USB-CIF31 Omron USB to RS232 adapter
![](/ads/contact.jpg)
↵Introduction to USB-CIF31
Convert cable from USB to RS232(standard DTE interface).1 meter,with communication indicator,support traditional RS232 PLC prgramming cables.
USB-CIF31 is the real USB to RS232 interface converters. Under the control of computer-driven driver, the programming cable makes it possible for the computer's USB interface to simulate the traditional serial (known as COM interface), thus various existing programming software such as communications software, monitoring software and other applications can be normally used. The working power supply of this cable is directly from the USB port, but not the PLC programming interface. The two-color LED on the converter box indicates data’s transceiving status.
The RS232 ports of the USB-CIF31 are standard DTE interface (DB9M-Block, the same with the computer's serial port RS232). Its signal as shown below:
Pin |
signal |
Description |
1 |
DCD |
Carrier signal |
2 |
RXD |
Receive data |
3 |
TXD |
Sent data |
4 |
DTR |
Data ready |
5 |
GND |
Signal GND |
6 |
DSR |
MODEM ready |
7 |
RTS |
request |
8 |
CTS |
clean |
9 |
RI |
Ringing signal |
USB-CIF31 do a very good simulation as a RS232 serial port, and even direct operate hardware by I/O. for the user,just like to visit the physical RS232 ports. USB-CIF31 can be used to support majority of the traditional PLC cable programming, and this point is different from similar products on the market .the appendix will show the test results of the USB-CIF31 connection with various traditional RS232 interfaces with PLC programming cable communications.
Features and technological index:
● the operating system can support of the USB-CIF31 : Windows2000/XP (WinNT4/95/98/Me/DOS does not support)
● fully compatible with USB V1.1 and norms of USB CDC V1.1
● USB bus powered, the current consumption is about 50 mA
● baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baud rate
● support UART data format: data bits: 7-8, stop bit: 1, 2, check-bit: odd / even / no parity
● each PC only support a USB-CIF31
● temperature: -20 ~ +75 ℃
● Cable length: 1 m, colors: black
Usage of USB-CIF31:
USB device drivers should be installed before using USB-CIF31 programming cable, which are available on the CD-ROM sold together with the cable. And for the specific installation steps, please refer to the instruction files on the CD-ROM drivers, and details are not necessarily listed here.
After completing Driver installation, the corresponding COM port for the USB-CIF31 programming cable will be displayed in the “Device Manager” of Window. The step next is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings. And the following steps are exactly the same as in the traditional programming cables with RS232 interfaces..
Appendix of USB-CIF31:
the success test data of the USB-CIF31 connecting with the traditional PLC programming cable (Win2000/XP operating system)
PLC |
Traditional cable programming |
Programming software version |
Mitsubishi FX series |
SC-09 |
FXGP/WIN V1.0、GPP V4.0、GX-Developer |
Mitsubishi A series |
SC-09 |
GPP V4.0、GX Developer |
Fujitsu NB0 |
NN-CNV3 |
Flex V1.0 |
Matsushita FP0, FP1, FP3 |
AFP8550/8513 |
FPSOFT V1.1 |
Omron PLC |
FS-CIF02和XW2Z-200S |
CX-Programmer V1.2 |
Siemens LOGO! |
PC-CABLE |
LOGO! Soft V4.0 |
SiemensS7-200 |
PC/PPI |
STEP7 Micro/WIN V4.0 |
Siemens S7-300 |
PC/MPI |
STEP7 V5.3 |
GE 90-30 series PLC |
IC690ACC901 |
CIMPLICITY ME V5.0 |
Delta DVP Series PLC |
DVPACAB230 |
WPLSoft V2.03 |
A-B SLC Series |
1747-PIC |
FPSOFT V1.0 |
The quality is guaranteed.It's tested before shippment.Not made by Omron,OEM product as the replacement.
Part#: USB-CIF31
More compatible Mitsubishi cable & communication board
Pictures for your reference:
Of course, we also can supply some compatible PLC Programming cables of ohter brands, such as Siemens/OMRON/Panasonic/GE/Fuji/Schneider/Allen-Bradley/Delta/Proface…
More pictures:
Please feel free to contact me for any question!
Contact person: Miss Nancy
E-mail: nancy@kollewin.com
Tel: +86-0755-26898905-8006
Website: www.kollewin.com
Recent Comments