Profibus Connector

May 25 2013

SIEMENS SIMATIC SM7-300 ANALOG MODULE SM331 6ES7331-7PF01-0AB0 8 AI，RTD

SIEMENS SIMATIC SM7-300 ANALOG MODULE SM331 6ES7331-7PF01-0AB0 8 AI，RTD

6ES7331-7PF01-0AB0 SIMATIC S7-300, ANALOG INPUT

SIMATIC S7-300, ANALOG INPUT SM 331, OPT. ISOL.,2/3/4 WIRE, 8AI, RESISTANCE, PT100/200/1000 NI100/120/200/500/1000, CU10, PLUS CHARACTERISTICS ACCORDING TO GOST STANDARD 16 (INTERN 24) BIT, 50MS, 1 X 40 PIN

Please find below data sheet of Siemens original 6ES7331-7PF01-0AB0:

Our company have the compatible cable, named 331-7PF01-0AB0, can replace Siemens 6ES7 331-7PF01-0AB0.

You can have a look on the picture.

You can get it only need USD440.00/pc. Buy now ====>

It’s tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Here, below is the discription of our compatible OEM 331-7PF01-0AB0:

Model	SM331 8AI RTD
Product Description	8AI; RTD temperature measurement modules; stable
Power consumption
·Rate value	24V DC
·From backplane bus current consumption	50mA
·From L+	40mA
·Power loss	1W
The power of transmitter
·Supply current	/
·short-circuit protection	/
Number of analog inputs	8
Cable Length (Shielded)	Max:200m
Input type and input range
·voltage	/
·current(4wire)	/
·current(2wire)	/
·tesistance	150Ω, 300Ω, 600Ω,
·thermocouple	/
·RTD	Pt10、 Pt50、Pt100, Pt200、 Pt500、 Pt1000、 Ni100、 Ni120 、Ni200,Ni500 、 Ni1000 、Cu10(9.035) 、 Cu50、Cu100
A/D resolution	16bits
Basic conversion time(per channel)	190ms
Interference frequency suppression	400/50/60Hz
Tolerance(Over entire temperature range)
·Voltage	/
·Current	/
·resistance	±0.1%
·temperature	±1℃
Interrupts
Diagnostic interrupt	Per group Yes,Configurable
Limit-value interrupt	Yes,Configurable
Isolation tested for contact
·Between channels	Yes
·Between channels and backplane bu	Yes
Front connector	40-pin
Dimensions(W x H x D)(mm)	40×125×120
Order Number	331-7PF01-0AB0

Any question, please feel free to contact us.

Permalink | Categories SM7-300 ANALOG MODULE on May 25, 2013 by nancy | No Comments

May 24 2013

SIEMENS SIMATIC SM7-300 ANALOG MODULE SM331 6ES7331-7KF02-0AB0 8AI, 9/12/14BIT

SIEMENS SIMATIC SM7-300 ANALOG MODULE SM331 6ES7331-7KF02-0AB0 8AI, 9/12/14BIT

6ES7331-7KF02-0AB0 SM331, 8AI, 9/12/14BIT

SIMATIC S7-300, ANALOG INPUT SM 331, OPTICALLY ISOLATED, 8AI, RESOLUTION 9/12/14 BITS, U/I/THERMOCOUPLE/RESISTANCE INTERRUPT, DIAGNOSTICS; 1X20PIN REMOVE/INSERT W. BACKPLANE BUS

Please find below data sheet of Siemens original 6ES7331-7KF02-0AB0:

-

SIMATIC S7-300, ANALOG INPUT SM 331, OPTICALLY ISOLATED, 8AI, RESOLUTION 9/12/14 BITS, U/I/THERMOCOUPLE/RESISTANCE INTERRUPT, DIAGNOSTICS; 1X20PIN REMOVE/INSERT W. BACKPLANE BUS

Supply voltage

Load voltage L+

Rated value (DC)

24 V

Reverse polarity protection

Yes

Input current

from load voltage L+ (without load), max.

200 mA

from backplane bus 5 V DC, max.

50 mA

Power losses

Power loss, typ.

1 W

Analog inputs

Number of analog inputs

8

Number of analog inputs for resistance measurement

4

permissible input voltage for voltage input (destruction limit), max.

20 V; continuous; 75 V for max. 1 s (mark to space ratio 1:20)

permissible input current for current input (destruction limit), max.

40 mA

Input ranges

Voltage

Yes

Current

Yes

Thermocouple

Yes

Resistance thermometer

Yes

Resistance

Yes

Input ranges (rated values), voltages

0 to +10 V

No

1 to 5 V

Yes

Input resistance (1 to 5 V)

100 kΩ

1 to 10 V

No

-1 V to +1 V

Yes

Input resistance (-1 V to +1 V)

10 MΩ

-10 V to +10 V

Yes

Input resistance (-10 V to +10 V)

100 kΩ

-2.5 V to +2.5 V

Yes

Input resistance (-2.5 V to +2.5 V)

100 kΩ

-250 mV to +250 mV

Yes

Input resistance (-250 mV to +250 mV)

10 MΩ

-5 V to +5 V

Yes

Input resistance (-5 V to +5 V)

100 kΩ

-50 mV to +50 mV

No

-500 mV to +500 mV

Yes

Input resistance (-500 mV to +500 mV)

10 MΩ

-80 mV to +80 mV

Yes

Input resistance (-80 mV to +80 mV)

10 MΩ

Input ranges (rated values), currents

0 to 20 mA

Yes

Input resistance (0 to 20 mA)

25 Ω

-10 to +10 mA

Yes

Input resistance (-10 to +10 mA)

25 Ω

-20 to +20 mA

Yes

Input resistance (-20 to +20 mA)

25 Ω

-3.2 to +3.2 mA

Yes

Input resistance (-3.2 to +3.2 mA)

25 Ω

4 to 20 mA

Yes

Input resistance (4 to 20 mA)

25 Ω

Input ranges (rated values), thermoelements

Type B

No

Type E

Yes

Input resistance (Type E)

10 MΩ

Type J

Yes

Input resistance (type J)

10 MΩ

Type K

Yes

Input resistance (Type K)

10 MΩ

Type L

Yes

Input resistance (Type L)

10 MΩ

Type N

Yes

Input resistance (Type N)

10 MΩ

Type R

No

Type S

No

Type T

No

Type U

No

Type TXK/TXK(L) to GOST

No

Input ranges (rated values), resistance thermometers

Cu 10

No

Ni 100

Yes; Standard

Input resistance (Ni 100)

10 MΩ

Ni 1000

No

LG-Ni 1000

No

Ni 120

No

Ni 200

No

Ni 500

No

Pt 100

Yes; Standard

Input resistance (Pt 100)

10 MΩ

Pt 1000

No

Pt 200

No

Pt 500

No

Input ranges (rated values), resistors

0 to 150 ohms

Yes

Input resistance (0 to 150 ohms)

10 MΩ

0 to 300 ohms

Yes

Input resistance (0 to 300 ohms)

10 MΩ

0 to 600 ohms

Yes

Input resistance (0 to 600 ohms)

10 MΩ

0 to 6000 ohms

No

Thermocouple (TC)

for thermocouples

Type E, J, K, L, N

Temperature compensation

Parameterizable

Yes

internal temperature compensation

Yes

external temperature compensation with compensations socket

Yes

Resistance thermometer (RTD)

Characteristic linearization

for resistance thermometer

Pt100 (standard, climatic range), Ni100 (standard, climatic range)

Characteristic linearization

Parameterizable

Yes

Cable length

Cable length, shielded, max.

