CP5611-A2 card for Siemens 6GK1561-1AA01
Introduction to 6GK1561-1AA01 (CP5611-A2)
COMMUNICATION PROCESSOR CP 5611 A2 PCI-CARD (32 BIT; 3.3/5V;33/ 66 MHZ) FOR CONNECTION TO PG OR PC WITH PCI-BUS TO PROFIBUS OR MPI (NO WIN9X-SUPPORT!) CURRENTLY ONLY 32BIT SUPPORT IN CONNECTION WITH SIMATIC NET V8.2 SW!
| Product-type designation | CP 5611 A2 |
|
COMMUNICATION PROCESSOR CP 5611 A2 PCI-CARD (32 BIT; 3.3/5V;33/ 66 MHZ) FOR CONNECTION TO PG OR PC WITH PCI-BUS TO PROFIBUS OR MPI (NO WIN9X-SUPPORT!) CURRENTLY ONLY 32BIT SUPPORT IN CONNECTION WITH SIMATIC NET V8.2 SW!
|
| Transmission rate | |
| Transmission rate | |
|
|
|
9.6 kbit/s |
|
12 Mbit/s |
| Interfaces | |
| Number of electrical connections / at interface 1 / in accordance with PROFIBUS | 1 |
| Design of electrical connection / at interface 1 / in accordance with PROFIBUS | 9-pin Sub-D socket (RS 485) |
| Supply voltage, current consumption, power loss | |
| Type of voltage | DC |
| Supply voltage | |
|
5 V |
| Relative symmetrical tolerance | |
|
5 % |
| Consumed current | |
|
0.5 A |
| Resistive loss | 2.5 W |
| Permitted ambient conditions | |
| Ambient temperature | |
|
5…55 °C |
|
-20…+60 °C |
|
-20…+60 °C |
| Relative humidity | |
|
95 % |
| Protection class IP | IP00 |
| Design, dimensions and weight | |
| Width | 18 mm |
| Height | 102 mm |
| Depth | 130 mm |
| Net weight | 100 g |
| Product properties, functions, components / general | |
| Number of plug-in cards in the same design / can be plugged in / per PC station | 1 |
| Number of modules / note | - |
| Number of possible connections / for open communication / by means of SEND/RECEIVE / maximum | 50 |
| Software / for DP master function / required | Yes, SOFTNET-PB DP |
| Service / as DP master | |
|
Yes |
|
Yes |
|
No |
| Number of DP slaves / on DP master / usable | 64 |
| Amount of data | |
|
14640 byte |
|
14640 byte |
|
244 byte |
|
244 byte |
|
244 byte |
| Service / as DP slave | |
|
Yes |
|
No |
| Amount of data | |
|
122 byte |
|
122 byte |
| Number of possible connections / for S7/PG communication / maximum | 8 |
| Number of configurable connections / per PC station | 207 |
| Configuration software / required | NCM PC is included in scope of delivery of the required software product |
| Product function / Port diagnostics | Yes |
| Standards, specifications, approvals | |
| Standard | |
|
89/336/EEC |
|
CAN/CSA C22.2 & UL 60950-1, UL 1950 |
|
EN 61000-6-3 |
|
EN 61000-6-2 |
| Verification of suitability | |
|
Yes |
|
Yes |
| Accessories | |
| Accessories | optional: MPI cable |
Our company (Kollewin Technology CO., Limited) have a new product,
named CP5611-A2.
It is 100% compatible with Siemens original part.
Part#: CP5611-A2
EX-Work Price: $259.00/pc 
User's manual PDF of CP5611-A2 communication card 6GK1561-1AA01:
CP5611-A2 communication card 6GK1561-1AA01
It's tested before shippment.Not made by Siemens,OEM product as the replacement.
The quality is guaranteed, we have 1 year warranty for our compatible products.
CP5611-A2 communications cards which is Anti-lightning and anti-surge, corresponding to the Siemens 6 GK1 561-1AA01, photoelectric isolation, and applied to desktop computer's PCI slots, to achieve the PROFIBUS DP / MPI / PPI communications between PC or PG and the SIMATIC network, communication rate is 9.6 Kbps ~ 12Mbps.
Not made by Siemens,OEM product
Not including MPI extension cable for card communication,if you also need this,please also order it:
Overview of communication card CP5611-A2:
CP5611-A2 communication card is optoelectronic isolated design for industrial applications.There is anti-lightning & anti-surging protection circuit and over-current protection on the RS485 port.The adoption of industrial chip applies to a wide temperature range. CP5611-A2 card is used to achieve the PROFIBUS DP / MPI / PPI communication between PC or PG and the SIMATIC network.
Communication services:
PROFIBUS-DP master grade 1 and 2
PROFIBUS-DP slave and SOFTNET-DP slave
MPI/PPI communication
PG/OP communication
S7 communication with SOFTNET-S7
S5-compatible communication (SEND/RECEIVE based on the FDL interface) with SOFTNET-DP or SOFTNET-S7
CP5611-A2 applies to the following software:
STEP7 V.52 and above
SOFTNET-S7
SOFTNET-DP
SOFTNET-DP slave
COM PROFIVUS V3.3 and above
STEP 7-Micro/WIN V3.1 and above
ProTool, ProToo/Pro
NCMPC
Technical specifications of communication card CP5512-A2:
Transmission rate:9.6Kbps~12Mbps, corresponding maximum communication distance conforms to PROFIBUS standard
Interface: PROFIBUS/MPI/PPI, isolated 9-pin Sub-D socket
Isolation Voltage: 1000VDC
RS485 port with anti-lightning and anti-surging protector, repeatability surge capacity: Ipp = 100A (10/700us, 4KV)
Standard: ITU-TK20/21, VDE 0433. ± 15KV ESD (ESD) protection
Over-current protection: RS485 interface can withstand up to 60V voltage caused by the sustained over-current
PG/PC connection: PCI2.1 standard slot
Standard voltage: +5 VDC
Power: 2.0W
Operating temperature: 0 ~ + 70 'C
Size (width x high) (mm): 102 x 130
Weight: 100g
We also have other compatible PLC Programming cables of Siemens
Here, more pictures of our compatible cables of Siemens parts
Of course, we also supply some other brands compatible PLC Programming cables, such as Mitsubishi/OMRON/Panasonic/GE/Fuji/Schneider/Allen-Bradley/Delta/Proface…
Pictures for your reference:
Please feel free to contact me for any question!
Contact person: Miss Nancy
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com
Recent Comments