22-0XA0	2AI, RTD INPUT MOD. 16BIT
6ES7232-0HB22-0XA0	EM232 2 AO x 12 Bits
6ES7232-0HD22-0XA0	EM232 4 AO x 12 Bits
6ES7235-0KD22-0XA0	EM235 4 AI/ 1 AO x 12 Bits
SM7-300 DIGITAL MODULE
6ES7321-1BH02-0AA0	SM321 16 DI 24 VDC
6ES7321-1FH00-0AA0	SM321 16 DI AC 230V
6ES7321-1BL00-0AA0	SM321 32 DI 24 VDC
6ES7322-1BF01-0AA0	SM322,8DO,24VDC,2A
6ES7322-1BH01-0AA0	SM322 16 DO 24 VDC/ 0.5A
6ES7322-1HH01-0AA0	SM322 16 DO RELAY
6ES7322-1BL00-0AA0	SM322 32 DO 24V DC/0.5A
6ES7323-1BL00-0AA0	SM323 16DI 24V DC/ 16DO 24V DC 0.5A
SM7-300 ANALOG MODULE
6ES7331-1KF01-0AB0	SM331 8 AI x 13 Bits
6ES7331-7KF02-0AB0	SM331 8 AI X 14 Bits
6ES7331-7PF01-0AB0	SM331 8 AI，RTD
6ES7331-7PF11-0AB0	SM331 8 AI，TC
6ES7332-5HD01-0AB0	SM332 4 AO x 12 Bits
6ES7332-5HF00-0AB0	SM 332 8 AO x 12 BITS
SIMATIC DP IM 153
6ES7153-1AA03-0XB0	SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES
6ES7365-0BA01-0AA0	IM 365 Rack expansion module,be deployed with a central controller and a expansion rack

More pictures for your reference:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

Permalink | Categories SIEMENS S7-300 on September 15, 2013 by nancy | No Comments
Tags: 6ES7322-1BF01-0AA0, Digital module, S7-300, Siemens

Aug 19 2013

CP5512 Express Card for Siemens 6GK1551-2AA00

Introduction to 6GK1551-2AA00

COMMUNICATION PROCESSOR CP 5512 PC CARD (CARDBUS, 32 BITS) FOR CONNECTION OF A PG OR NOTEBOOK TO PROFIBUS OR MPI

Data sheet of 6GK1551-2AA00

Product-type designation	CP 5512
	COMMUNICATION PROCESSOR CP 5512 PC CARD (CARDBUS, 32 BITS) FOR CONNECTION OF A PG OR NOTEBOOK TO PROFIBUS OR MPI
Transmission rate
Transmission rate
at interface 1 / in accordance with PROFIBUS
minimum	9.6 kbit/s
maximum	12 Mbit/s
Interfaces
Number of electrical connections / at interface 1 / in accordance with PROFIBUS	1
Design of electrical connection / at interface 1 / in accordance with PROFIBUS	9-pin Sub-D socket (RS 485)
Supply voltage, current consumption, power loss
Type of voltage	DC
Supply voltage
1 / from backplane bus	3.3 V
Relative symmetrical tolerance
at 3.3 V / with DC	5 %
Consumed current
1 / from backplane bus / with DC / maximum	0.52 A
Resistive loss	1.8 W
Permitted ambient conditions
Ambient temperature
during operating	5…45 °C
during storage	-20…+60 °C
during transport	-20…+60 °C
Relative humidity
at 25 °C / without condensation / during operating / maximum	95 %
Protection class IP	IP00
Design, dimensions and weight
Width	86 mm
Height	5 mm
Depth	54 mm
Net weight	130 g
Product properties, functions, components / general
Number of plug-in cards in the same design / can be plugged in / per PC station	1
Number of modules / note	-
Number of possible connections / for open communication / by means of SEND/RECEIVE / maximum	50
Software / for DP master function / required	Yes, SOFTNET-PB DP
Service / as DP master
DPV0	Yes
DPV1	No
DPV2	No
Number of DP slaves / on DP master / usable	64
Amount of data
of the address area of the inputs / as DP master / overall	7808 byte
of the address area of the outputs / as DP master / overall	7808 byte
of the address area of the inputs / per DP slave	244 byte
of the address area of the outputs / per DP slave	244 byte
of the address area of the diagnostic data / per DP slave	244 byte
Service / as DP slave
DPV0	Yes
DPV1	No
Amount of data
of the address area of the inputs / as DP slave / overall	122 byte
of the address area of the outputs / as DP slave / overall	122 byte
Number of possible connections / for S7/PG communication / maximum	8
Number of configurable connections / per PC station	207
Configuration software / required	NCM PC is included in scope of delivery of the required software product
Product function / Port diagnostics	Yes
Standards, specifications, approvals
Standard
for EMC	2004/108/EC
for safety / of CSA and UL	CAN/CSA C22.2 & UL 60950-1
for emitted interference	EN 61000-6-3, EN 61000-6-4
for interference immunity	EN 61000-6-1, EN 61000-6-2
Verification of suitability
CE mark	Yes
C-Tick	Yes