200 m; 50 m at 80 mV and thermocouples

Analog value creation

Measurement principle

integrating

Integrations and conversion time/ resolution per channel

Resolution with overrange (bit including sign), max.

15 bit; Unipolar: 9/12/12/14 bits; bipolar: 9 bits + sign/12 bits + sign/12 bits + sign/14 bits + sign

Integration time, parameterizable

Yes; 2.5/ 16.67/ 20/ 100 ms

Basic conversion time, ms

3 / 17 / 22 /102 ms

Interference voltage suppression for interference frequency f1 in Hz

400 / 60 / 50 / 10 Hz

Encoder

Connection of signal encoders

for current measurement as 2-wire transducer

Yes

for current measurement as 4-wire transducer

Yes

for resistance measurement with 2-conductor connection

Yes

for resistance measurement with 3-conductor connection

Yes

for resistance measurement with 4-conductor connection

Yes

Errors/accuracies

Operational limit in overall temperature range

Voltage, relative to input area

+/- 1 %; +/-1% (80 mV); +/-0.6% (250 to 1000 mV); +/-0.8% (2.5 to 10 V)

Current, relative to input area

+/- 0,7 %; From 3.2 to 20 mA

Impedance, relative to input area

+/- 0,7 %; 150, 300, 600 Ohm

Resistance-type thermometer, relative to input area

+/- 0,7 %; +/-0.7% (Pt100/ Ni100); +/-0.8% (Pt100 climate)

Basic error limit (operational limit at 25 °C)

Voltage, relative to input area

+/- 0,6 %; +/-0.4% (250 to 1000 mV); +/-0.6 % (2.5 to 10 mV); +/-0.7 % (80 mV)

Current, relative to input area

+/- 0,5 %; 3.2 to 20 mA

Impedance, relative to input area

+/- 0,5 %; 150, 300, 600 Ohm

Resistance-type thermometer, relative to input area

+/- 0,6 %; +/-0.5% (Pt100/ Ni100); +/-0.6% (Pt100 climate)

Isochronous mode

Isochronous operation (application synchronized up to terminal)

No

Interrupts/diagnostics/status information

Alarms

Diagnostic alarm

Yes; Parameterizable, channels 0 and 2

Limit value alarm

Yes; Parameterizable

Diagnostic messages

Diagnostic functions

Yes; Parameterizable

Diagnostic information readable

Yes

Diagnostics

Yes

Diagnostics indication LED

Group error SF (red)

Yes

Galvanic isolation

Galvanic isolation analog inputs

between the channels

No

between the channels and the backplane bus

Yes

Isolation

Isolation checked with

500 V DC

Connection method

required front connector

20-pin

Dimensions

Width

40 mm

Height

125 mm

Depth

120 mm

Weight

Weight, approx.

250 g

Our company have the compatible cable, named 331-7KF02-0AB0, can replace Siemens 6ES7331-7KF02-0AB0.

You can have a look on the picture.

You can get it only need USD367.00/pc. Buy now ====>

It’s tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Below discriptions of our compatible OEM product 331-7KF02-0AB0:

Model	SM331 8AI
Product Description	8AI; Full-function temperature measurement modules; Resolution:16bits; Short-circuit protection ;High immunity;stable
Power consumption
·Rate value	24V DC
·From backplane bus current consumption	100mA
·From L+	25mA
·Power loss	1W
The power of transmitter
·Supply current	Per channel (Max):60mA
·short-circuit protection	Yes
Number of analog inputs	8
Cable Length (Shielded)	200m Max.For 80mV:50m
Input type and input range
·voltage	±80mV, ±250mV, ±500mV,±1V, ±2.5V ±5V,1~5V, ±10V
·current(4wire)	±3.2mA, ±10mA, ±20mA, 4~20mA
·current(2wire)	4~20mA
·tesistance	600Ω, 300Ω, 150Ω,
·thermocouple	K,J,N,E,L
·RTD	Pt100,Ni100
A/D resolution	16bits
Basic conversion time(per channel)	0.5ms/12.5ms/25ms/50ms
Interference frequency suppression	400/60/50/10Hz
Tolerance(Over entire temperature range)
·Voltage	±0.6%
·Current	±0.6%
·resistance	±0.6%
·temperature	±1℃
Interrupts
Diagnostic interrupt	Per group Yes,Configurable
Limit-value interrupt	Yes,Configurable
Isolation tested for contact
·Between channels	None
·Between channels and backplane bu	Yes
Front connector	20-pin
Dimensions(W x H x D)(mm)	40×125×120
Order Number	331-7KF02-0AB0

Any question, please feel free to contact us.

Permalink | Categories SM7-300 ANALOG MODULE on May 24, 2013 by nancy | 8 Comments

May 23 2013

SIEMENS SIMATIC SM7-300 ANALOG MODULE SM331 6ES7331-1KF01-0AB0 8AI, 13BIT

SIEMENS SIMATIC SM7-300 ANALOG MODULE SM331 6ES7331-1KF01-0AB0 8AI, 13BIT

6ES7331-1KF01-0AB0 SM331, 8AI, 13BIT

SIMATIC S7-300, ANALOG INPUT SM 331, OPTICALLY ISOLATED, 8 AI, 13 BIT RESOLUTION, U/I/RESISTANCE/PT100, NI100, NI1000, LG-NI1000, 66 MS MODULE UPDATE, 1 X 40 PIN

Here, below is the data sheet of Siemens original 6ES7331-1KF01-0AB0 :

	SIMATIC S7-300, ANALOG INPUT SM 331, OPTICALLY ISOLATED, 8 AI, 13 BIT RESOLUTION, U/I/RESISTANCE/PT100, NI100, NI1000, LG-NI1000, 66 MS MODULE UPDATE, 1 X 40 PIN

