Jun 6
2013
SIEMENS SIMATIC SM7-200 DIGITAL MODULE 6ES7223-1BH22-0XA0 EM223 8 DI/ 8 DO 24V DC
SIEMENS SIMATIC SM7-200 DIGITAL MODULE 6ES7223-1BH22-0XA0 EM223 8 DI/ 8 DO 24V DC
6ES7223-1BH22-0XA0 SIMATIC S7-200, DIGITAL I/O
SIMATIC S7-200, DIGITAL I/O EM 223, FOR S7-22X CPU ONLY, 8 DI DC 24 V, SINK/SOURCE, 8 DO DC 24V, 0.75A/POINT SOURCE
Please find below data sheet of Siemens original 6ES7223-1BH22-0XA0
|
- |
SIMATIC S7-200, DIGITAL I/O EM 223, FOR S7-22X CPU ONLY, 8 DI DC 24 V, SINK/SOURCE, 8 DO DC 24V, 0.75A/POINT SOURCE
|
|
| Supply voltage | ||
| Load voltage L+ | ||
| Rated value (DC) | 24 V | |
| permissible range, lower limit (DC) | 20.4 V | |
| permissible range, upper limit (DC) | 28.8 V | |
| Input current | ||
| from backplane bus 5 V DC, max. | 80 mA | |
| Power losses | ||
| Power loss, typ. | 3 W | |
| Digital inputs | ||
| Number/binary inputs | 8 | |
| Input voltage | ||
| Type of input voltage | DC | |
| Rated value, DC | 24 V | |
| for signal “0″ | 0 to 5 V | |
| for signal “1″ | 15 to 30 VDC | |
| Input current | ||
| for signal “1″, typ. | 4 mA | |
| Input delay (for rated value of input voltage) | ||
| for standard inputs | ||
| at “0″ to “1″, max. | 4.5 ms | |
| Digital outputs | ||
| Number/binary outputs | 8 | |
| Functionality/short-circuit strength | No; to be provided externally | |
| Limitation of inductive shutdown voltage to | L+ (-48 V) | |
| Output voltage | ||
| for signal “0″, max. | 0.1 V | |
| for signal “1″, min. | 20 V | |
| Output current | ||
| for signal “1″ rated value | 750 mA | |
| Aggregate current of outputs (per group) | ||
| all mounting positions | ||
| maximum current per conductor/group | 3 A | |
| Relay outputs | ||
| Switching capacity of contacts | ||
| with inductive load, max. | 0.75 A; each output | |
| on lamp load, max. | 5 W | |
| Switching frequency/contacts/at ohmic load/maximum | 0.75 A; each output | |
| Cable length | ||
| Cable length, shielded, max. | 500 m | |
| Cable length unshielded, max. | 150 m | |
| Encoder | ||
| Connectable encoders | ||
| 2-wire sensor | Yes | |
| Permissible quiescent current (2-wire sensor), max. | 1 mA | |
| Galvanic isolation | ||
| Galvanic isolation digital inputs | ||
| Galvanic isolation digital inputs | Yes; Optocoupler | |
| between the channels, in groups of | 4 | |
| Galvanic isolation digital outputs | ||
| Galvanic isolation digital outputs | Yes; Optocoupler | |
| between the channels, in groups of | 4 | |
| Isolation | ||
| Isolation checked with | 500 V AC | |
| Connection method | ||
| Plug-in I/O terminals | Yes | |
| Dimensions | ||
| Width | 71.2 mm | |
| Height | 80 mm | |
| Depth | 62 mm | |
| Weight | ||
| Weight, approx. | 200 g | |
Our company have the compatible cable, named 223-1BH22-0XA0, can replace Siemens 6ES7 223-1BH22-0XA0.You can have a look on the picture.
You can get it only need USD78.00/pc. Buy now ====> 
You can get it only need USD78.00/pc. Buy now ====>
It’s tested before shippment.Not made by Siemens,OEM product as the replacement.
The quality is guaranteed, we have 1 year warranty for our compatible products.
Please check below discriptions of our compatible OEM 223-1BH22-0XA0
|
Technical specifications |
|
|
Power consumption |
|
|
·From +5V DC backplane bus |
80mA |
| ·Power loss | 3W |
| Number of digital contact | 8 |
| Rated voltage | 24V 4mA |
| ·for “0”signal | 0~5V DC |
| ·for “1”signal | 15~30V DC |
| Input delay(Max) | 4.5ms |
| Signal input type | PNP/NPN |
| Isolation tested for contact | 500VAC,1Min |
| Cable length(shielded) | 500m |
| Cable length(unshielded) | 300m |
|
Number of digital contact |
8 |
|
Output type |
Transistor |
|
Isolation tested for contact |
Optocoupler |
|
Rated voltage |
24 VDC |
|
Voltage range |
20.4~28.8VDC |
|
Rated voltage |
0.75A |
|
Lamp load |
5W |
|
Cable length(shielded) |
500m |
|
Cable length(unshielded) |
150m |
|
Dimensions(W x H x D)(mm) |
71.2×80×62 |
|
weight |
145g |
|
Wiring Diagram |
|
|
|
|
Feel free to contact us for any problem.
Recent Comments