More details of CP5512E, please find in below PDF file:

Communication card CP5512 Siemens S7-200-300-400 6GK1551-2AA00

Our company (Kollewin Technology CO., Limited) have a new product,

named CP5512E.

It is 100% compatible with Siemens original part.

Part#: CP5512E

EX-Work Price: $475.00/pc

User's manual PDF of CP5512Express card 6GK1551-2AA00:

CP5512 Express 6GK1551-2AA00

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Introduction to our CP5512 Express card:

Nowadays the laptops have eliminated the PCMCIA slot,but adopt the ExpressCard slot.So we especially develop the CP5512 EXPRESS for ExpressCard laptop.

ExpressCard CP5512,it’s suitable for Laptop Expresscard slot,is used to achieve PROFIBUS/MPI/PPI/FWLcommunication between PC and SIMATIC Net. Communication speed is 9.6Kbps–12Mbps.It can be also used for desktop computer after the conversion card.

Not inlcude the MPI extension cable,for MPI cable,please click this link to get: MPI Cable

The function of our CP5512 EXPRESS is the totally same as Siemens original CP5512 except they use on different laptop interfaces.It’s the isolated PROFIBUS/MPI/PPI/FWL communication card specially for laptop, use iCoupler Magnetic Coupling isolators to replace the optocoupler,with small dimension, wide temperature range,and have anti-lightning and surging protective circuit and resumption of Overcurrent protection circuit on the RS485 interface, all use industrial IC in order to apply to wider temperature range, is used to achieve PROFIBUS/MPI/PPI/FWL communication connection between laptop and SIMATIC.

CP5512 EXPRESS also can be used on PCI-E slot of desktop computer after the PCI-E to ExpressCard converter, the function is same as Siemens CP5611,CP5621.

CP5512 EXPRESS support hot plug and plug and play. Perfect isolation circuit and interface protective circuit make you at ease to use it.

Communication service:

PROFIBUS-DP master station class 1 and 2
PROFIBUS-DP slave and SOFTNET-DP slave
MPI/PPI/FWL communication
S7 communication with SOFTNET-S7
S5-compatible communication (SEND/RECEIVE based on the FDL interface) with SOFTNET-D or SOFTNET-S7

CP5512 EXPRESS is suitable for the following version or above version softwares:
STEP7 V5.2
SOFTNET-S7 V6.1
SOFTNET-DP, SOFTNET-DP slave from V6.1
STEP 7-Micro/WIN from V3.2 SP4
ProTool^®, ProTool/Pro^® V6.0 SP2
NCM PC from V5.2
SIMATIC PDM V5.2 SP1

Technical Specification:

Transmission rate: 9.6Kbps～12Mbps,the corresponding largest communication distance accord with PROFIBUS standard.
Interface:connect PROFIBUS/MPI/PPI,isolated 9 pin Sub-D connector.

