Posts Tagged CP 5512

Aug 18 2013

CP5512 card for Siemens 6GK1551-2AA00

Introduction to 6GK1551-2AA00

COMMUNICATION PROCESSOR CP 5512 PC CARD (CARDBUS, 32 BITS) FOR CONNECTION OF A PG OR NOTEBOOK TO PROFIBUS OR MPI

Data sheet of 6GK1551-2AA00

Product-type designation	CP 5512
	COMMUNICATION PROCESSOR CP 5512 PC CARD (CARDBUS, 32 BITS) FOR CONNECTION OF A PG OR NOTEBOOK TO PROFIBUS OR MPI
Transmission rate
Transmission rate
at interface 1 / in accordance with PROFIBUS
minimum	9.6 kbit/s
maximum	12 Mbit/s
Interfaces
Number of electrical connections / at interface 1 / in accordance with PROFIBUS	1
Design of electrical connection / at interface 1 / in accordance with PROFIBUS	9-pin Sub-D socket (RS 485)
Supply voltage, current consumption, power loss
Type of voltage	DC
Supply voltage
1 / from backplane bus	3.3 V
Relative symmetrical tolerance
at 3.3 V / with DC	5 %
Consumed current
1 / from backplane bus / with DC / maximum	0.52 A
Resistive loss	1.8 W
Permitted ambient conditions
Ambient temperature
during operating	5…45 °C
during storage	-20…+60 °C
during transport	-20…+60 °C
Relative humidity
at 25 °C / without condensation / during operating / maximum	95 %
Protection class IP	IP00
Design, dimensions and weight
Width	86 mm
Height	5 mm
Depth	54 mm
Net weight	130 g
Product properties, functions, components / general
Number of plug-in cards in the same design / can be plugged in / per PC station	1
Number of modules / note	-
Number of possible connections / for open communication / by means of SEND/RECEIVE / maximum	50
Software / for DP master function / required	Yes, SOFTNET-PB DP
Service / as DP master
DPV0	Yes
DPV1	No
DPV2	No
Number of DP slaves / on DP master / usable	64
Amount of data
of the address area of the inputs / as DP master / overall	7808 byte
of the address area of the outputs / as DP master / overall	7808 byte
of the address area of the inputs / per DP slave	244 byte
of the address area of the outputs / per DP slave	244 byte
of the address area of the diagnostic data / per DP slave	244 byte
Service / as DP slave
DPV0	Yes
DPV1	No
Amount of data
of the address area of the inputs / as DP slave / overall	122 byte
of the address area of the outputs / as DP slave / overall	122 byte
Number of possible connections / for S7/PG communication / maximum	8
Number of configurable connections / per PC station	207
Configuration software / required	NCM PC is included in scope of delivery of the required software product
Product function / Port diagnostics	Yes
Standards, specifications, approvals
Standard
for EMC	2004/108/EC
for safety / of CSA and UL	CAN/CSA C22.2 & UL 60950-1
for emitted interference	EN 61000-6-3, EN 61000-6-4
for interference immunity	EN 61000-6-1, EN 61000-6-2
Verification of suitability
CE mark	Yes
C-Tick	Yes

More details of CP5512, please find in below data sheet:

Communication card CP5512 Siemens S7-200-300-400 6GK1551-2AA00

Our company (Kollewin Technology CO., Limited) have a new product,

named CP5512.

It is 100% compatible with Siemens original part.

Part#: CP5512

EX-Work Price: $365.00/pc

User's manual PDF of CP5512 6GK1551-2AA00:

CP5512 introduction 6GK1551-2AA00

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Description of our compatible CP5512:

SIMATIC NET communication card for laptop,correspond to Siemens 6GK1551-2AA00,optoelectronic isolated,anti-lightning and surging,suitable for laptop PCMCIA 32bit CardBus slot,is used to achieve PROFIBUS/MPI/PPI/FWL communication connection between PC and SIMATIC,communication speed is 9.6Kbps~12Mbps.After switched over by the transition card,it can be used for desk computer and secondary generation ExpressCard slot laptop.CP5512 +(PCI->PCMCIA) transition card,then can be used for desk computer; CP5512 + (PCMCIA(II)->PCMCIA)transition card,then can be used for secondary generation ExpressCard slot laptop.