Input current
from backplane bus 5 V DC, max.	90 mA
Power losses
Power loss, typ.	0.4 W
Analog inputs
Number of analog inputs	8
Number of analog inputs for resistance measurement	8
permissible input voltage for voltage input (destruction limit), max.	30 V; 12 V continuous, 30 V for max. 1 s
permissible input current for current input (destruction limit), max.	40 mA
Input ranges
Voltage	Yes
Current	Yes
Thermocouple	No
Resistance thermometer	Yes
Resistance	Yes
Input ranges (rated values), voltages
0 to +10 V	Yes
Input resistance (0 to 10 V)	100 kΩ
1 to 5 V	Yes
Input resistance (1 to 5 V)	100 kΩ
1 to 10 V	No
-1 V to +1 V	Yes
Input resistance (-1 V to +1 V)	100 kΩ
-10 V to +10 V	Yes
Input resistance (-10 V to +10 V)	100 kΩ
-2.5 V to +2.5 V	No
-250 mV to +250 mV	No
-5 V to +5 V	Yes
Input resistance (-5 V to +5 V)	100 kΩ
-50 mV to +50 mV	Yes
Input resistance (-50 mV to +50 mV)	100 kΩ
-500 mV to +500 mV	Yes
Input resistance (-500 mV to +500 mV)	100 kΩ
-80 mV to +80 mV	No
Input ranges (rated values), currents
0 to 20 mA	Yes
Input resistance (0 to 20 mA)	50 Ω
-10 to +10 mA	No
-20 to +20 mA	Yes
Input resistance (-20 to +20 mA)	50 Ω
-3.2 to +3.2 mA	No
4 to 20 mA	Yes
Input resistance (4 to 20 mA)	50 Ω
Input ranges (rated values), thermoelements
Type B	No
Type E	No
Type J	No
Type K	No
Type L	No
Type N	No
Type R	No
Type S	No
Type T	No
Type U	No
Type TXK/TXK(L) to GOST	No
Input ranges (rated values), resistance thermometers
Cu 10	No
Ni 100	Yes; Standard/climate
Input resistance (Ni 100)	100 MΩ
Ni 1000	Yes
Input resistance (Ni 1000)	100 MΩ
LG-Ni 1000	Yes; Standard/climate
Input resistance (LG-Ni 1000)	100 MΩ
Ni 120	No
Ni 200	No
Ni 500	No
Pt 100	Yes; Standard/climate
Input resistance (Pt 100)	100 MΩ
Pt 1000	No
Pt 200	No
Pt 500	No
Input ranges (rated values), resistors
0 to 150 ohms	No
0 to 300 ohms	No
0 to 600 ohms	Yes
Input resistance (0 to 600 ohms)	100 MΩ
0 to 6000 ohms	Yes
Input resistance (0 to 6000 ohms)	100 MΩ
Resistance thermometer (RTD)
Characteristic linearization
for resistance thermometer	yes; Pt100 standard/air con.; Ni100 standard/air con.; Ni1000 standard/air con.; LG-Ni1000 standard/air con.
Characteristic linearization
Parameterizable	Yes
Cable length
Cable length, shielded, max.	200 m; max. 50 m at 50 mV
Analog value creation
Measurement principle	integrating
Integrations and conversion time/ resolution per channel
Resolution with overrange (bit including sign), max.	13 bit
Integration time, parameterizable	Yes; 60 / 50 ms
Basic conversion time, ms	66 / 55 ms
Interference voltage suppression for interference frequency f1 in Hz	50 / 60 Hz
Encoder
Connection of signal encoders
for current measurement as 2-wire transducer	Yes; with external supply
for current measurement as 4-wire transducer	Yes
for resistance measurement with 2-conductor connection	Yes
for resistance measurement with 3-conductor connection	Yes
for resistance measurement with 4-conductor connection	Yes
Errors/accuracies
Operational limit in overall temperature range
Voltage, relative to input area	+/- 0,6 %; +/-0.6% (+/-5 V, 10 V, 1 to 5 V, 0 to 10 V); +/-0.5% (+/-50 mV, 500 mV, 1 V)
Current, relative to input area	+/- 0,5 %; +/-20 mA, 0 to 20 mA, 4 to 20 mA
Impedance, relative to input area	+/- 0,5 %; 0 to 6 kohms, 0 to 600 kohms
Resistance-type thermometer, relative to input area	1 Kelvin (Pt100, Ni100, climatic; Ni1000, LG-Ni1000, standard; Ni1000, LG-Ni1000, climatic); 1.2 Kelvin (Pt100, Ni100, standard)
Basic error limit (operational limit at 25 °C)
Voltage, relative to input area	+/- 0,4 %; 0.4% (+/-5 V, 10 V, 1 to 5 V, 0 to 10 V); 0.3% (+/-50 mV, 500 mV, 1 V)
Current, relative to input area	+/- 0,3 %; +/-20 mA, 0 to 20 mA, 4 to 20 mA
Impedance, relative to input area	+/- 0,3 %; 0 to 6 kohms, 0 to 600 kohms
Resistance-type thermometer, relative to input area	1 Kelvin (Pt100, Ni100, standard); 0.8 Kelvin (Pt100, Ni100, climatic; Ni1000, LG-Ni1000, standard; Ni1000, LG-Ni1000, climatic)
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No
Interrupts/diagnostics/status information
Alarms
Diagnostic alarm	No
Limit value alarm	No
Diagnostic messages
Diagnostic functions	No
Diagnostic information readable	No
Diagnostics	No
Group error	No
Diagnostics indication LED
Group error SF (red)	No
Galvanic isolation
Galvanic isolation analog inputs
between the channels	No
between the channels and the backplane bus	Yes
Isolation
Isolation checked with	500 V DC
Connection method
required front connector	40-pin
Dimensions
Width	40 mm
Height	125 mm
Depth	117 mm
Weight
Weight, approx.	250 g

Our company have the compatible cable, named 331-1KF01-0AB0, can replace Siemens 6ES7331-1KF01-0AB0.You can have a look on the picture.

