May 22 2013

SIEMENS SIMATIC SM7-300 DIGITAL MODULE SM323 6ES7 323-1BL00-0AA0 16DI 24V DC/ 16DO 24V DC

SIEMENS SIMATIC  SM7-300 DIGITAL MODULE SM323  6ES7  323-1BL00-0AA0  16DI 24V DC/ 16DO 24V DC

6ES7323-1BL00-0AA0                 SM323, 16DI/DO, DC24V, 0,5A
SIMATIC S7-300, DIGITAL MODULE SM 323, OPTICALLY ISOLATED, 16 DI AND 16 DO, 24V DC, 0.5A, AGGREGATE CURRENT 4A, 1X40 PIN
Here, please find below data sheet of Siemens original 6ES7 323-1BL00-0AA0:
SM 323 digital input/output module

-

SIMATIC S7-300, DIGITAL MODULE SM 323, OPTICALLY ISOLATED, 16 DI AND 16 DO, 24V DC, 0.5A, AGGREGATE CURRENT 4A, 1X40 PIN
Supply voltage
Load voltage L+
Rated value (DC) 24 V
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Input current
from load voltage L+ (without load), max. 80 mA
from backplane bus 5 V DC, max. 80 mA
Power losses
Power loss, typ. 6.5 W
Digital inputs
Number/binary inputs 16
Input characteristic curve acc. to IEC 61131, Type 1 Yes
Number of simultaneously controllable inputs
all mounting positions
up to 40 °C, max. 16
up to 60 °C, max. 8
Input voltage
Type of input voltage DC
Rated value, DC 24 V
for signal “0″ -30 to +5 V
for signal “1″ 13 to 30 V
Input current
for signal “1″, typ. 7 mA
Input delay (for rated value of input voltage)
for standard inputs
at “0″ to “1″, min. 1.2 ms
at “0″ to “1″, max. 4.8 ms
at “1″ to “0″, min. 1.2 ms
at “1″ to “0″, max. 4.8 ms
Cable length
Cable length, shielded, max. 1000 m
Cable length unshielded, max. 600 m
Digital outputs
Number/binary outputs 16
Functionality/short-circuit strength Yes; Electronic
Response threshold, typ. 1 A
Limitation of inductive shutdown voltage to L+ (-48 V)
Lamp load, max. 5 W
Controlling a digital input Yes
Load resistance range
lower limit 48 Ω
upper limit 4 kΩ
Output voltage
for signal “1″, min. L+ (-0.8 V)
Output current
for signal “1″ rated value 0.5 A
for signal “1″ permissible range for 0 to 60 °C, min. 5 mA
for signal “1″ permissible range for 0 to 60 °C, max. 0.6 A
for signal “1″ minimum load current 5 mA
for signal “0″ residual current, max. 0.5 mA
Output delay with resistive load
“0″ to “1″, max. 100 µs
“1″ to “0″, max. 500 µs
Parallel switching of 2 outputs
for increased power No
for redundant control of a load Yes; only outputs of the same group
Switching frequency
with resistive load, max. 100 Hz
with inductive load, max. 0.5 Hz
on lamp load, max. 100 Hz
Aggregate current of outputs (per group)
horizontal installation
up to 40 °C, max. 4 A
up to 60 °C, max. 3 A
Cable length
Cable length, shielded, max. 1000 m
Cable length unshielded, max. 600 m
Encoder
Connectable encoders
2-wire sensor Yes
Permissible quiescent current (2-wire sensor), max. 1.5 mA
Isochronous mode
Isochronous operation (application synchronized up to terminal) No
Interrupts/diagnostics/status information
Alarms
Alarms No
Diagnostic messages
Diagnostic functions No
Diagnostics indication LED
Status indicator digital output (green) Yes
Status indicator digital input (green) Yes
Galvanic isolation
Galvanic isolation digital inputs
between the channels Yes
between the channels, in groups of 16
between the channels and the backplane bus Yes; Optocoupler
Galvanic isolation digital outputs
between the channels Yes
between the channels, in groups of 8
between the channels and the backplane bus Yes; Optocoupler
Permissible potential difference
between different circuits 75 VDC / 60 VAC
Isolation
Isolation checked with 500 V DC
Connection method
required front connector 40-pin
Dimensions
Width 40 mm
Height 125 mm
Depth 120 mm
Weight
Weight, approx. 260 g
Our company have the compatible cable, named 323-1BL00-0AA0,  can replace Siemens 6ES7 323-1BL00-0AA0.You can have a look on the picture.323-1BL00-0AA0 (1)

You can get it only need USD247.00/pc.    Buy now ====>  buy buttom

It’s tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Please find below discription of our compatible OEM 323-1BL00-0AA0:

Model

SM323

inputs/outputs:16

Product  Description 16DI,24VDC/16DO, 24 VDC; Transistor;Optical isolation with high immunity.
Power consumption
·From backplane bus current consumption 80mA
·Power loss 6.5W
Input Feature
Number of digital inputs 16
Input voltage
·Rate value 24V DC
·For ”0” signal -30~5V DC
·For ”1” signal 13~30V DC
Input current 7mA
Input delay
·From “0”  to “1”,Min 1.2~4.8ms
·From “1”  to “0”,Min 1.2~4.8ms
Input type NPN
Connection of 2-wire BERO sensor Yes
Permissible quiescent current 1.5mA
Output Feature
Number of digital outputs 16
Short-circuit protection Yes,Electronic
Inductive cutoff voltage L+(-53V)
Lamp load.Max 5W
Output voltage:for ”1” signal Min:L+(-53V)
Output current:for ”1” signal 0.5A
Isolation tested for contact
·Between channels and backplane bus Yes
·Per group between channels Yes
Cable Length (Shielded) 1,000m
Cable Length (unshielded) 600m
The status indicates Green LED each channel
Front connector 40-pin
Dimensions(W x H x D)(mm) 40×125×120
Order Number  323-1BL00-0AA0

 

 

Please feel free to contact me for any question.

Leave a Reply