<a href="https://www.profibus-connector.com/" title="Profibus Connector" rel="home">Profibus Connector

USB/PPIM+

PC/PPI

PC/PPI+

PC/MPI

PC/TTY

More pictures of our compatible cables of Siemens parts :

Other compatible PLC Programming cables, such as Mitsubishi/OMRON/Panasonic/GE/Fuji/Schneider/Allen-Bradley/Delta/Proface…

FX-USB-AW

SC-09+

SC-10

Communication card CP5512 Siemens S7-200-300-400 6GK1551-2AA00

FX1N-422-BD

FX3U-485-BD

FX3U-422-BD

FX3U-232-BD

FX3U-USB-BD

1747-PIC

1747-UIC

1747-CP3

USB-1747-CP3

1761-CBL-PM02

USB-1761-CBL-PM02

More pictures for your reference:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

Permalink | Categories Siemens PLC programming cables on August 19, 2013 by nancy | No Comments
Tags: 6GK1551-2AA00, communication card, CP5512 Express, FWL, MPI, PPI, profibus, S7-200, S7-300, S7-400

Aug 18 2013

CP5512 card for Siemens 6GK1551-2AA00

Introduction to 6GK1551-2AA00

COMMUNICATION PROCESSOR CP 5512 PC CARD (CARDBUS, 32 BITS) FOR CONNECTION OF A PG OR NOTEBOOK TO PROFIBUS OR MPI

Data sheet of 6GK1551-2AA00

Product-type designation	CP 5512
	COMMUNICATION PROCESSOR CP 5512 PC CARD (CARDBUS, 32 BITS) FOR CONNECTION OF A PG OR NOTEBOOK TO PROFIBUS OR MPI
Transmission rate
Transmission rate
at interface 1 / in accordance with PROFIBUS
minimum	9.6 kbit/s
maximum	12 Mbit/s
Interfaces
Number of electrical connections / at interface 1 / in accordance with PROFIBUS	1
Design of electrical connection / at interface 1 / in accordance with PROFIBUS	9-pin Sub-D socket (RS 485)
Supply voltage, current consumption, power loss
Type of voltage	DC
Supply voltage
1 / from backplane bus	3.3 V
Relative symmetrical tolerance
at 3.3 V / with DC	5 %
Consumed current
1 / from backplane bus / with DC / maximum	0.52 A
Resistive loss	1.8 W
Permitted ambient conditions
Ambient temperature
during operating	5…45 °C
during storage	-20…+60 °C
during transport	-20…+60 °C
Relative humidity
at 25 °C / without condensation / during operating / maximum	95 %
Protection class IP	IP00
Design, dimensions and weight
Width	86 mm
Height	5 mm
Depth	54 mm
Net weight	130 g
Product properties, functions, components / general
Number of plug-in cards in the same design / can be plugged in / per PC station	1
Number of modules / note	-
Number of possible connections / for open communication / by means of SEND/RECEIVE / maximum	50
Software / for DP master function / required	Yes, SOFTNET-PB DP
Service / as DP master
DPV0	Yes
DPV1	No
DPV2	No
Number of DP slaves / on DP master / usable	64
Amount of data
of the address area of the inputs / as DP master / overall	7808 byte
of the address area of the outputs / as DP master / overall	7808 byte
of the address area of the inputs / per DP slave	244 byte
of the address area of the outputs / per DP slave	244 byte
of the address area of the diagnostic data / per DP slave	244 byte
Service / as DP slave
DPV0	Yes
DPV1	No
Amount of data
of the address area of the inputs / as DP slave / overall	122 byte
of the address area of the outputs / as DP slave / overall	122 byte
Number of possible connections / for S7/PG communication / maximum	8
Number of configurable connections / per PC station	207
Configuration software / required	NCM PC is included in scope of delivery of the required software product
Product function / Port diagnostics	Yes
Standards, specifications, approvals
Standard
for EMC	2004/108/EC
for safety / of CSA and UL	CAN/CSA C22.2 & UL 60950-1
for emitted interference	EN 61000-6-3, EN 61000-6-4
for interference immunity	EN 61000-6-1, EN 61000-6-2
Verification of suitability
CE mark	Yes
C-Tick	Yes

More details of CP5512, please find in below data sheet:

Our company (Kollewin Technology CO., Limited) have a new product,

named CP5512.