Isolated voltage:1000VDC

Interface protection:have anti-lightning and surging protection(Ipp=100A 10/700us,4KV) on the RS485 interface.ITU-TK20/21,VDE 0433 standard. ±15KV ESD protection. Overcurrent protection with restoration function：RS485 port can withstand up to 60V voltage caused by continuous over-current.

Standard working voltage:3.3 VDC
power：1.0W
working temperature：-20～+75℃
size：adapter:length* width * height(mm)：123×68×30,cable length: 25CM
weight：150g

Support hardware of CP5512 EXPRESS:

It’s different from PC Adapter and PC Adapter USB, CP5512 EXPRESS supports much more hardwares,such as Siemens S7-200/300/400PLC, PPI/MPI/PROFIBUS interface of touch panel, EM277,ET200 and other hardwares with PROFIBUS/MPI/PPI/FWL interface.

It need PROFIBUS cable or MPI cable(Siemens part nr 6ES7 901-0BF00-0AA0) when CP5512 EXPRESS communicates with fieldbus devices.

Signal definition of CP5512 EXPRESS profibus Interface(DB9F):

Pin No.	Signal name	Description	Input / Output
1	NC	Unused	-
2	NC	Unused	-
3	B（RXD+/TXD+）	RS485 Signal+	Input/Output
4	RTS_AS	Handshake signal	Input
5	Ground（0V）	Signal Ground	-
6	+5V	5V power 50mA.max.	output
7	NC	Unused	-
8	A（RXD-/TXD-）	RS485 Signal-	Input/Output
9	RTS_PG	Request	Output
Shell	PE	Shield	-

More compatible PLC Programming cables of Siemens

CP5611

CP5611-A2

CP5512

CP5512EXP-NEW

PC Adapter CN-NEW

ES-ETH-PPI-NEW

ETH Adapter CN-NEW

USB/PPIM+

PC/PPI

PC/PPI+

USB/MPI+ V4.0

USB/MPI+ V2.0

PC/MPI+ including RS232 cable

PC/MPI

LOGO!USB-CABLE

LOGO!PC-CABLE

MPI extension cable

PC/TTY

More pictures of our compatible cables of Siemens parts :

Other compatible PLC Programming cables, such as Mitsubishi/OMRON/Panasonic/GE/Fuji/Schneider/Allen-Bradley/Delta/Proface…

ES-ETH-SC09-NEW

FX-USB-AW

USB-SC09

USB-SC09-FX

SC-09+

SC-10

USB-QC30R2

FX2N-485-BD+

FX2N-485-BD

FX2N-422-BD

FX2N-232-BD

FX1N-485-BD

FX1N-422-BD

FX3U-485-BD

FX3U-422-BD

FX3U-232-BD

FX3U-USB-BD

1747-PIC

1747-UIC

1747-CP3

USB-1747-CP3

1761-CBL-PM02

USB-1761-CBL-PM02

More pictures for your reference:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

Permalink | Categories Siemens PLC programming cables on August 19, 2013 by nancy | No Comments
Tags: 6GK1551-2AA00, communication card, CP5512 Express, FWL, MPI, PPI, profibus, S7-200, S7-300, S7-400