You can get it only need USD251.00/pc. Buy now ====>

It’s tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Please find below discription of our compatible 331-1KF01-0AB0:

Model	SM331 8AI
Product Description	8AI;voltage/current/RTD temperature measurement modules;Resolution:13bits Optical isolation; high immunity;stable
Power consumption
·Rate value	/
·From backplane bus current consumption	90mA
·From L+	/
·Power loss	0.4W
The power of transmitter
·Supply current	/
·short-circuit protection	/
Number of analog inputs	8
Cable Length (Shielded)	Max:200m
Input type and input range
·voltage	1~5V,0~10V,±50mV±500mV, ±1V, ±5V, ±10V
·current(4wire)	±20mA, 0~20mA, 4~20mA
·current(2wire)	/
·tesistance	600Ω,6KΩ
·thermocouple	/
·RTD	Pt100(-200℃-850℃)
A/D resolution	13bits
Basic conversion time(per channel)	66/55ms
Interference frequency suppression	50/60Hz
Tolerance(Over entire temperature range)
·Voltage	±0.6%
·Current	±0.6%
·resistance	±0.6%
·temperature	±1℃
Interrupts
Diagnostic interrupt	None
Limit-value interrupt	None
Isolation tested for contact
·Between channels	None
·Between channels and backplane bu	Yes
Front connector	40-pin
Dimensions(W x H x D)(mm)	40×125×120
Order Number	331-1KF01-0AB0

Please contact me for any question.

Permalink | Categories SM7-300 ANALOG MODULE on May 23, 2013 by nancy | 9 Comments

May 22 2013

SIEMENS SIMATIC SM7-300 DIGITAL MODULE SM323 6ES7 323-1BL00-0AA0 16DI 24V DC/ 16DO 24V DC

SIEMENS SIMATIC SM7-300 DIGITAL MODULE SM323 6ES7 323-1BL00-0AA0 16DI 24V DC/ 16DO 24V DC

6ES7323-1BL00-0AA0 SM323, 16DI/DO, DC24V, 0,5A

SIMATIC S7-300, DIGITAL MODULE SM 323, OPTICALLY ISOLATED, 16 DI AND 16 DO, 24V DC, 0.5A, AGGREGATE CURRENT 4A, 1X40 PIN

Here, please find below data sheet of Siemens original 6ES7 323-1BL00-0AA0:

-

SIMATIC S7-300, DIGITAL MODULE SM 323, OPTICALLY ISOLATED, 16 DI AND 16 DO, 24V DC, 0.5A, AGGREGATE CURRENT 4A, 1X40 PIN

Supply voltage

Load voltage L+

Rated value (DC)

24 V

permissible range, lower limit (DC)

20.4 V

permissible range, upper limit (DC)

28.8 V

Input current

from load voltage L+ (without load), max.

80 mA

from backplane bus 5 V DC, max.

80 mA

Power losses

Power loss, typ.

6.5 W

Digital inputs

Number/binary inputs

16

Input characteristic curve acc. to IEC 61131, Type 1

Yes

Number of simultaneously controllable inputs

all mounting positions

up to 40 °C, max.

16

up to 60 °C, max.

8

Input voltage

Type of input voltage

DC

Rated value, DC

24 V

for signal “0″

-30 to +5 V

for signal “1″

13 to 30 V

Input current

for signal “1″, typ.

7 mA

Input delay (for rated value of input voltage)

for standard inputs

at “0″ to “1″, min.

1.2 ms

at “0″ to “1″, max.

4.8 ms

at “1″ to “0″, min.

1.2 ms

at “1″ to “0″, max.

4.8 ms

Cable length

Cable length, shielded, max.

1000 m

Cable length unshielded, max.

600 m

Digital outputs

Number/binary outputs

16

Functionality/short-circuit strength

Yes; Electronic

Response threshold, typ.

1 A

Limitation of inductive shutdown voltage to

L+ (-48 V)

Lamp load, max.

5 W

Controlling a digital input

Yes

Load resistance range

lower limit

48 Ω

upper limit

4 kΩ

Output voltage

for signal “1″, min.

L+ (-0.8 V)

Output current

for signal “1″ rated value

0.5 A

for signal “1″ permissible range for 0 to 60 °C, min.

5 mA

for signal “1″ permissible range for 0 to 60 °C, max.

0.6 A

for signal “1″ minimum load current

5 mA

for signal “0″ residual current, max.

0.5 mA

Output delay with resistive load

“0″ to “1″, max.

100 µs

“1″ to “0″, max.

500 µs

Parallel switching of 2 outputs

for increased power

No

for redundant control of a load

Yes; only outputs of the same group

Switching frequency

with resistive load, max.

100 Hz

with inductive load, max.

0.5 Hz

on lamp load, max.

100 Hz

Aggregate current of outputs (per group)

horizontal installation

up to 40 °C, max.

4 A

up to 60 °C, max.

3 A

Cable length

Cable length, shielded, max.

1000 m

Cable length unshielded, max.

600 m

Encoder

Connectable encoders

2-wire sensor

Yes

Permissible quiescent current (2-wire sensor), max.

1.5 mA

Isochronous mode

Isochronous operation (application synchronized up to terminal)

No

Interrupts/diagnostics/status information

Alarms

No

Diagnostic messages

Diagnostic functions

No

Diagnostics indication LED

Status indicator digital output (green)

Yes

Status indicator digital input (green)

Yes

Galvanic isolation

Galvanic isolation digital inputs

between the channels

Yes

between the channels, in groups of

16

between the channels and the backplane bus

Yes; Optocoupler

Galvanic isolation digital outputs

between the channels

Yes

between the channels, in groups of

8

between the channels and the backplane bus

Yes; Optocoupler

Permissible potential difference

between different circuits

75 VDC / 60 VAC

Isolation

Isolation checked with

500 V DC

Connection method

required front connector

40-pin

Dimensions

Width

40 mm

Height

125 mm

Depth

120 mm

Weight

Weight, approx.

260 g

Our company have the compatible cable, named 323-1BL00-0AA0, can replace Siemens 6ES7 323-1BL00-0AA0.You can have a look on the picture.

You can get it only need USD247.00/pc. Buy now ====>

It’s tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Please find below discription of our compatible OEM 323-1BL00-0AA0:

Model	SM323 inputs/outputs:16
Product Description	16DI,24VDC/16DO, 24 VDC; Transistor;Optical isolation with high immunity.
Power consumption
·From backplane bus current consumption	80mA
·Power loss	6.5W
Input Feature
Number of digital inputs	16
Input voltage
·Rate value	24V DC
·For ”0” signal	-30~5V DC
·For ”1” signal	13~30V DC
Input current	7mA
Input delay
·From “0” to “1”,Min	1.2~4.8ms
·From “1” to “0”,Min	1.2~4.8ms
Input type	NPN
Connection of 2-wire BERO sensor	Yes
Permissible quiescent current	1.5mA
Output Feature
Number of digital outputs	16
Short-circuit protection	Yes,Electronic
Inductive cutoff voltage	L+(-53V)
Lamp load.Max	5W
Output voltage:for ”1” signal	Min:L+(-53V)
Output current:for ”1” signal	0.5A
Isolation tested for contact
·Between channels and backplane bus	Yes
·Per group between channels	Yes
Cable Length (Shielded)	1,000m
Cable Length (unshielded)	600m
The status indicates	Green LED each channel
Front connector	40-pin
Dimensions(W x H x D)(mm)	40×125×120
Order Number	323-1BL00-0AA0

Please feel free to contact me for any question.