It is 100% compatible with Siemens original part.

Part#: CP5512

EX-Work Price: $365.00/pc

User's manual PDF of CP5512 6GK1551-2AA00:

CP5512 introduction 6GK1551-2AA00

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Description of our compatible CP5512:

SIMATIC NET communication card for laptop,correspond to Siemens 6GK1551-2AA00,optoelectronic isolated,anti-lightning and surging,suitable for laptop PCMCIA 32bit CardBus slot,is used to achieve PROFIBUS/MPI/PPI/FWL communication connection between PC and SIMATIC,communication speed is 9.6Kbps~12Mbps.After switched over by the transition card,it can be used for desk computer and secondary generation ExpressCard slot laptop.CP5512 +(PCI->PCMCIA) transition card,then can be used for desk computer; CP5512 + (PCMCIA(II)->PCMCIA)transition card,then can be used for secondary generation ExpressCard slot laptop.

If you want to directly buy the CP5512 expresscard,please click this link to get: CP5512-Express
Not made by Siemens,OEM product

Not including MPI extension cable for card communication,if you also need this,please also order it:MPI Cable

Introduction of our CP5512:
CP5512 is the isolated PROFIBUS/MPI/PPI/FWL communication card specially for laptop, use iCoupler isolators eliminate optocoupler limitations instead of Photoelectric isolation,with small dimension, wide temperature range,and have anti-lightning and surging protective circuit and Overcurrent protection with restoration function on the RS485 interface, all use industrial IC in order to apply to wider temperature range, is used to achieve PROFIBUS/MPI/PPI/FWL communication connection between laptop and SIMATIC.
CP5512 insert laptop PCMCIA slot from outside. Its function and Features is the same as Siemens original CP5512(Siemens part nr 6GK1551-2AA00 ),and have the following new characters.

1. Card and RS485 adapter integrative design, small dimension, use conveniently and have anti-lightning and surging protective circuit on the RS485 interface.

2.Support hot plug, you can plug or unplug the card when the laptop is running. And card and adapter is integrated, so it’s not like original CP5512 which exist the hidden trouble that destroy the card when plug or unplug the card from the adapter with current.

3.Support common Express to PCMCIA transition card. You can use it on the Express slot laptop.

4.Support common PCI to PCMCIA transition card. You can use it on the desk computer and the function is the same as Siemens original CP5611 and CP5611 A2.

Communication service:
PROFIBUS-DP master station class 1 and 2
PROFIBUS-DP slave with SOFTNET-DP slave
MPI/PPI/FWL communication
S7 communication with SOFTNET-S7
S5-compatible communication (SEND/RECEIVE based on the FDL interface) with SOFTNET-DP or SOFTNET-S7

CP5512 can be used with:
STEP7 V5.2
SOFTNET-S7 V6.1
SOFTNET-DP, SOFTNET-DP slave from V6.1
STEP 7-Micro/WIN from V3.2 SP4
ProTool®, ProTool/Pro® V6.0 SP2
NCM PC from V5.2
SIMATIC PDM V5.2 SP1

Technical Specification of CP5512:
Transmission rate: 9.6Kbps～12Mbps,the corresponding largest communication distance accord with PROFIBUS standard.
Interface:connect PROFIBUS/MPI/PPI,isolated 9 pin Sub-D connector.
Isolated voltage:1000VDC
Interface protection:have anti-lightning and surging protection(Ipp=100A 10/700us,4KV) on the RS485 interface.ITU-TK20/21,VDE 0433 standard. ±15KV ESD protection. Overcurrent protection with restoration function：RS485 port can withstand up to 60V voltage caused by continuous over-current.
Standard working voltage:3.3 VDC
power：1.0W
working temperature：-20～+75℃
size：length* width * height(mm)：130×54×5（DB9F plug height:22mm）
weight：70g

CP5512

Support hardware of CP5512:
It’s different from PC Adapter and PC Adapter USB, CP5512 supports much more hardwares,such as Siemens S7-200/300/400PLC, PPI/MPI/PROFIBUS interface of touch panel, EM277,ET20 and other hardwares with PROFIBUS/MPI/PPI/FWL interface.
It need PROFIBUS cable or MPI cable(Siemens part nr 6ES7 901-0BF00-0AA0) when CP5512 communicates with fieldbus devices.

