Profibus Connector

Siemens 6 GK1 561-1AA00/6 GK1 561-1AA01 communication card CP5611

Siemens 6 GK1 561-1AA00/6 GK1 561-1AA01 communication card CP5611

We have CP5611, which can replace Siemens original 6 GK1 561-1AA00.

Now you can get it only need USD199.00/pc.      Purchase it right now.

Here, pls read its manual. CP5611 Card introduction

As you know, Siemens original card 6 GK1 561-1AA00 has been replaced by 6 GK1 561-1AA01.

Of course, we also have a new product can replace it, it’s named CP5611-A2.

The ex-work price is USD259.00/pc, purchase it right now.

Here, pls find its manual: IN_CP5611A2_74

For any question or wholesale purchase, pls contact me:

Contact Person: Miss Nancy
Skype: kollewin
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8005
Fax: +86-0755-26898905-8008
Website: www.kollewin.com

Below is the data sheet of Siemens original 6 GK1 561-1AA01.

Product-type designation	CP 5611 A2
	COMMUNICATION PROCESSOR CP 5611 A2 PCI-CARD (32 BIT; 3.3/5V;33/ 66 MHZ) FOR CONNECTION TO PG OR PC WITH PCI-BUS TO PROFIBUS OR MPI (NO WIN9X-SUPPORT!) CURRENTLY ONLY 32BIT SUPPORT IN CONNECTION WITH SIMATIC NET V8.2 SW!
Transmission rate
Transmission rate
at interface 1 / in accordance with PROFIBUS
minimum	9.6 kbit/s
maximum	12 Mbit/s
Interfaces
Number of electrical connections / at interface 1 / in accordance with PROFIBUS	1
Design of electrical connection / at interface 1 / in accordance with PROFIBUS	9-pin Sub-D socket (RS 485)
Supply voltage, current consumption, power loss
Type of voltage	DC
Supply voltage
1 / from backplane bus	5 V
Relative symmetrical tolerance
at 5 V / with DC	5 %
Consumed current
1 / from backplane bus / with DC / maximum	0.5 A
Resistive loss	2.5 W
Permitted ambient conditions
Ambient temperature
during operating	5…55 °C
during storage	-20…+60 °C
during transport	-20…+60 °C
Relative humidity
at 25 °C / without condensation / during operating / maximum	95 %
Protection class IP	IP00
Design, dimensions and weight
Width	18 mm
Height	102 mm
Depth	130 mm
Net weight	100 g
Product properties, functions, components / general
Number of plug-in cards in the same design / can be plugged in / per PC station	1
Number of modules / note	-
Number of possible connections / for open communication / by means of SEND/RECEIVE / maximum	50
Software / for DP master function / required	Yes, SOFTNET-PB DP
Service / as DP master
DPV0	Yes
DPV1	Yes
DPV2	No
Number of DP slaves / on DP master / usable	64
Amount of data
of the address area of the inputs / as DP master / overall	14640 byte
of the address area of the outputs / as DP master / overall	14640 byte
of the address area of the inputs / per DP slave	244 byte
of the address area of the outputs / per DP slave	244 byte
of the address area of the diagnostic data / per DP slave	244 byte
Service / as DP slave
DPV0	Yes
DPV1	No
Amount of data
of the address area of the inputs / as DP slave / overall	122 byte
of the address area of the outputs / as DP slave / overall	122 byte
Number of possible connections / for S7/PG communication / maximum	8
Number of configurable connections / per PC station	207
Configuration software / required	NCM PC is included in scope of delivery of the required software product
Product function / Port diagnostics	Yes
Standards, specifications, approvals
Standard
for EMC	89/336/EEC
for safety / of CSA and UL	CAN/CSA C22.2 & UL 60950-1, UL 1950
for emitted interference	EN 61000-6-3
for interference immunity	EN 61000-6-2
Verification of suitability
CE mark	Yes
C-Tick	Yes
Accessories
Accessories	optional: MPI cable