Permalink | Categories SM7-300 DIGITAL MODULE on May 22, 2013 by nancy | 2 Comments

May 21 2013

SIEMENS SIMATIC SM7-300 DIGITAL MODULE SM322 6ES7 322-1BL00-0AA0 32 DO 24V DC

SIEMENS SIMATIC SM7-300 DIGITAL MODULE SM322 6ES7 322-1BL00-0AA0 32 DO 24V DC

6ES7322-1BL00-0AA0 SM322, 32DO 24V DC, 0,5A

SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED, 32DO, 24V DC, 0.5A, 1 X 40 PIN, SUM OF OUTPUT CURRENTS 4A/GROUP (16A/MODULE)

Please find below data sheet of Siemens original 6ES7 322-1BL00-0AA0:

-

SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED, 32DO, 24V DC, 0.5A, 1 X 40 PIN, SUM OF OUTPUT CURRENTS 4A/GROUP (16A/MODULE)

Supply voltage

Load voltage L+

Rated value (DC)

24 V

permissible range, lower limit (DC)

20.4 V

permissible range, upper limit (DC)

28.8 V

Input current

from load voltage L+ (without load), max.

160 mA

from backplane bus 5 V DC, max.

110 mA

Power losses

Power loss, typ.

6.6 W

Digital outputs

Number/binary outputs

32

Limitation of inductive shutdown voltage to

L+ (-53 V)

Lamp load, max.

5 W

Load resistance range

lower limit

48 Ω

upper limit

4 kΩ

Output voltage

for signal “1″, min.

L+ (-0.8 V)

Output current

for signal “1″ rated value

0.5 A

for signal “1″ permissible range for 0 to 40 °C, max.

0.6 A

for signal “1″ minimum load current

5 mA

for signal “0″ residual current, max.

0.5 mA

Switching frequency

with resistive load, max.

100 Hz

with inductive load, max.

0.5 Hz

on lamp load, max.

10 Hz

Aggregate current of outputs (per group)

horizontal installation

up to 40 °C, max.

4 A

up to 60 °C, max.

3 A

vertical installation

up to 40 °C, max.

2 A

Cable length

Cable length, shielded, max.

1000 m

Cable length unshielded, max.

600 m

Interrupts/diagnostics/status information

Alarms

Diagnostic alarm

No

Diagnostic messages

Diagnostics

No

Wire break

No

Short circuit

No

Missing load voltage

No

Diagnostics indication LED

Rated load voltage PWR (green)

No

Fuse OK FSG (green)

No

Galvanic isolation

Galvanic isolation digital outputs

between the channels, in groups of

8

between the channels and the backplane bus

Yes; Optocoupler

Isolation

Isolation checked with

500 V DC

Connection method

required front connector

40-pin

Dimensions

Width

40 mm

Height

125 mm

Depth

120 mm

Weight

Weight, approx.

260 g

Our company have the compatible cable, named 322-1BL00-0AA0 , can replace Siemens 6ES7 322-1BL00-0AA0 .You can have a look on the picture.

You can get it only need USD264.00/pc. Buy now ====>

It’s tested before shippment.Not made by Siemens,OEM product as the replacement.The quality is guaranteed, we have 1 year warranty for our compatible products.

Please find below discription of our compatible 322-1BL00-0AA0:

Model	SM322 Number of digital outputs:32
Product Description	32DO,24V DC; Transistor;Optical isolation with high immunity
Power consumption
·From bus current consumption	90mA
·Power loss	6W
Number of digital outputs	32
Cable Length (Shielded)	1,000m
Cable Length (unshielded)	600m
Short-circuit protection	Yes,Electronic
Inductive cutoff voltage	L+(-53V)
Lamp load Max	5W
Output voltage:”1” signal	Min,L+(-0.8V)
Output current:”1” signal	0.5A
Lifetime contact mechanical	/
Lifetime contact mechanical rated load voltage)	/
Sum of output currents(per group)	4A
IIsolation tested for contact
·To backplane bus	Yes,Optocoupler
·To per group between channels	Yes
Switching frequency for contacts
·Resistive loads,Max	100Hz
·Capacitive loads,Max	0.5Hz
·Lamp loads,Max	10Hz
·Mechanical load,Max	/
The status indicates	Green LED each channel
Front connector	40-pin
Dimensions(W x H x D)(mm)	40×125×120
Order Number	322-1BL00-0AA0

Please feel free to contact us if you have any question.

Permalink | Categories SM7-300 DIGITAL MODULE on May 21, 2013 by nancy | No Comments

May 20 2013

SIEMENS SIMATIC SM7-300 DIGITAL MODULE SM322 6ES7 322-1HH01-0AA0 16 DO 24 VDC

SIEMENS SIMATIC SM7-300 DIGITAL MODULE SM322 6ES7 322-1HH01-0AA0 16 DO 24 VDC

6ES7322-1HH01-0AA0 SM322, 16DO RELAY

SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED 16DO, RELAY CONTACTS, 1 X 20 PIN

Below is the data sheet of Siemens original 6ES7322-1HH01-0AA0:

-

SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED 16DO, RELAY CONTACTS, 1 X 20 PIN

Supply voltage

Load voltage L+

Rated value (DC)

120 V

Load voltage L1

Rated value (AC)

230 V

Input current

from backplane bus 5 V DC, max.

100 mA

Power losses

Power loss, typ.

4.5 W

Digital outputs

Number/binary outputs

16; Relay

Lamp load, max.

50 W; 230 V AC

Output current

for signal “1″ rated value

2 A

for signal “1″ minimum load current

10 mA

Switching frequency

with resistive load, max.

1 Hz

with inductive load, max.

0.5 Hz

on lamp load, max.

1 Hz

mechanical, max.

10 Hz

Aggregate current of outputs (per group)

horizontal installation

up to 60 °C, max.

8 A

vertical installation

up to 40 °C, max.

8 A

Relay outputs

Rated input voltage of relay coil L+ (DC)

24 V

Number of operating cycles, max.

100000; 50000 (24 V DC, at 2 A); 700000 (120 V AC, at 2 A); 100000 (230 V AC, at 2 A)

Switching capacity of contacts

with inductive load, max.

2 A; 2 A (230 V AC), 2 A (24 V DC)

Switching frequency/contacts/at ohmic load/maximum

2 A; 2 A (230 V AC), 2 A (24 V DC)

Cable length

Cable length, shielded, max.

1000 m

Cable length unshielded, max.