Signal definition of CP5512 Interface:

Pin No.	Signal name	Description	Input / Output
1	NC	Unused	-
2	NC	Unused	-
3	B（RXD+/TXD+）	RS485 Signal+	Input/Output
4	RTS_AS	Handshake signal	Input
5	Ground（0V）	Signal Ground	-
6	+5V	5V Power 50mA.max.	Output
7	NC	Unused	-
8	A（RXD-/TXD-）	RS485 Signal-	Input/Output
9	RTS_PG	Request	Output
Shell	PE	Shield	-

More compatible PLC Programming cables of Siemens

CP5611

CP5611-A2

CP5512

USB/PPIM+

PC/PPI

PC/PPI+

PC/MPI

PC/TTY

More pictures of our compatible cables of Siemens parts :

Other compatible PLC Programming cables, such as Mitsubishi/OMRON/Panasonic/GE/Fuji/Schneider/Allen-Bradley/Delta/Proface…

FX-USB-AW

SC-09+

SC-10

CP5611-A2 communication card 6GK1561-1AA01

FX1N-422-BD

FX3U-485-BD

FX3U-422-BD

FX3U-232-BD

FX3U-USB-BD

1747-PIC

1747-UIC

1747-CP3

USB-1747-CP3

1761-CBL-PM02

USB-1761-CBL-PM02

More pictures for your reference:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

Permalink | Categories Siemens PLC programming cables on August 18, 2013 by nancy | 1 Comment
Tags: 6GK1551-2AA00, communication card, CP 5512, MPI, PPI, profibus, S7-200, S7-300, S7-400

Aug 17 2013

CP5611-A2 card for Siemens 6GK1561-1AA01

Introduction to 6GK1561-1AA01 (CP5611-A2)

COMMUNICATION PROCESSOR CP 5611 A2 PCI-CARD (32 BIT; 3.3/5V;33/ 66 MHZ) FOR CONNECTION TO PG OR PC WITH PCI-BUS TO PROFIBUS OR MPI (NO WIN9X-SUPPORT!) CURRENTLY ONLY 32BIT SUPPORT IN CONNECTION WITH SIMATIC NET V8.2 SW!

Data sheet of 6GK1561-1AA01.

Product-type designation	CP 5611 A2
	COMMUNICATION PROCESSOR CP 5611 A2 PCI-CARD (32 BIT; 3.3/5V;33/ 66 MHZ) FOR CONNECTION TO PG OR PC WITH PCI-BUS TO PROFIBUS OR MPI (NO WIN9X-SUPPORT!) CURRENTLY ONLY 32BIT SUPPORT IN CONNECTION WITH SIMATIC NET V8.2 SW!
Transmission rate
Transmission rate
at interface 1 / in accordance with PROFIBUS
minimum	9.6 kbit/s
maximum	12 Mbit/s
Interfaces
Number of electrical connections / at interface 1 / in accordance with PROFIBUS	1
Design of electrical connection / at interface 1 / in accordance with PROFIBUS	9-pin Sub-D socket (RS 485)
Supply voltage, current consumption, power loss
Type of voltage	DC
Supply voltage
1 / from backplane bus	5 V
Relative symmetrical tolerance
at 5 V / with DC	5 %
Consumed current
1 / from backplane bus / with DC / maximum	0.5 A
Resistive loss	2.5 W
Permitted ambient conditions
Ambient temperature
during operating	5…55 °C
during storage	-20…+60 °C
during transport	-20…+60 °C
Relative humidity
at 25 °C / without condensation / during operating / maximum	95 %
Protection class IP	IP00
Design, dimensions and weight
Width	18 mm
Height	102 mm
Depth	130 mm
Net weight	100 g
Product properties, functions, components / general
Number of plug-in cards in the same design / can be plugged in / per PC station	1
Number of modules / note	-
Number of possible connections / for open communication / by means of SEND/RECEIVE / maximum	50
Software / for DP master function / required	Yes, SOFTNET-PB DP
Service / as DP master
DPV0	Yes
DPV1	Yes
DPV2	No
Number of DP slaves / on DP master / usable	64
Amount of data
of the address area of the inputs / as DP master / overall	14640 byte
of the address area of the outputs / as DP master / overall	14640 byte
of the address area of the inputs / per DP slave	244 byte
of the address area of the outputs / per DP slave	244 byte
of the address area of the diagnostic data / per DP slave	244 byte
Service / as DP slave
DPV0	Yes
DPV1	No
Amount of data
of the address area of the inputs / as DP slave / overall	122 byte
of the address area of the outputs / as DP slave / overall	122 byte
Number of possible connections / for S7/PG communication / maximum	8
Number of configurable connections / per PC station	207
Configuration software / required	NCM PC is included in scope of delivery of the required software product
Product function / Port diagnostics	Yes
Standards, specifications, approvals
Standard
for EMC	89/336/EEC
for safety / of CSA and UL	CAN/CSA C22.2 & UL 60950-1, UL 1950
for emitted interference	EN 61000-6-3
for interference immunity	EN 61000-6-2
Verification of suitability
CE mark	Yes
C-Tick	Yes
Accessories
Accessories	optional: MPI cable

