Siemens 6ES7322-1BH01-0AA0 DIGITAL MODULE
↵
↵
↵
↵Introduction to 6ES7322-1BH01-0AA0
Supply voltage | |
Load voltage L+ | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 20.4 V |
permissible range, upper limit (DC) | 28.8 V |
Input current | |
from load voltage L+ (without load), max. | 80 mA |
from backplane bus 5 V DC, max. | 80 mA |
Power losses | |
Power loss, typ. | 4.9 W |
Digital outputs | |
Number of digital outputs | 16 |
Limitation of inductive shutdown voltage to | L+ (-53 V) |
Switching capacity of the outputs | |
Lamp load, max. | 5 W |
Load resistance range | |
lower limit | 48 Ω |
upper limit | 4 kΩ |
Output voltage | |
for signal "1", min. | L+ (-0.8 V) |
Output current | |
for signal "1" rated value | 0.5 A |
for signal "1" permissible range for 0 to 40 °C, max. | 0.6 A |
for signal "1" minimum load current | 5 mA |
for signal "0" residual current, max. | 0.5 mA |
Switching frequency | |
with resistive load, max. | 100 Hz |
with inductive load, max. | 0.5 Hz |
on lamp load, max. | 10 Hz |
Aggregate current of outputs (per group) | |
horizontal installation | |
up to 40 °C, max. | 4 A |
up to 60 °C, max. | 3 A |
vertical installation | |
up to 40 °C, max. | 2 A |
Cable length | |
Cable length, shielded, max. | 1000 m |
Cable length unshielded, max. | 600 m |
Interrupts/diagnostics/status information | |
Alarms | |
Diagnostic alarm | No |
Diagnostic messages | |
Diagnostics | No |
Wire break | No |
Short circuit | No |
Fuse blown | No |
Missing load voltage | No |
Diagnostics indication LED | |
Rated load voltage PWR (green) | No |
Fuse OK FSG (green) | No |
Galvanic isolation | |
Galvanic isolation digital outputs | |
between the channels, in groups of | 8 |
between the channels and the backplane bus | Yes; Optocoupler |
Isolation | |
Isolation checked with | 500 V DC |
Connection method | |
required front connector | 20-pin |
Dimensions | |
Width | 40 mm |
Height | 125 mm |
Depth | 120 mm |
Weights | |
Weight, approx. |
190 g |
System User's Manual PDF of S7-300 digital & analog modules:
S7-300 Modules data & USER'S MANUAL
Our company (Kollewin Technology CO., Limited) have a new product,
named 322-1BH01-0AA0,
it is 100% compatible with Siemens original part.
Part#: 322-1BH01-0AA0
Unit price:USD132.00/pc
Description: S7-300 Digital module
Manufacturer: Kollewin
Approx. Weight: 0.3 Kg
Warranty: 1 year
Origin: China
Here, you also need 1 piece of 20pin front connector to connect with it.
Our compatible 6ES7 392-1AJ00-0AA0 can meet your requirements.
6ES7 392-1AJ00-0AA0 @USD10.50/pc
It's tested before shippment.Not made by Siemens,OEM product as the replacement.
The quality is guaranteed, we have 1 year warranty for our compatible products.
