Profibus Connector

SIEMENS SIMATIC SM7-300 DIGITAL MODULE SM322 6ES7322-1BH01-0AA0 16DO 24V DC

-	SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED, 16 DO, 24V DC, 0.5A, 1 X 20 PIN SUM OF OUTPUT CURRENTS 4A/GROUP (8A/MODULE)
Supply voltage
Load voltage L+
Rated value (DC)	24 V
permissible range, lower limit (DC)	20.4 V
permissible range, upper limit (DC)	28.8 V
Input current
from load voltage L+ (without load), max.	80 mA
from backplane bus 5 V DC, max.	80 mA
Power losses
Power loss, typ.	4.9 W
Digital outputs
Number/binary outputs	16
Limitation of inductive shutdown voltage to	L+ (-53 V)
Lamp load, max.	5 W
Load resistance range
lower limit	48 Ω
upper limit	4 kΩ
Output voltage
for signal “1″, min.	L+ (-0.8 V)
Output current
for signal “1″ rated value	0.5 A
for signal “1″ permissible range for 0 to 40 °C, max.	0.6 A
for signal “1″ minimum load current	5 mA
for signal “0″ residual current, max.	0.5 mA
Switching frequency
with resistive load, max.	100 Hz
with inductive load, max.	0.5 Hz
on lamp load, max.	10 Hz
Aggregate current of outputs (per group)
horizontal installation
up to 40 °C, max.	4 A
up to 60 °C, max.	3 A
vertical installation
up to 40 °C, max.	2 A
Cable length
Cable length, shielded, max.	1000 m
Cable length unshielded, max.	600 m
Interrupts/diagnostics/status information
Alarms
Diagnostic alarm	No
Diagnostic messages
Diagnostics	No
Wire break	No
Short circuit	No
Fuse blown	No
Missing load voltage	No
Diagnostics indication LED
Rated load voltage PWR (green)	No
Fuse OK FSG (green)	No
Galvanic isolation
Galvanic isolation digital outputs
between the channels, in groups of	8
between the channels and the backplane bus	Yes; Optocoupler
Isolation
Isolation checked with	500 V DC
Connection method
required front connector	20-pin
Dimensions
Width	40 mm
Height	125 mm
Depth	120 mm
Weight
Weight, approx.	190 g

Our company have the compatible cable, named 322-1BH01-0AA0,  can replace Siemens 6ES7 322-1BH01-0AA0.

You can have a look on the picture.

You can get it only need USD132.00/pc.    Buy now ====> 

It’s tested before shippment.Not made by Siemens,OEM product as the replacement.

The quality is guaranteed, we have 1 year warranty for our compatible products.

Please check below descriptions of our OEM 322-1BH01-0AA0:

Technical specifications
Power consumption
·From backplane bus	80mA
·Power loss	4.9W
Number of digital contact	16
Cable length: shielded	1,000m
Cable length: unshielded	600m
Short-circuit protection	Yes,Electronic
Inductive cutoff voltage	L+(-53V)
Lamp load Max.	5W
Output  voltage  “1”signal	Min. L + (-0.8V)
Output  current  “1”signal	0.5A
Sum of output currents(per group)	4A
Service life of contacts
·Mechanical
·At rated load voltage
Isolation tested for contact
·To backplane bus	Optocoupler
·Per group between channelsSwitching Frequency of contacts	Yes
·Resistive loads,Max	100Hz
·Capacitive loads,Max	0.5Hz
·Lamp loads,Max	10Hz
·Mechanical load,Max
The status indicates	Green LED each channel
Frontconnestor	20-Pin
Dimensions(W x H x D)(mm)	40×125×120
weight	210g
Wiring Diagram

Any question, please feel free to contact me.