More details of CP5611-A2, please find in below data sheet:

CP5611-A2 communication card 6GK1561-1AA01

Our company (Kollewin Technology CO., Limited) have a new product,

named CP5611-A2.

It is 100% compatible with Siemens original part.

Part#: CP5611-A2

EX-Work Price: $259.00/pc

User's manual PDF of CP5611-A2 communication card 6GK1561-1AA01:

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Description of our compatible communication card CP5512-A2:

CP5611-A2 communications cards which is Anti-lightning and anti-surge, corresponding to the Siemens 6 GK1 561-1AA01, photoelectric isolation, and applied to desktop computer's PCI slots, to achieve the PROFIBUS DP / MPI / PPI communications between PC or PG and the SIMATIC network, communication rate is 9.6 Kbps ~ 12Mbps.

Not made by Siemens,OEM product

Not including MPI extension cable for card communication,if you also need this,please also order it:

MPI Cable

Overview of communication card CP5611-A2:
CP5611-A2 communication card is optoelectronic isolated design for industrial applications.There is anti-lightning & anti-surging protection circuit and over-current protection on the RS485 port.The adoption of industrial chip applies to a wide temperature range. CP5611-A2 card is used to achieve the PROFIBUS DP / MPI / PPI communication between PC or PG and the SIMATIC network.

Communication services:
PROFIBUS-DP master grade 1 and 2
PROFIBUS-DP slave and SOFTNET-DP slave
MPI/PPI communication
PG/OP communication
S7 communication with SOFTNET-S7

S5-compatible communication (SEND/RECEIVE based on the FDL interface) with SOFTNET-DP or SOFTNET-S7

CP5611-A2 applies to the following software:
STEP7 V.52 and above
SOFTNET-S7
SOFTNET-DP
SOFTNET-DP slave
COM PROFIVUS V3.3 and above
STEP 7-Micro/WIN V3.1 and above
ProTool, ProToo/Pro
NCMPC

Technical specifications of communication card CP5512-A2:

Transmission rate:9.6Kbps~12Mbps, corresponding maximum communication distance conforms to PROFIBUS standard
Interface: PROFIBUS/MPI/PPI, isolated 9-pin Sub-D socket
Isolation Voltage: 1000VDC
RS485 port with anti-lightning and anti-surging protector, repeatability surge capacity: Ipp = 100A (10/700us, 4KV)
Standard: ITU-TK20/21, VDE 0433. ± 15KV ESD (ESD) protection
Over-current protection: RS485 interface can withstand up to 60V voltage caused by the sustained over-current
PG/PC connection: PCI2.1 standard slot
Standard voltage: +5 VDC
Power: 2.0W
Operating temperature: 0 ~ + 70 'C
Size (width x high) (mm): 102 x 130
Weight: 100g

We also have other compatible PLC Programming cables of Siemens

CP5611

CP5611-A2

CP5512

USB/PPIM+

PC/PPI

PC/PPI+

PC/MPI

PC/TTY

Here, more pictures of our compatible cables of Siemens parts

Of course, we also supply some other brands compatible PLC Programming cables, such as Mitsubishi/OMRON/Panasonic/GE/Fuji/Schneider/Allen-Bradley/Delta/Proface…

FX-USB-AW

SC-09+

SC-10

CP5611 Card introduction card 6GK1561-1AA00

FX1N-422-BD

FX3U-485-BD

FX3U-422-BD

FX3U-232-BD

FX3U-USB-BD

1747-PIC

1747-UIC

1747-CP3

USB-1747-CP3

1761-CBL-PM02

USB-1761-CBL-PM02

Pictures for your reference:

Please feel free to contact me for any question!