600 m

Interrupts/diagnostics/status information

Alarms

Diagnostic alarm

No

Diagnostic messages

Diagnostics

No

Wire break

No

Short circuit

No

Fuse blown

No

Missing load voltage

No

Diagnostics indication LED

Rated load voltage PWR (green)

No

Fuse OK FSG (green)

No

Galvanic isolation

Galvanic isolation digital outputs

between the channels, in groups of

8

between the channels and the backplane bus

Yes; Optocoupler

Isolation

Isolation checked with

1500 V AC

Connection method

required front connector

20-pin

Dimensions

Width

40 mm

Height

125 mm

Depth

120 mm

Weight

Weight, approx.

250 g

Our company have the compatible cable, named 322-1HH01-0AA0, can replace Siemens 6ES7 322-1HH01-0AA0.You can have a look on the picture.

You can get it only need USD197/pc. Buy now ====>

It’s tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Please read below data sheet of our compatible OEM 322-1HH01-0AA0:

Model	SM322 Number of digital outputs:16
Product Description	16DO,24V DC;Relay;Optical isolation with high immunity
Power consumption
·From bus current consumption	100mA
·Power loss	4.5W
Number of digital outputs	16, Relay
Cable Length (Shielded)	1,000m
Cable Length (unshielded)	600m
Short-circuit protection	/
Inductive cutoff voltage	/
Lamp load Max	200W
Output voltage:”1” signal	/
Output current:”1” signal	2A
Lifetime contact mechanical	1,000,000
Lifetime contact mechanical rated load voltage)	100,000
Sum of output currents(per group)	8A
IIsolation tested for contact
·To backplane bus	Yes,Optocoupler
·To per group between channels	Yes
Switching frequency for contacts
·Resistive loads,Max	1Hz
·Capacitive loads,Max	0.5Hz
·Lamp loads,Max	1Hz
·Mechanical load,Max	10Hz
The status indicates	Green LED each channel
Front connector	20-pin
Dimensions(W x H x D)(mm)	40×125×120
Order Number	322-1HH01-0AA0

Any question, please feel free to contact me.

Permalink | Categories SM7-300 DIGITAL MODULE on May 20, 2013 by nancy | 4 Comments

May 19 2013

SIEMENS SIMATIC SM7-300 DIGITAL MODULE SM322 6ES7322-1BH01-0AA0 16DO 24V DC

SIEMENS SIMATIC SM7-300 DIGITAL MODULE SM322 6ES7322-1BH01-0AA0 16DO 24V DC

6ES7322-1BH01-0AA0 SM322, 16DO 24V DC, 0,5A

SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED, 16 DO, 24V DC, 0.5A, 1 X 20 PIN SUM OF OUTPUT CURRENTS 4A/GROUP (8A/MODULE)

Please check below data sheet of Siemens original 6ES7322-1BH01-0AA0

-

SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED, 16 DO, 24V DC, 0.5A, 1 X 20 PIN SUM OF OUTPUT CURRENTS 4A/GROUP (8A/MODULE)

Supply voltage

Load voltage L+

Rated value (DC)

24 V

permissible range, lower limit (DC)

20.4 V

permissible range, upper limit (DC)

28.8 V

Input current

from load voltage L+ (without load), max.

80 mA

from backplane bus 5 V DC, max.

80 mA

Power losses

Power loss, typ.

4.9 W

Digital outputs

Number/binary outputs

16

Limitation of inductive shutdown voltage to

L+ (-53 V)

Lamp load, max.

5 W

Load resistance range

lower limit

48 Ω

upper limit

4 kΩ

Output voltage

for signal “1″, min.

L+ (-0.8 V)

Output current

for signal “1″ rated value

0.5 A

for signal “1″ permissible range for 0 to 40 °C, max.

0.6 A

for signal “1″ minimum load current

5 mA

for signal “0″ residual current, max.

0.5 mA

Switching frequency

with resistive load, max.

100 Hz

with inductive load, max.

0.5 Hz

on lamp load, max.

10 Hz

Aggregate current of outputs (per group)

horizontal installation

up to 40 °C, max.

4 A

up to 60 °C, max.

3 A

vertical installation

up to 40 °C, max.

2 A

Cable length

Cable length, shielded, max.

1000 m

Cable length unshielded, max.

600 m

Interrupts/diagnostics/status information

Alarms

Diagnostic alarm

No

Diagnostic messages

Diagnostics

No

Wire break

No

Short circuit

No

Fuse blown

No

Missing load voltage

No

Diagnostics indication LED

Rated load voltage PWR (green)

No

Fuse OK FSG (green)

No

Galvanic isolation

Galvanic isolation digital outputs

between the channels, in groups of

8

between the channels and the backplane bus

Yes; Optocoupler

Isolation

Isolation checked with

500 V DC

Connection method

required front connector

20-pin

Dimensions

Width

40 mm

Height

125 mm

Depth

120 mm

Weight

Weight, approx.

190 g

Our company have the compatible cable, named 322-1BH01-0AA0, can replace Siemens 6ES7 322-1BH01-0AA0.

You can have a look on the picture.

You can get it only need USD132.00/pc. Buy now ====>

It’s tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Please check below descriptions of our OEM 322-1BH01-0AA0:

Technical specifications
Power consumption
·From backplane bus	80mA
·Power loss	4.9W

Number of digital contact	16
Cable length: shielded	1,000m
Cable length: unshielded	600m
Short-circuit protection	Yes,Electronic
Inductive cutoff voltage	L+(-53V)

Lamp load Max.	5W
Output voltage “1”signal	Min. L + (-0.8V)
Output current “1”signal	0.5A
Sum of output currents(per group)	4A


Service life of contacts
·Mechanical
·At rated load voltage
Isolation tested for contact
·To backplane bus	Optocoupler
·Per group between channelsSwitching Frequency of contacts	Yes
·Resistive loads,Max	100Hz
·Capacitive loads,Max	0.5Hz
·Lamp loads,Max	10Hz
·Mechanical load,Max
The status indicates	Green LED each channel
Frontconnestor	20-Pin

Dimensions(W x H x D)(mm)	40×125×120
weight	210g
Wiring Diagram

Any question, please feel free to contact me.

Permalink | Categories SM7-300 DIGITAL MODULE on May 19, 2013 by nancy | No Comments

May 18 2013

SIEMENS SIMATIC SM7-300 DIGITAL MODULE 6ES7322-1BF01-0AA0, SM322, 8DO, 24V DC, 2A

SIEMENS SIMATIC SM7-300 DIGITAL MODULE 6ES7322-1BF01-0AA0 SM322, 8DO, 24V DC, 2A

6ES7322-1BF01-0AA0 SM322, 8DO, 24V DC, 2A

SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED, 8 DO, 24V DC, 2A, 1 X 20 PIN

Below is the data sheet of Siemens original product 6ES7322-1BF01-0AA0:

-

SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED, 8 DO, 24V DC, 2A, 1 X 20 PIN

Supply voltage

Load voltage L+

Rated value (DC)

24 V

permissible range, lower limit (DC)

20.4 V

permissible range, upper limit (DC)

28.8 V

Input current

from load voltage L+ (without load), max.