Aug 18 2013

CP5512 card for Siemens 6GK1551-2AA00

Introduction to 6GK1551-2AA00

COMMUNICATION PROCESSOR CP 5512 PC CARD (CARDBUS, 32 BITS) FOR CONNECTION OF A PG OR NOTEBOOK TO PROFIBUS OR MPI

Data sheet of 6GK1551-2AA00

Product-type designation	CP 5512
	COMMUNICATION PROCESSOR CP 5512 PC CARD (CARDBUS, 32 BITS) FOR CONNECTION OF A PG OR NOTEBOOK TO PROFIBUS OR MPI
Transmission rate
Transmission rate
at interface 1 / in accordance with PROFIBUS
minimum	9.6 kbit/s
maximum	12 Mbit/s
Interfaces
Number of electrical connections / at interface 1 / in accordance with PROFIBUS	1
Design of electrical connection / at interface 1 / in accordance with PROFIBUS	9-pin Sub-D socket (RS 485)
Supply voltage, current consumption, power loss
Type of voltage	DC
Supply voltage
1 / from backplane bus	3.3 V
Relative symmetrical tolerance
at 3.3 V / with DC	5 %
Consumed current
1 / from backplane bus / with DC / maximum	0.52 A
Resistive loss	1.8 W
Permitted ambient conditions
Ambient temperature
during operating	5…45 °C
during storage	-20…+60 °C
during transport	-20…+60 °C
Relative humidity
at 25 °C / without condensation / during operating / maximum	95 %
Protection class IP	IP00
Design, dimensions and weight
Width	86 mm
Height	5 mm
Depth	54 mm
Net weight	130 g
Product properties, functions, components / general
Number of plug-in cards in the same design / can be plugged in / per PC station	1
Number of modules / note	-
Number of possible connections / for open communication / by means of SEND/RECEIVE / maximum	50
Software / for DP master function / required	Yes, SOFTNET-PB DP
Service / as DP master
DPV0	Yes
DPV1	No
DPV2	No
Number of DP slaves / on DP master / usable	64
Amount of data
of the address area of the inputs / as DP master / overall	7808 byte
of the address area of the outputs / as DP master / overall	7808 byte
of the address area of the inputs / per DP slave	244 byte
of the address area of the outputs / per DP slave	244 byte
of the address area of the diagnostic data / per DP slave	244 byte
Service / as DP slave
DPV0	Yes
DPV1	No
Amount of data
of the address area of the inputs / as DP slave / overall	122 byte
of the address area of the outputs / as DP slave / overall	122 byte
Number of possible connections / for S7/PG communication / maximum	8
Number of configurable connections / per PC station	207
Configuration software / required	NCM PC is included in scope of delivery of the required software product
Product function / Port diagnostics	Yes
Standards, specifications, approvals
Standard
for EMC	2004/108/EC
for safety / of CSA and UL	CAN/CSA C22.2 & UL 60950-1
for emitted interference	EN 61000-6-3, EN 61000-6-4
for interference immunity	EN 61000-6-1, EN 61000-6-2
Verification of suitability
CE mark	Yes
C-Tick	Yes

More details of CP5512, please find in below data sheet:

Communication card CP5512 Siemens S7-200-300-400 6GK1551-2AA00

Our company (Kollewin Technology CO., Limited) have a new product,

named CP5512.

It is 100% compatible with Siemens original part.

Part#: CP5512

EX-Work Price: $365.00/pc

User's manual PDF of CP5512 6GK1551-2AA00:

CP5512 introduction 6GK1551-2AA00

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Description of our compatible CP5512:

SIMATIC NET communication card for laptop,correspond to Siemens 6GK1551-2AA00,optoelectronic isolated,anti-lightning and surging,suitable for laptop PCMCIA 32bit CardBus slot,is used to achieve PROFIBUS/MPI/PPI/FWL communication connection between PC and SIMATIC,communication speed is 9.6Kbps~12Mbps.After switched over by the transition card,it can be used for desk computer and secondary generation ExpressCard slot laptop.CP5512 +(PCI->PCMCIA) transition card,then can be used for desk computer; CP5512 + (PCMCIA(II)->PCMCIA)transition card,then can be used for secondary generation ExpressCard slot laptop.