Contact person: Miss Nancy

Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com

Permalink | Categories Siemens PLC programming cables on August 17, 2013 by nancy | No Comments
Tags: communication card, CP5611-A2, DP, MPI, PCI, PPI, profibus

Aug 16 2013

CP5611 card for Siemens 6GK1561-1AA00

Introduction to 6GK1561-1AA00 (CP5611)

COMMUNICATION PROCESSOR CP 5611 PCI CARD (32 BIT) FOR CONNECTION OF A PG OR PC WITH PCI BUS TO PROFIBUS OR MPI

Data sheet of Siemens original 6GK1561-1AA00:

Product-type designation	CP 5611
	COMMUNICATION PROCESSOR CP 5611 PCI CARD (32 BIT) FOR CONNECTION OF A PG OR PC WITH PCI BUS TO PROFIBUS OR MPI

More details of CP5611, please find in below data sheet:

6GK1561-1AA00 CP5611 manual

Our company (Kollewin Technology CO., Limited) have a new product,

named CP5611.

It is 100% compatible with Siemens original part.

Part#: CP5611

EX-Work Price: $190.00/pc

User's manual PDF of CP5611 communication card 6GK1561-1AA00:

It's tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Decription of our compatible communication card CP5611:

CP5611 communications cards which is Anti-lightning and anti-surge, corresponding to the Siemens 6 GK1 561-1AA00, photoelectric isolation, and applied to desktop computer's PCI slots, to achieve the PROFIBUS DP / MPI / PPI communications between PC or PG and the SIMATIC network, communication rate is 9.6 Kbps ~ 12Mbps.

Not made by Siemens,OEM product

Not including MPI extension cable for card communication,if you also need this,please also order it:

MPI cable

Overview of communication card CP5611:
CP5611 communication card is optoelectronic isolated design for industrial applications.There is anti-lightning & anti-surging protection circuit and over-current protection on the RS485 port.The adoption of industrial chip applies to a wide temperature range. CP5611 card is used to achieve the PROFIBUS DP / MPI / PPI communication between PC or PG and the SIMATIC network.

Communication services:
PROFIBUS-DP master grade 1 and 2
PROFIBUS-DP slave and SOFTNET-DP slave
MPI/PPI communication
PG/OP communication
S7 communication with SOFTNET-S7

S5-compatible communication (SEND/RECEIVE based on the FDL interface) with SOFTNET-DP or SOFTNET-S7

CP5611 applies to the following software:
STEP7 V.52 and above
SOFTNET-S7
SOFTNET-DP
SOFTNET-DP slave
COM PROFIVUS V3.3 and above
STEP 7-Micro/WIN V3.1 and above
ProTool, ProToo/Pro
NCMPC

Technical specifications of communication card CP5611:

Transmission rate:9.6Kbps~12Mbps, corresponding maximum communication distance conforms to PROFIBUS standard
Interface: PROFIBUS/MPI/PPI, isolated 9-pin Sub-D socket
Isolation Voltage: 1000VDC
RS485 port with anti-lightning and anti-surging protector, repeatability surge capacity: Ipp = 100A (10/700us, 4KV)
Standard: ITU-TK20/21, VDE 0433. ± 15KV ESD (ESD) protection
Over-current protection: RS485 interface can withstand up to 60V voltage caused by the sustained over-current
PG/PC connection: PCI2.1 standard slot
Standard voltage: +5 VDC
Power: 2.0W
Operating temperature: 0 ~ + 70 'C
Size (width x high) (mm): 102 x 130
Weight: 100g

We also have other compatible PLC Programming cables of Siemens

CP5611

CP5611-A2

CP5512

USB/PPIM+

PC/PPI

PC/PPI+

PC/MPI

PC/TTY

Here, more pictures of our compatible cables of Siemens parts

Of course, we also supply some other brands compatible PLC Programming cables, such as Mitsubishi/OMRON/Panasonic/GE/Fuji/Schneider/Allen-Bradley/Delta/Proface…

FX-USB-AW

SC-09+

SC-10