If you want to directly buy the CP5512 expresscard,please click this link to get: CP5512-Express
Not made by Siemens,OEM product

Not including MPI extension cable for card communication,if you also need this,please also order it:MPI Cable

Introduction of our CP5512:
CP5512 is the isolated PROFIBUS/MPI/PPI/FWL communication card specially for laptop, use iCoupler isolators eliminate optocoupler limitations instead of Photoelectric isolation,with small dimension, wide temperature range,and have anti-lightning and surging protective circuit and Overcurrent protection with restoration function on the RS485 interface, all use industrial IC in order to apply to wider temperature range, is used to achieve PROFIBUS/MPI/PPI/FWL communication connection between laptop and SIMATIC.
CP5512 insert laptop PCMCIA slot from outside. Its function and Features is the same as Siemens original CP5512(Siemens part nr 6GK1551-2AA00 ),and have the following new characters.

1. Card and RS485 adapter integrative design, small dimension, use conveniently and have anti-lightning and surging protective circuit on the RS485 interface.

2.Support hot plug, you can plug or unplug the card when the laptop is running. And card and adapter is integrated, so it’s not like original CP5512 which exist the hidden trouble that destroy the card when plug or unplug the card from the adapter with current.

3.Support common Express to PCMCIA transition card. You can use it on the Express slot laptop.

4.Support common PCI to PCMCIA transition card. You can use it on the desk computer and the function is the same as Siemens original CP5611 and CP5611 A2.

Communication service:
PROFIBUS-DP master station class 1 and 2
PROFIBUS-DP slave with SOFTNET-DP slave
MPI/PPI/FWL communication
S7 communication with SOFTNET-S7
S5-compatible communication (SEND/RECEIVE based on the FDL interface) with SOFTNET-DP or SOFTNET-S7

CP5512 can be used with:
STEP7 V5.2
SOFTNET-S7 V6.1
SOFTNET-DP, SOFTNET-DP slave from V6.1
STEP 7-Micro/WIN from V3.2 SP4
ProTool®, ProTool/Pro® V6.0 SP2
NCM PC from V5.2
SIMATIC PDM V5.2 SP1

Technical Specification of CP5512:
Transmission rate: 9.6Kbps～12Mbps,the corresponding largest communication distance accord with PROFIBUS standard.
Interface:connect PROFIBUS/MPI/PPI,isolated 9 pin Sub-D connector.
Isolated voltage:1000VDC
Interface protection:have anti-lightning and surging protection(Ipp=100A 10/700us,4KV) on the RS485 interface.ITU-TK20/21,VDE 0433 standard. ±15KV ESD protection. Overcurrent protection with restoration function：RS485 port can withstand up to 60V voltage caused by continuous over-current.
Standard working voltage:3.3 VDC
power：1.0W
working temperature：-20～+75℃
size：length* width * height(mm)：130×54×5（DB9F plug height:22mm）
weight：70g

CP5512

Support hardware of CP5512:
It’s different from PC Adapter and PC Adapter USB, CP5512 supports much more hardwares,such as Siemens S7-200/300/400PLC, PPI/MPI/PROFIBUS interface of touch panel, EM277,ET20 and other hardwares with PROFIBUS/MPI/PPI/FWL interface.
It need PROFIBUS cable or MPI cable(Siemens part nr 6ES7 901-0BF00-0AA0) when CP5512 communicates with fieldbus devices.

Signal definition of CP5512 Interface:

Pin No.	Signal name	Description	Input / Output
1	NC	Unused	-
2	NC	Unused	-
3	B（RXD+/TXD+）	RS485 Signal+	Input/Output
4	RTS_AS	Handshake signal	Input
5	Ground（0V）	Signal Ground	-
6	+5V	5V Power 50mA.max.	Output
7	NC	Unused	-
8	A（RXD-/TXD-）	RS485 Signal-	Input/Output
9	RTS_PG	Request	Output
Shell	PE	Shield	-