If you want to directly buy the CP5512 expresscard,please click this link to get: CP5512-Express
Not made by Siemens,OEM product

Not including MPI extension cable for card communication,if you also need this,please also order it:MPI Cable

Introduction of our CP5512:
CP5512 is the isolated PROFIBUS/MPI/PPI/FWL communication card specially for laptop, use iCoupler isolators eliminate optocoupler limitations instead of Photoelectric isolation,with small dimension, wide temperature range,and have anti-lightning and surging protective circuit and Overcurrent protection with restoration function on the RS485 interface, all use industrial IC in order to apply to wider temperature range, is used to achieve PROFIBUS/MPI/PPI/FWL communication connection between laptop and SIMATIC.
CP5512 insert laptop PCMCIA slot from outside. Its function and Features is the same as Siemens original CP5512(Siemens part nr 6GK1551-2AA00 ),and have the following new characters.

1. Card and RS485 adapter integrative design, small dimension, use conveniently and have anti-lightning and surging protective circuit on the RS485 interface.

2.Support hot plug, you can plug or unplug the card when the laptop is running. And card and adapter is integrated, so it’s not like original CP5512 which exist the hidden trouble that destroy the card when plug or unplug the card from the adapter with current.

3.Support common Express to PCMCIA transition card. You can use it on the Express slot laptop.

4.Support common PCI to PCMCIA transition card. You can use it on the desk computer and the function is the same as Siemens original CP5611 and CP5611 A2.

Communication service:
PROFIBUS-DP master station class 1 and 2
PROFIBUS-DP slave with SOFTNET-DP slave
MPI/PPI/FWL communication
S7 communication with SOFTNET-S7
S5-compatible communication (SEND/RECEIVE based on the FDL interface) with SOFTNET-DP or SOFTNET-S7

CP5512 can be used with:
STEP7 V5.2
SOFTNET-S7 V6.1
SOFTNET-DP, SOFTNET-DP slave from V6.1
STEP 7-Micro/WIN from V3.2 SP4
ProTool®, ProTool/Pro® V6.0 SP2
NCM PC from V5.2
SIMATIC PDM V5.2 SP1

Technical Specification of CP5512:
Transmission rate: 9.6Kbps～12Mbps,the corresponding largest communication distance accord with PROFIBUS standard.
Interface:connect PROFIBUS/MPI/PPI,isolated 9 pin Sub-D connector.
Isolated voltage:1000VDC
Interface protection:have anti-lightning and surging protection(Ipp=100A 10/700us,4KV) on the RS485 interface.ITU-TK20/21,VDE 0433 standard. ±15KV ESD protection. Overcurrent protection with restoration function：RS485 port can withstand up to 60V voltage caused by continuous over-current.
Standard working voltage:3.3 VDC
power：1.0W
working temperature：-20～+75℃
size：length* width * height(mm)：130×54×5（DB9F plug height:22mm）
weight：70g

CP5512

Support hardware of CP5512:
It’s different from PC Adapter and PC Adapter USB, CP5512 supports much more hardwares,such as Siemens S7-200/300/400PLC, PPI/MPI/PROFIBUS interface of touch panel, EM277,ET20 and other hardwares with PROFIBUS/MPI/PPI/FWL interface.
It need PROFIBUS cable or MPI cable(Siemens part nr 6ES7 901-0BF00-0AA0) when CP5512 communicates with fieldbus devices.

Signal definition of CP5512 Interface:

Pin No.	Signal name	Description	Input / Output
1	NC	Unused	-
2	NC	Unused	-
3	B（RXD+/TXD+）	RS485 Signal+	Input/Output
4	RTS_AS	Handshake signal	Input
5	Ground（0V）	Signal Ground	-
6	+5V	5V Power 50mA.max.	Output
7	NC	Unused	-
8	A（RXD-/TXD-）	RS485 Signal-	Input/Output
9	RTS_PG	Request	Output
Shell	PE	Shield	-

More compatible PLC Programming cables of Siemens

CP5611

CP5611-A2

CP5512

CP5512EXP-NEW

PC Adapter CN-NEW

ES-ETH-PPI-NEW

ETH Adapter CN-NEW

USB/PPIM+

PC/PPI

PC/PPI+

USB/MPI+ V4.0

USB/MPI+ V2.0

PC/MPI+ including RS232 cable

PC/MPI

LOGO!USB-CABLE

LOGO!PC-CABLE

MPI extension cable

PC/TTY

More pictures of our compatible cables of Siemens parts :