Technical specifications |
|
Power consumption |
|
·From backplane bus |
80mA |
·Power loss |
4.9W |
|
|
Number of digital contact |
16 |
Cable length: shielded |
1,000m |
Cable length: unshielded |
600m |
Short-circuit protection |
Yes,Electronic |
Inductive cutoff voltage |
L+(-53V) |
|
|
Lamp load Max. |
5W |
Output voltage “1”signal |
Min. L + (-0.8V) |
Output current “1”signal |
0.5A |
Sum of output currents(per group) |
4A |
|
|
Service life of contacts |
|
·Mechanical |
|
·At rated load voltage |
|
Isolation tested for contact |
|
·To backplane bus |
Optocoupler |
·Per group between channels Switching Frequency of contacts |
Yes |
·Resistive loads,Max |
100Hz |
·Capacitive loads,Max |
0.5Hz |
·Lamp loads,Max |
10Hz |
·Mechanical load,Max |
|
The status indicates |
Green LED each channel |
Frontconnestor |
20-Pin |
|
|
Dimensions(W x H x D)(mm) |
40×125×120 |
weight |
210g |
Wiring Diagram |
More compatible Siemens S7-200/300 modules we can offer:
Model | Product Description |
SM7-200 DIGITAL MODULE | |
6ES7221-1BH22-0XA0 | EM221 16 DI 24V DC |
6ES7221-1BL22-0XA0 | EM221 32 DI 24V DC |
6ES7222-1BF22-0XA0 | EM222 8DO,DC 24V |
6ES7222-1HF22-0XA0 | EM222 8DO,relay |
6ES7222-1BH22-0XA0 | EM222 16 DO 24V DC |
6ES7222-1HH22-0XA0 | EM222 16 DO RELAY |
6ES7222-1BL22-0XA0 | EM222 32 DO 24V DC |
6ES7223-1HF22-0XA0 | EM223 4DI/4DO,DC 24V relay |
6ES7223-1BH22-0XA0 | EM223 8 DI/ 8 DO 24V DC |
6ES7223-1PH22-0XA0 | EM223 8 DI 24V DC/8 DO RELAY |
6ES7223-1BL22-0XA0 | EM223 16 DI/ 16 DO 24V DC |
6ES7223-1PL22-0XA0 | EM223 16 DI 24V DC/ 16 DO RELAY |
6ES7223-1BF22-0XA0 | 4 DI/4DO,24 VDC |
6ES7221-1BF22-0XA0 | 8 DI,24V DC |
SM7-200 ANALOG MODULE | |
6ES7231-0HC22-0XA0 | EM231 4 AI x 12 Bits |
6ES7231-0HF22-0XA0 | EM231 8 AI x 12/11 BIT |
6ES7231-7PC22-0XA0 | EM231 4 RTD |
6ES7231-7PD22-0XA0 | EM231 4 TC |
6ES7231-7PH22-0XA0 | EM231 8 TC |
6ES7231-7PL22-0XA0 | 16AI, T/C INPUT MOD, 16BIT |
6ES7231-7PB22-0XA0 | 2AI, RTD INPUT MOD. 16BIT |
6ES7232-0HB22-0XA0 | EM232 2 AO x 12 Bits |
6ES7232-0HD22-0XA0 | EM232 4 AO x 12 Bits |
6ES7235-0KD22-0XA0 | EM235 4 AI/ 1 AO x 12 Bits |
SM7-300 DIGITAL MODULE | |
6ES7321-1BH02-0AA0 | SM321 16 DI 24 VDC |
6ES7321-1FH00-0AA0 | SM321 16 DI AC 230V |
6ES7321-1BL00-0AA0 | SM321 32 DI 24 VDC |
6ES7322-1BF01-0AA0 | SM322,8DO,24VDC,2A |
6ES7322-1BH01-0AA0 | SM322 16 DO 24 VDC/ 0.5A |
6ES7322-1HH01-0AA0 | SM322 16 DO RELAY |
6ES7322-1BL00-0AA0 | SM322 32 DO 24V DC/0.5A |
6ES7323-1BL00-0AA0 | SM323 16DI 24V DC/ 16DO 24V DC 0.5A |
SM7-300 ANALOG MODULE | |
6ES7331-1KF01-0AB0 | SM331 8 AI x 13 Bits |
6ES7331-7KF02-0AB0 | SM331 8 AI X 14 Bits |
6ES7331-7PF01-0AB0 | SM331 8 AI,RTD |
6ES7331-7PF11-0AB0 | SM331 8 AI,TC |
6ES7332-5HD01-0AB0 | SM332 4 AO x 12 Bits |
6ES7332-5HF00-0AB0 | SM 332 8 AO x 12 BITS |
SIMATIC DP IM 153 | |
6ES7153-1AA03-0XB0 |
SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES |
6ES7365-0BA01-0AA0 | IM 365 Rack expansion module,be deployed with a central controller and a expansion rack |
More pictures for your reference:
Please feel free to contact me for any question!
Contact person: Miss Nancy
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com
Recent Comments