KW-DP90 diagnostic profibus connector
KW-DP90 90 degree diagnostic profibus connector
- A1,B1 are the Profibus input wire terminal blocks, A2,B2 are the Profibus output wire terminal blocks.
- Switch is the termination resistors switch, when the connector is at the end of the Profibus, you should put the switch on.
- When the RX and TX indicator flashes, it means the connector is receiving or sending data. Otherwise, if the LEDs long-on/long-off, the network fault.
- Operating voltage(From DB9) DC 4.25V~5.25V, <10mA, max 32 connectors in the same network.
- Baud Rate:9600~12Mbit/s; Temperature -20 ~ 75 ℃; Dimensions: 70 * 39.5 * 16mm; Material: PC + flame retardant
The diagnostic function can only work at the baud rate: 9600-3Mbit/s
A, Used in slave station for KW-DP90:
- RX, TX flash: the communication is OK.
- RX long-on: there is some station in error state on the bus, the error station occupation of the bus, continuous transmission.
- TX long-on: this station is in error state and occupation of the bus, continuous transmission.
- RX long-off: Profibus break, short circuit or master station is in error state.
- TX long-off: station in error state; station number is wrong, not the same as master configuration; GSD file error.
B, Used in master station KW-DP90:
- RX, TX flash: the communication is OK.
- RX long-on: there is some station in error state on the bus, the error station occupation of the bus, continuous transmission.
- TX long-on: this station is in error state and occupation of the bus, continuous transmission.
- RX long-off: this master station break with other slave station, or short circuit, or wrong configuration.
- TX long-off: this master station in error state, or the configuration is not finished.
User's Manual PDF of KW-DP90 profibus connector
The unit price USD25.00/pc, please contact me for order Nancy
More front connectors & profibus connectors we have:
20-pin & 40-pin & 48-pin front connector with screw-type contacts
20-PIN 6ES7 392-1AJ00-0AA0
40-PIN 6ES7 392-1AM00-0AA0
48-PIN 6ES7 492-1AL00-0AA0
| Model | Short Description |
| 6ES7 972-0BA12-0XA0 | Profibus connector,without PG port,90 degree |
| 6ES7 972-0BB12-0XA0 | Profibus connector,with PG port,90 degree |
| 6ES7 972-0BA41-0XA0 | Profibus Connector,without PG port,35 degree |
| 6ES7 972-0BB41-0XA0 | Profibus Connector,with PG port,35 degree |
| 6ES7 972-0BA42-0XA0 | Profibus Connector,without PG port,35 degree |
| 6ES7 972-0BB42-0XA0 | Profibus Connector,with PG port,35 degree |
| 6ES7 972-0BA50-0XA0 | DP ,90 DEGREE ,NO PROGRAMMING INTER，FAST CONNECT |
| 6ES7 972-0BB50-0XA0 | DP ,90 DEGREE ,WITH PROGRAMMING INTER，FAST CONNECT |
| 6ES7 972-0BA52-0XA0 | |
| 6ES7 972-0BB52-0XA0 | |
| 6GK1500-0FC00 | |
| 6GK1500-0FC10 | |
| 6GK1500-0EA02 | |
| 6ES7 291-8GF23 | Plus memory card (capacity of 64K) |
| 6ES7 290-6AA20 | |
| 6ES7 307-1EA01-0AA0 | power supply,5A,24VDC output,120/230VAC input |
| 6ES7 307-1KA02-0AA0 |
SIMATIC S7-300
STABILIZED POWER SUPPLY PS307
INPUT: 120/230 V AC
OUTPUT: DC 24 V DC/10 A |
| 6ES7 390-1AF30-0AA0 | S7-300 PLC rail,530 MM length. |
| 6ES7 390-1AJ30-0AA0 | S7-300 PLC rail,830 MM length. |
| 6ES7 390-1AB60-0AA0 | S7-300 PLC rail,160 MM length. |
| 6ES7 390-1AE80-0AA0 | S7-300 PLC rail,482 MM length. |
| 6ES7 390-1BC00-0AA0 | S7-300 PLC rail,2000 MM length. |
| 6ES7195-1GA00-0XA0 | hot plug rail,483mm |
| 6ES7195-1GF30-0XA0 | hot plug rail,530mm |
| 6ES7195-1GG30-0XA0 | hot plug rail,620mm |
| 6ES7195-1GC00-0XA0 | hot plug rail,2000mm |
| 6XV1-830-0EH10 | Profibus cable |
| 6XV1840-2AH10 | profibus cable |
| 6XV1830-3EH10 | profibus cable |
All of our compatible products are tested one by one by our Engineer department before shipment.
More compatible Siemens accessories we can offer：
Please feel free to contact me for any question!
Contact person: Miss Nancy
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com
Recent Comments