60 mA

from backplane bus 5 V DC, max.

40 mA

Power losses

Power loss, typ.

6.8 W

Digital outputs

Number/binary outputs

8

Limitation of inductive shutdown voltage to

L+ (-48 V)

Lamp load, max.

10 W

Load resistance range

lower limit

12 Ω

upper limit

4 kΩ

Output voltage

for signal “1″, min.

L+ (-0.8 V)

Output current

for signal “1″ rated value

2 A

for signal “1″ permissible range for 0 to 40 °C, max.

2.4 A

for signal “1″ minimum load current

5 mA

for signal “0″ residual current, max.

0.5 mA

Switching frequency

with resistive load, max.

100 Hz

with inductive load, max.

0.5 Hz

on lamp load, max.

10 Hz

Aggregate current of outputs (per group)

horizontal installation

up to 40 °C, max.

4 A

up to 60 °C, max.

4 A

vertical installation

up to 40 °C, max.

4 A

Cable length

Cable length, shielded, max.

1000 m

Cable length unshielded, max.

600 m

Interrupts/diagnostics/status information

Alarms

Diagnostic alarm

No

Diagnostic messages

Diagnostics

No

Wire break

No

Short circuit

No

Fuse blown

No

Missing load voltage

No

Diagnostics indication LED

Rated load voltage PWR (green)

No

Fuse OK FSG (green)

No

Galvanic isolation

Galvanic isolation digital outputs

between the channels, in groups of

4

between the channels and the backplane bus

Yes; Optocoupler

Isolation

Isolation checked with

500 V DC

Connection method

required front connector

20-pin

Dimensions

Width

40 mm

Height

125 mm

Depth

120 mm

Weight

Weight, approx.

190 g

Our company have the compatible cable, named 322-1BF01-0AA0, can replace Siemens 6ES7 322-1BF01-0AA0.You can have a look on the picture.

You can get it only need USD114.00/pc. Buy now ====>

It’s tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Below description of our OEM 322-1BF01-0AA0 for your reference:

Model	SM322 Number of digital outputs:8
Product Description	8DO,24V DC;Transistor;Optical isolation with high immunity
Power consumption
·From bus current consumption	50mA
·Power loss	6.8W
Number of digital outputs	8
Cable Length (Shielded)	1,000m
Cable Length (unshielded)	600m
Short-circuit protection	Yes,Electronic
Inductive cutoff voltage	L+(-48V)
Lamp load Max	10W
Output voltage:”1” signal	Min,L+(-0.8V)
Output current:”1” signal	2A
Lifetime contact mechanical	/
Lifetime contact mechanical rated load voltage)	/
Sum of output currents(per group)	4A
IIsolation tested for contact
·To backplane bus	Yes,Optocoupler
·To per group between channels	Yes
Switching frequency for contacts
·Resistive loads,Max	100Hz
·Capacitive loads,Max	0.5Hz
·Lamp loads,Max	10Hz
·Mechanical load,Max	/
The status indicates	Green LED each channel
Front connector	20-pin
Dimensions(W x H x D)(mm)	40×125×120
Order Number	322-1BF01-0AA0

Any question, please feel free to contact.

Permalink | Categories SM7-300 DIGITAL MODULE on May 18, 2013 by nancy | No Comments

May 17 2013

SIEMENS SIMATIC SM7-300 DIGITAL MODULE SM 321: 6ES7321-1BL00-0AA0 32DI, DC24V

SIEMENS SIMATIC SM7-300 DIGITAL MODULE SM 321: 6ES7321-1BL00-0AA0 32DI, DC24V

6ES7321-1BL00-0AA0 SM321, 32DI, DC24V

SIMATIC S7-300, DIGITAL INPUT SM 321, OPTICALLY ISOLATED 32DI, 24 V DC, 1 X 40 PIN

Please check below data sheet of Siemens original 6ES7321-1BL00-0AA0 :

-

SIMATIC S7-300, DIGITAL INPUT SM 321, OPTICALLY ISOLATED 32DI, 24 V DC, 1 X 40 PIN

Supply voltage

Load voltage L+

Rated value (DC)

24 V

permissible range, lower limit (DC)

20.4 V

permissible range, upper limit (DC)

28.8 V

Input current

from backplane bus 5 V DC, max.

15 mA

Power losses

Power loss, typ.

6.5 W

Digital inputs

Number/binary inputs

32

Input characteristic curve acc. to IEC 61131, Type 1

Yes

Number of simultaneously controllable inputs

horizontal installation

up to 40 °C, max.

32

up to 60 °C, max.

16

vertical installation

up to 40 °C, max.

32

Input voltage

Type of input voltage

DC

Rated value, DC

24 V

for signal “0″

-30 to +5 V

for signal “1″

13 to 30 V

Input current

for signal “1″, typ.

7 mA

Input delay (for rated value of input voltage)

for standard inputs

Parameterizable

No

at “0″ to “1″, min.

1.2 ms

at “0″ to “1″, max.

4.8 ms

Cable length

Cable length, shielded, max.

1000 m

Cable length unshielded, max.

600 m

Encoder

Connectable encoders

2-wire sensor

Yes

Permissible quiescent current (2-wire sensor), max.

1.5 mA

Isochronous mode

Isochronous operation (application synchronized up to terminal)

No

Interrupts/diagnostics/status information

Alarms

No

Diagnostic alarm

No

Hardware interrupt

No

Diagnostic messages

Diagnostic functions

No

Diagnostics indication LED

Status indicator digital input (green)

Yes

Galvanic isolation

Galvanic isolation digital inputs

between the channels

No

between the channels, in groups of

16

between the channels and the backplane bus

Yes; Optocoupler

Permissible potential difference

between different circuits

75 VDC / 60 VAC

Isolation

Isolation checked with

500 V DC

Connection method

required front connector

40-pin

Dimensions

Width

40 mm

Height

125 mm

Depth

120 mm

Weight

Weight, approx.

260 g

Our company have the compatible cable, named 321-1BL00-0AA0, can replace Siemens 6ES7321-1BL00-0AA0.