Other compatible PLC Programming cables, such as Mitsubishi/OMRON/Panasonic/GE/Fuji/Schneider/Allen-Bradley/Delta/Proface…

ES-ETH-SC09-NEW

FX-USB-AW

USB-SC09

USB-SC09-FX

SC-09+

SC-10

USB-QC30R2

FX2N-485-BD+

FX2N-485-BD

FX2N-422-BD

FX2N-232-BD

FX1N-485-BD

FX1N-422-BD

FX3U-485-BD

FX3U-422-BD

FX3U-232-BD

FX3U-USB-BD

1747-PIC

1747-UIC

1747-CP3

USB-1747-CP3

1761-CBL-PM02

USB-1761-CBL-PM02

More pictures for your reference:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

Permalink | Categories Siemens PLC programming cables on August 18, 2013 by nancy | 1 Comment
Tags: 6GK1551-2AA00, communication card, CP 5512, MPI, PPI, profibus, S7-200, S7-300, S7-400

Aug 15 2013

PC Adapter CN RS232 to PROFIBUS/MPI adapter

Introduction to PC Adapter CN

This adapter is compatible with Siemens PC Adapter and HMI adapter,fully support RS232 port of PC and HMI to PROFIBUS/MPI communication, use the Siemens special protocol processing chip,it can be used for Siemens S7-300/400 series PLC and other equipments with PROFIBUS/MPI interface. RS232-RS485-power supply are all optical isolated, especially suitable for the strong interference and communication interface easily damaged industrial scene.

It is 100% compatible with Siemens original part.

Part#: PC Adapter CN

EX-Work Price: $286.00/pc

Approx. Weight: 0.3Kg
Manufacturer: Kollewin
Warranty: 1 year
Origin: China

User's manual PDF of PC Adapter CN:

PC Adapter CN USER MANUAL

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products

PC Adapter CN is a high-tech adapter compatible with Siemens PC Adapter and HMI Adapter,fully support RS232 serial port of PC and HMI to PROFIBUS/MPI communication, adopt the Siemens protocol processor chip,no functional defects. PC Adapter CN is the opto-isolated adapter for industrial design.It has the surge protection and anti-lightning protection circuit on the RS232 interface and RS485 interface, support hot plug, is suitable for Siemens S7-300/400 series PLC and other equipments with PROFIBUS/MPI interface. In particular, it applies to the strong interfere industrial situations and the safeguard in the circuit guarantees the safely running of the system.
PC Adapter CN can communicate between S7-300/400PLC and RS232 interface of third party HMI,can replace the Siemens HMI Adapter.

The low version PC/MPI+ didn’t adopt the Siemens protocol processor chip,but adopt the MCU and use the software to achieve the profibus protocol,the protocol is not perfect and has the defect,only support MPI communication,not support profibus communication,can only connect few HMI and have the defect. When there are many nodes or third-party device in the network,it can’t identify every node. At the same time, it may have the risk that PC/MPI+ can’t be used after the PLC internal program is upgraded in the future.
Main Technical Specifications:

The network type and baud rate which PC Adapter CN supports:

Transmission rate	MPI	PPI	PROFIBUS
Transmission rate	MPI	PPI	DP	Standard	Universal
9.6Kbps	-	-	√	√	√
19.2Kbps	√	-	√	√	√
45.45Kbps	-	-	√	√	√
93.75Kbps	-	-	√	√	√
187.5Kbps	√	-	√	√	√
500Kbps	-	-	√	√	√
1.5Mbps	√	-	√	√

RS232 serial port baud rate which PC Adapter CN supports:

Transmission rate	RS232-PC	RS232-HMI
Transmission rate	RS232-PC	RS232-HMI
9.6Kbps	√ ⁽¹⁾	√
19.2Kbps	√	√
38.4Kbps	√	√
57.6Kbps	√⁽¹⁾	√
115.2Kbps	√ ⁽¹⁾	√

Note:You only can choose 19.2Kbps and 38.4Kbps baud rate in the STEP7 software,if you need to use other baud rates,it needs the tool software.

The following is the comparison between PC Adapter CN and other similar products:

Model Function	PC Adapter CN	PC/MPI+	PC Adapter SIEMENS	HMI Adapter SIEMENS	SSW7 Helmholz
PPI-Bus
9.6Kbps	-	-	-	-	-
19.2Kbps	-	-	-	-	-
187.5Kbps	-	-	-	-	-
MPI-Bus
19.2Kbps	√	√	√	√	√
187.5Kbps	√	√	√	√	√
1.5Mbps	√	-	√	√	-
PROFIBUS
9.6 Kbps	√	-	√	√	-
19.2 Kbps	√	-	√	√	-
45.45 Kbps	√	-	√	√	-
93.75 Kbps	√	-	√	√	-
187.5 Kbps	√	-	√	√	-
500 Kbps	√	-	√	√	-
1.5 Mbps	√	-	√	√	-
3 Mbps	-	-	-	-	-
6 Mbps	-	-	-	-	-
12 Mbps	-	-	-	-	-
PROFIBUS-Profil
DP	√	-	√	√	-
Standard	√	-	√	√	-
Universal(DP/FMS)	√	-	√	√	-
RS232-PC
9.6Kbps	√	√	-	√	√
19.2Kbps	√	√	√	√	√
38.4Kbps	√	√	√	√	√
57.6Kbps	√	√	-	√	√
115.2Kbps	√	√	-	√	√
RS232-HMI
9.6Kbps	√	-	-	√	-
19.2Kbps	√	-	√	√	-
38.4Kbps	√	-	√	√	-
57.6Kbps	√	-	-	√	-
115.2Kbps	√	-	-	√	-

● RS232 interface can connect PC or HMI etc third party devices,baud rate 9.6Kbps～115.2Kbps automatically adjust.
● Support PROFIBUS and MPI communication, auto bus protocol test,largest baud rate 1.5Mbps.
● Power supply from PLC port,24VDC, Power Consumption 2W,with over current and surge protection.
● Power-RS485-RS232 all isolated
● Opto-isolated voltage 1000VDC.
● RS232 interface has the anti-surging protection
● RS485 interface has the anti-lightning and surging protector, Repeatability surge capacity: Ipp=100A(10/700us，4KV),meet the standard ITU-TK20/21、VDE 0433. ±15KV ESD protection.
● Need additional 24VDC power for the long distance communication, the largest cable length meets the profibus standard.
● With the power indicator, data sending indicator, data receiving indicator
Can install the adapter on the S7-300/400PLC rail or 35MM standard rail.
● Shape Size: 123mm×68mm×30mm(Length*Width*Height),with the mounting bracket
● Working Temperature: -20～+75℃

We also have other compatible PLC Programming cables of Siemens

CP5611

CP5611-A2

CP5512

CP5512EXP-NEW

PC Adapter CN-NEW

ES-ETH-PPI-NEW

ETH Adapter CN-NEW

USB/PPIM+

PC/PPI

PC/PPI+

USB/MPI+ V4.0

USB/MPI+ V2.0

PC/MPI+ including RS232 cable

PC/MPI

LOGO!USB-CABLE

LOGO!PC-CABLE

MPI extension cable

PC/TTY

Here, more pictures of our compatible cables of Siemens parts

Of course, we also supply some other brands compatible PLC Programming cables, such as Mitsubishi/OMRON/Panasonic/GE/Fuji/Schneider/Allen-Bradley/Delta/Proface…

ES-ETH-SC09-NEW

FX-USB-AW

USB-SC09

USB-SC09-FX

SC-09+

SC-10

USB-QC30R2

FX2N-485-BD+

FX2N-485-BD

FX2N-422-BD

FX2N-232-BD

FX1N-485-BD