Please find its picture:

You can get it only need USD191.00/pc. Buy now ====>
It’s tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Here, please find its description of our OEM product:

Model	SM321 Number of digital inputs:32
Product Description	32DI 24V DC, High immunity
Power consumption
·From bus current consumption	50mA
·Power loss	6.5W
Number of digital inputs	32
Cable Length (Shielded)	1,000m
Cable Length (unshielded)	600m
Input voltage
·Rate value	24V DC
·For ”0” signal	-30~5V DC
·For ”1” signal	13~30V DC
·Frequency range	/
Input current	7mA
Input delay
·From “0” to “1”,Min	1.2~4.8ms
·From “1” to “0”,Min	1.2~4.8ms
Front connector	40-pin
Input type	NPN
Connection of 2-wire BERO sensor	Yes
Permissible quiescent current	1.5mA
Isolation tested for contact
·Between channel and backplane bus	Yes
·Per group between channels	Yes
The status indicates	Green LED each channel
Dimensions(WxHx D)(mm)	40×125×120
Order Number	321-1BL00-0AA0

Any question, please feel free to contact us.

Permalink | Categories SM7-300 DIGITAL MODULE on May 17, 2013 by nancy | 4 Comments

May 16 2013

SIEMENS SIMATIC SM7-300 DIGITAL MODULE SM 321, 6ES7321-1BH02-0AA0, SM321, 16DI, DC24V

SIEMENS SIMATIC SM7-300 DIGITAL MODULE SM 321, 6ES7321-1BH02-0AA0, SM321, 16DI, DC24V

6ES7321-1BH02-0AA0 SM321, 16DI, DC24V

SIMATIC S7-300, DIGITAL INPUT SM 321, OPTICALLY ISOLATED, 16DI, 24 V DC, 1 X 20 PIN

Here, below is the data sheet of Siemens original 6ES7321-1BH02-0AA0:

-

SIMATIC S7-300, DIGITAL INPUT SM 321, OPTICALLY ISOLATED, 16DI, 24 V DC, 1 X 20 PIN

Supply voltage

Load voltage L+

Rated value (DC)

24 V

permissible range, lower limit (DC)

20.4 V

permissible range, upper limit (DC)

28.8 V

Input current

from backplane bus 5 V DC, max.

10 mA

Power losses

Power loss, typ.

3.5 W

Digital inputs

Number/binary inputs

16

Input characteristic curve acc. to IEC 61131, Type 1

Yes

Number of simultaneously controllable inputs

horizontal installation

up to 40 °C, max.

16

up to 60 °C, max.

16

vertical installation

up to 40 °C, max.

16

Input voltage

Type of input voltage

DC

Rated value, DC

24 V

for signal “0″

-30 to +5 V

for signal “1″

13 to 30 V

Input current

for signal “1″, typ.

7 mA

Input delay (for rated value of input voltage)

for standard inputs

Parameterizable

No

at “0″ to “1″, min.

1.2 ms

at “0″ to “1″, max.

4.8 ms

Cable length

Cable length, shielded, max.

1000 m

Cable length unshielded, max.

600 m

Encoder

Connectable encoders

2-wire sensor

Yes

Permissible quiescent current (2-wire sensor), max.

1.5 mA

Isochronous mode

Isochronous operation (application synchronized up to terminal)

No

Interrupts/diagnostics/status information

Alarms

No

Diagnostic alarm

No

Hardware interrupt

No

Diagnostic messages

Diagnostic functions

No

Diagnostics indication LED

Status indicator digital input (green)

Yes

Galvanic isolation

Galvanic isolation digital inputs

between the channels

No

between the channels, in groups of

16

between the channels and the backplane bus

Yes; Optocoupler

Permissible potential difference

between different circuits

75 VDC / 60 VAC

Isolation

Isolation checked with

500 V DC

Connection method

required front connector

20-pin

Dimensions

Width

40 mm

Height

125 mm

Depth

120 mm

Weight

Weight, approx.

200 g

Our company have the compatible cable, named 321-1BH02-0AA0, can replace Siemens 6ES7321-1BH02-0AA0.Please check its picture:

You can get it only need USD95.00/pc. Buy now ====>
It’s tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Please find below descriptions of our OEM 321-1BH02-0AA0:

Model	SM321 Number of digital inputs:16
Product Description	16DI,24V DC;High immunity;stable
Power consumption
·From bus current consumption	17mA
·Power loss	3.5W
Number of digital inputs	16
Cable Length (Shielded)	1,000m
Cable Length (unshielded)	600m
Input voltage
·Rate value	24V DC
·For ”0” signal	-30~5V DC
·For ”1” signal	13~30V DC
·Frequency range	/
Input current	7mA
Input delay
·From “0” to “1”,Min	1.2~4.8ms
·From “1” to “0”,Min	1.2~4.8ms
Front connector	20-pin
Input type	NPN
Connection of 2-wire BERO sensor	Yes
Permissible quiescent current	1.5mA
Isolation tested for contact
·Between channel and backplane bus	Yes
·Per group between channels	Yes
The status indicates	Green LED each channel
Dimensions(WxHx D)(mm)	40×125×120
Order Number	321-1BH02-0AA0

Any question, please feel free to contact us.

Permalink | Categories SM7-300 DIGITAL MODULE on May 16, 2013 by nancy | No Comments

Profibus Connector

SIEMENS SIMATIC SM7-300 ANALOG MODULE SM331 6ES7331-7PF01-0AB0 8 AI，RTD

SIEMENS SIMATIC SM7-300 ANALOG MODULE SM331 6ES7331-7KF02-0AB0 8AI, 9/12/14BIT

SIEMENS SIMATIC SM7-300 ANALOG MODULE SM331 6ES7331-1KF01-0AB0 8AI, 13BIT

SIEMENS SIMATIC SM7-300 DIGITAL MODULE SM323 6ES7 323-1BL00-0AA0 16DI 24V DC/ 16DO 24V DC

SIEMENS SIMATIC SM7-300 DIGITAL MODULE SM322 6ES7 322-1BL00-0AA0 32 DO 24V DC

SIEMENS SIMATIC SM7-300 DIGITAL MODULE SM322 6ES7 322-1HH01-0AA0 16 DO 24 VDC

SIEMENS SIMATIC SM7-300 DIGITAL MODULE SM322 6ES7322-1BH01-0AA0 16DO 24V DC

SIEMENS SIMATIC SM7-300 DIGITAL MODULE 6ES7322-1BF01-0AA0, SM322, 8DO, 24V DC, 2A

SIEMENS SIMATIC SM7-300 DIGITAL MODULE SM 321: 6ES7321-1BL00-0AA0 32DI, DC24V

SIEMENS SIMATIC SM7-300 DIGITAL MODULE SM 321, 6ES7321-1BH02-0AA0, SM321, 16DI, DC24V

Recent Posts

Categories

Recent Comments

Archives